Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2012, Article ID 582472, 16 pages
http://dx.doi.org/10.1155/2012/582472
Research Article

Health Assessment of Large Two Dimensional Structures Using Limited Information: Recent Advances

1Department of Civil Engineering and Engineering Mechanics, University of Arizona, P.O. Box 210072, Tucson, AZ 85721, USA
2Department of Civil Engineering, Bengal Engineering and Science University, Howrah, 711103 WB, India

Received 2 March 2011; Revised 24 May 2011; Accepted 8 June 2011

Academic Editor: Alessandro Marzani

Copyright © 2012 Ajoy Kumar Das et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. “Redefining Global Infrastructure, Nuveen Investments,” http://www. nuveen.com/Home/Documents/Viewer.aspx?fileId=51010.
  2. “Report Card for American Infrastructure,” 2005, http://apps.asce.org/reportcard/2005/index2005.cfm.
  3. “Global Infrastructure Spending to Reach $35 Trillion Over the Next 20 Years,” http://moneymorning.com/2009/02/05/infrastructure-stimulus-2/.
  4. S. Saadat, M. N. Noori, G. D. Buckner, T. Furukawa, and Y. Suzuki, “Structural health monitoring and damage detection using an intelligent parameter varying (IPV) technique,” International Journal of Non-Linear Mechanics, vol. 39, no. 10, pp. 1687–1697, 2004. View at Publisher · View at Google Scholar · View at Scopus
  5. T. V. Anh, Enhancements to the damage locating vector method for structural health monitoring, Ph. D. dissertation, National University of Singapore, Singapore, 2009.
  6. D. Wang and A. Haldar, “An element level SI with unknown input information,” Journal of Engineering Mechanics, vol. 120, no. 1, pp. 159–176, 1994. View at Google Scholar · View at Scopus
  7. X. Ling and A. Haldar, “Element level system identification with unknown input with Rayleigh damping,” Journal of Engineering Mechanics, vol. 130, no. 8, pp. 877–885, 2004. View at Publisher · View at Google Scholar · View at Scopus
  8. M. Katkhuda, R. Martinez-Flores, and A. Haldar, “Health assessment at local level with unknown input excitation,” Journal of Structural Engineering, vol. 131, no. 6, pp. 956–965, 2005. View at Publisher · View at Google Scholar · View at Scopus
  9. A. Rytter, Vibration based inspection of civil engineering structures, Ph. D. dissertation, Department of Building Technology and Structural Engineering, Aalborg University, Denmark, 1993.
  10. J. S. Lew, J. N. Juang, and R. W. Longman, “Comparison of several system identification methods for flexible structures,” Journal of Sound and Vibration, vol. 167, no. 3, pp. 461–480, 1993. View at Publisher · View at Google Scholar · View at Scopus
  11. R. Ghanem and M. Shinozuka, “Structural-system identification—I: theory,” Journal of Engineering Mechanics, vol. 121, no. 2, pp. 255–264, 1995. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Shinozuka and R. Ghanem, “Structural system identification—II: experimental verification,” Journal of Engineering Mechanics, vol. 121, no. 2, pp. 265–273, 1995. View at Publisher · View at Google Scholar · View at Scopus
  13. S. W. Doebling, C. R. Farrar, M. B. Prime, and D. W. Shevitz, “Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review,” Tech. Rep. LA-13070-MS, Los Alamos National Laboratory, 1996. View at Google Scholar
  14. C. R. Farrar, S. W. Doebling et al., “A review of modal-based damage identification procedures,” Tech. Rep. LA-UR-97-2468, Los Alamos National Laboratory, 1997. View at Google Scholar
  15. O. S. Salawu, “Detection of structural damage through changes in frequency: a review,” Engineering Structures, vol. 19, no. 9, pp. 718–723, 1997. View at Google Scholar · View at Scopus
  16. E. P. Carden and P. Fanning, “Vibration based condition monitoring: a review,” Structural Health Monitoring, vol. 3, no. 4, pp. 355–377, 2004. View at Publisher · View at Google Scholar · View at Scopus
  17. H. Sohn, C. R. Farrar, F. M. Hemez et al., “A review of structural health monitoring literature: 1996–2001,” Tech. Rep. LA-13976-MS, Los Alamos National Laboratory, 2004. View at Google Scholar
  18. J. Humar, A. Bagchi, and H. Xu, “Performance of vibration-based techniques for the identification of structural damage,” Structural Health Monitoring, vol. 5, no. 3, pp. 215–241, 2006. View at Publisher · View at Google Scholar · View at Scopus
  19. G. Kerschen, K. Worden, A. F. Vakakis, and J. C. Golinval, “Past, present and future of nonlinear system identification in structural dynamics,” Mechanical Systems and Signal Processing, vol. 20, no. 3, pp. 505–592, 2006. View at Publisher · View at Google Scholar · View at Scopus
  20. H. A. Nasrellah, Dynamic state estimation techniques for identification of parameters of finite element structural models, Ph. D. dissertation, Indian Institute of Science, Bangalore, India, 2009.
  21. W. Fan and P. Qiao, “Vibration-based damage identification methods: a review and comparative study,” Structural Health Monitoring, vol. 10, no. 1, pp. 83–111, 2011. View at Publisher · View at Google Scholar
  22. K. Worden and J. M. Dulieu-Barton, “An overview of intelligent fault detection in systems and structures,” Structural Health Monitoring, vol. 3, no. 1, pp. 85–98, 2004. View at Google Scholar · View at Scopus
  23. C. R. Farrar and K. Worden, “An introduction to structural health monitoring,” Philosophical Transactions of the Royal Society A, vol. 365, no. 1851, pp. 303–315, 2007. View at Publisher · View at Google Scholar · View at PubMed · View at Scopus
  24. P. C. Chang, A. Flatau, and S. C. Liu, “Review paper: health monitoring of civil infrastructure,” Structural Health Monitoring, vol. 2, no. 3, pp. 257–267, 2003. View at Publisher · View at Google Scholar · View at Scopus
  25. K. Worden, C. R. Farrar, G. Manson, and G. Park, “The fundamental axioms of structural health monitoring,” Proceedings of the Royal Society A, vol. 463, no. 2082, pp. 1639–1664, 2007. View at Publisher · View at Google Scholar · View at Scopus
  26. M. I. Friswell, “Damage identification using inverse methods,” Philosophical Transactions of the Royal Society A, vol. 365, no. 1851, pp. 393–410, 2007. View at Publisher · View at Google Scholar · View at PubMed · View at Scopus
  27. P. S. Maybeck, Stochastic Models, Estimation, and Control Theory, chapter 1, Academic Press, UK, 1979.
  28. R. E. Kalman, “A new approach to linear filtering and prediction problems,” Transaction of the ASME, Journal of Basic Engineering, vol. 82, pp. 35–45, 1960. View at Google Scholar
  29. R. E. Kalman and R. Bucy, “New results in linear filtering and prediction theory,” ASME Journal of Basic Engineering, vol. 83, pp. 95–108, 1961. View at Google Scholar
  30. A. H. Jazwinski, Stochastic Process and Filtering Theory, Academic Press, UK, 1970.
  31. G. Welch and G. Bishop, “An introduction to the Kalman filter,” Tech. Rep. TR95-041, Department of Computer Science, University of North Carolina at Chapel Hill, Chapel Hill, NC, USA, 1995. View at Google Scholar
  32. G. F. Welch, “History: the use of the Kalman filter for human motion tracking in virtual reality,” Presence: Teleoperators and Virtual Environments, vol. 18, no. 1, pp. 72–91, 2009. View at Publisher · View at Google Scholar · View at Scopus
  33. D. Simon, Optimal State Estimation: Kalman, H and Nonlinear Approaches, John Wiley and Sons, Hoboken, NJ, USA, 2006.
  34. R. E. Kopp and R. J. Orford, “Linear regression applied to system identification for adaptive control systems,” AIAA Journal, vol. 1, no. 10, pp. 2300–2306, 1963. View at Google Scholar
  35. H. Cox, “On the estimation of state variables and parameters for noisy dynamic systems,” IEEE Transactions on Automatic Control, vol. 9, no. 1, pp. 5–12, 1964. View at Google Scholar
  36. C. H. Loh and Y. H. Tsaur, “Time domain estimation of structural parameters,” Engineering Structures, vol. 10, no. 2, pp. 95–105, 1988. View at Google Scholar · View at Scopus
  37. K. V. Yuen, K. I. Hoi, and K. M. Mok, “Selection of noise parameters for Kalman filter,” Earthquake Engineering and Engineering Vibration, vol. 6, no. 1, pp. 49–56, 2007. View at Publisher · View at Google Scholar · View at Scopus
  38. R. Tipireddy, H. A. Nasrellah, and C. S. Manohar, “A Kalman filter based strategy for linear structural system identification based on multiple static and dynamic test data,” Probabilistic Engineering Mechanics, vol. 24, no. 1, pp. 60–74, 2009. View at Publisher · View at Google Scholar · View at Scopus
  39. C. B. Yun and M. Shinozuka, “Identification of nonlinear structural dynamic systems,” Journal of Structural Mechanics, vol. 8, no. 2, pp. 187–203, 1980. View at Google Scholar · View at Scopus
  40. C. G. Koh, L. M. See, and T. Balendra, “Determination of storey stiffness of three-dimensional frame buildings,” Engineering Structures, vol. 17, no. 3, pp. 179–186, 1995. View at Google Scholar · View at Scopus
  41. A. Corigliano and S. Mariani, “Parameter identification in explicit structural dynamics: performance of the extended Kalman filter,” Computer Methods in Applied Mechanics and Engineering, vol. 193, no. 36-38, pp. 3807–3835, 2004. View at Publisher · View at Google Scholar · View at Scopus
  42. M. Hoshiya and E. Saito, “Structural identification by extended Kalman filter,” Journal of Engineering Mechanics, vol. 110, no. 12, pp. 1757–1772, 1984. View at Google Scholar · View at Scopus
  43. K. Toki, T. Sato, and J. Kiyono, “Identification of structural parameters and input ground motion from response time histories,” Structural Engineering / Earthquake Engineering, vol. 6, no. 2, pp. 413–421, 1989. View at Google Scholar
  44. L. Jeen-Shang and Z. Yigong, “Nonlinear structural identification using extended kalman filter,” Computers and Structures, vol. 52, no. 4, pp. 757–764, 1994. View at Google Scholar · View at Scopus
  45. M. Hoshiya and O. Maruyama, “Identification of running load and beam system,” Journal of Engineering Mechanics, vol. 113, no. 6, pp. 813–824, 1987. View at Google Scholar · View at Scopus
  46. Chan Ghee Koh, Lin Ming See, and Thambirajah Balendra, “Estimation of structural parameters in time domain: a substructure approach,” Earthquake Engineering & Structural Dynamics, vol. 20, no. 8, pp. 787–801, 1991. View at Google Scholar · View at Scopus
  47. A. W. C. Oreta and T. A. Tanabe, “Localized identification of structures by Kalman filter,” Structural Engineering/Earthquake Engineering, vol. 9, no. 4, pp. 217–226, 1993. View at Google Scholar · View at Scopus
  48. A. W. C. Oreta and T. A. Tanabe, “Element identification of member properties of framed structures,” Journal of Structural Engineering, vol. 120, no. 7, pp. 1961–1975, 1994. View at Google Scholar · View at Scopus
  49. C. G. Koh and L. M. See, “Identification and uncertainty estimation of structural parameters,” Journal of Engineering Mechanics, vol. 120, no. 6, pp. 1219–1236, 1994. View at Google Scholar · View at Scopus
  50. J. N. Yang, S. Lin, H. Huang, and L. Zhou, “An adaptive extended Kalman filter for structural damage identification,” Structural Control and Health Monitoring, vol. 13, no. 4, pp. 849–867, 2006. View at Publisher · View at Google Scholar · View at Scopus
  51. J. N. Yang, S. Pan, and H. Huang, “An adaptive extended Kalman filter for structural damage identifications II: unknown inputs,” Structural Control and Health Monitoring, vol. 14, no. 3, pp. 497–521, 2007. View at Publisher · View at Google Scholar · View at Scopus
  52. L. Zhou, S. Wu, and J. N. Yang, “Experimental study of an adaptive extended Kalman filter for structural damage identification,” Journal of Infrastructure Systems, vol. 14, no. 1, pp. 42–51, 2008. View at Publisher · View at Google Scholar · View at Scopus
  53. M. Hoshiya and A. Sutoh, “Kalman Filter—finite element method in identification,” Journal of Engineering Mechanics, vol. 119, no. 2, pp. 197–210, 1993. View at Google Scholar · View at Scopus
  54. S. J. Ghosh, D. Roy, and C. S. Manohar, “New forms of extended Kalman filter via transversal linearization and applications to structural system identification,” Computer Methods in Applied Mechanics and Engineering, vol. 196, no. 49-52, pp. 5063–5083, 2007. View at Publisher · View at Google Scholar · View at Scopus
  55. X. Liu, P. J. Escamilla-Ambrosio, and N. A. J. Lieven, “Extended Kalman filtering for the detection of damage in linear mechanical structures,” Journal of Sound and Vibration, vol. 325, no. 4-5, pp. 1023–1046, 2009. View at Publisher · View at Google Scholar · View at Scopus
  56. D. Wang and A. Haldar, “System identification with limited observations and without input,” Journal of Engineering Mechanics, vol. 123, no. 5, pp. 504–510, 1997. View at Google Scholar · View at Scopus
  57. D. Wang, Element level time domain system identification techniques with unknown input information, Ph. D. dissertation, Department of Civil Engineering and Engineering Mechanics, University of Arizona, Tucson, Ariz, USA, 1995.
  58. K. Katkhuda and A. Haldar, “A novel health assessment technique with minimum information,” Structural Control and Health Monitoring, vol. 15, no. 6, pp. 821–838, 2008. View at Publisher · View at Google Scholar · View at Scopus
  59. H. Katkhuda, In-service health assessment of real structures at the element level with unknown input and limited global responses, Ph. D. dissertation, Department of Civil Engineering and Engineering Mechanics, University of Arizona, Tucson, Ariz, USA, 2004.
  60. A. Haldar and A. K. Das, “Prognosis of structural health: non-destructive methods,” International Journal of Performability Engineering, vol. 6, no. 5, pp. 487–498, 2010. View at Google Scholar
  61. R. Martinez-Flores, Damage assessment potential of a novel system identification technique—experimental verification, Ph. D. dissertation, Department of Civil Engineering and Engineering Mechanics, University of Arizona, Tucson, Ariz, USA, 2005.
  62. R. Martinez-Flores and A. Haldar, “Experimental verification of a structural health assessment method without excitation information,” Journal of Structural Engineering, vol. 34, no. 1, pp. 33–39, 2007. View at Google Scholar · View at Scopus
  63. R. Martinez-Flores, H. Katkhuda, and A. Haldar, “A novel health assessment technique with minimum information: verification,” International Journal of Performability Engineering, vol. 4, no. 2, pp. 121–140, 2008. View at Google Scholar
  64. A. Haldar, R. Martinez-Flores, and H. Katkhuda, “Crack detection in existing structures using noise-contaminated dynamic responses,” Theoretical and Applied Fracture Mechanics, vol. 50, no. 1, pp. 74–80, 2008. View at Publisher · View at Google Scholar · View at Scopus
  65. P. H. Vo and A. Haldar, “Post-processing of linear accelerometer data in structural identification,” Journal of Structural Engineering, vol. 30, no. 2, pp. 123–130, 2003. View at Google Scholar · View at Scopus
  66. R. W. Clough and J. Penzien, Dynamics of structures, McGraw-Hill, New York, NY, USA, 2nd edition, 1993.
  67. ANSYS version 11.0, The Engineering Solutions Company, 2007.