Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2010 (2010), Article ID 194102, 6 pages
http://dx.doi.org/10.1155/2010/194102
Research Article

Porosity and Mechanical Strength of an Autoclaved Clayey Cellular Concrete

1Department of Mechanical Engineering (EMC), Federal University of Santa Catarina (UFSC), 88040-900 Florianópolis, SC, Brazil
2Department of Civil Engineering (ECV), Federal University of Santa Catarina (UFSC), 88040-900 Florianópolis, SC, Brazil
3Department of Chemical Engineering (EQA), Federal University of Santa Catarina (UFSC), 88040-900 Florianópolis, SC, Brazil

Received 7 February 2010; Accepted 11 May 2010

Academic Editor: Abir Al-Tabbaa

Copyright © 2010 P. O. Guglielmi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. W. Grutzek, “Cellular concrete,” in Cellular Ceramics: Structure, Manufacturing, Properties and Applications, M. Scheffler and P. Colombo, Eds., pp. 193–223, John Wiley & Sons, Weinheim, Germany, 2005. View at Google Scholar
  2. Toolbase Services, “Autoclaved Aerated Concrete (AAC): manufactured building block made of all-natural raw materials,” May 2010, http://www.toolbase.org/techinventory/techdetails.aspx?contentdetailid=690.
  3. P. J. Tikalsky, J. Pospisil, and W. MacDonald, “A method for assessment of the freeze-thaw resistance of preformed foam cellular concrete,” Cement and Concrete Research, vol. 34, no. 5, pp. 889–893, 2004. View at Publisher · View at Google Scholar
  4. S. Lavalle, “Cellular concrete to the rescue,” May 2010, http://www.cellular-concrete.com.
  5. N. Narayanan and K. Ramamurthy, “Microstructural investigations on aerated concrete,” Cement and Concrete Research, vol. 30, no. 3, pp. 457–464, 2000. View at Publisher · View at Google Scholar
  6. M. S. Goual, A. Bali, F. de Barquin, R. M. Dheilly, and M. Quéneudec, “Isothermal moisture properties of Clayey Cellular Concretes elaborated from clayey waste, cement and aluminium powder,” Cement and Concrete Research, vol. 36, no. 9, pp. 1768–1776, 2006. View at Publisher · View at Google Scholar
  7. M. S. Goual, A. Bali, and M. Quéneudec, “Effective thermal conductivity of clayey aerated concrete in the dry state: experimental results and modelling,” Journal of Physics D, vol. 32, no. 23, pp. 3041–3046, 1999. View at Publisher · View at Google Scholar
  8. M. S. Goual, F. De Barquin, M. L. Benmalek, A. Bali, and M. Quéneudec, “Estimation of the capillary transport coefficient of Clayey Aerated Concrete using a gravimetric technique,” Cement and Concrete Research, vol. 30, no. 10, pp. 1559–1563, 2000. View at Publisher · View at Google Scholar
  9. L. J. Gibson and M. F. Ashby, Cellular Solids—Structure and Properties, Cambridge University Press, Cambridge, UK, 2nd edition, 2001.
  10. NBR 13439, Blocos de Concreto Celular Autoclavado—Verificação da Resistência à Compressão, ABNT, Rio de Janeiro, Brazil, 1995.
  11. N. Shinohara, M. Okumiya, T. Hotta, K. Nakahira, M. Naito, and K. Uematsu, “Morphological changes in process-related large pores of granular compacted and sintered alumina,” Journal of the American Ceramic Society, vol. 83, no. 7, pp. 1633–1640, 2000. View at Google Scholar
  12. X. Huang, D. Jiang, and S. Tan, “Novel hydrothermal synthesis method for tobermorite fibers and investigation on their thermal stability,” Materials Research Bulletin, vol. 37, no. 11, pp. 1885–1892, 2002. View at Publisher · View at Google Scholar
  13. X. Huang, D. Jiang, and S. Tan, “Novel hydrothermal synthesis of tobermorite fibers using Ca(II)-EDTA complex precursor,” Journal of the European Ceramic Society, vol. 23, no. 1, pp. 123–126, 2003. View at Publisher · View at Google Scholar