Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2013, Article ID 179712, 9 pages
http://dx.doi.org/10.1155/2013/179712
Research Article

Mechanical Parameters and Post-Cracking Behaviour of HPFRC according to Three-Point and Four-Point Bending Test

Department of Civil Engineering, University of Calabria, Via P. Bucci, Cubo 39/B, 87036 Rende, Italy

Received 7 September 2012; Revised 2 September 2013; Accepted 16 September 2013

Academic Editor: Ashraf F. Ashour

Copyright © 2013 Francesco Bencardino. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. A. Mansur, M. S. Chin, and T. H. Wee, “Stress-strain relationship of high-strength fiber concrete in compression,” Journal of Materials in Civil Engineering, vol. 11, no. 1, pp. 21–29, 1999. View at Publisher · View at Google Scholar · View at Scopus
  2. G. Campione and L. La Mendola, “Behavior in compression of lightweight fiber reinforced concrete confined with transverse steel reinforcement,” Cement and Concrete Composites, vol. 26, no. 6, pp. 645–656, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. F. Bencardino, L. Rizzuti, G. Spadea, and R. N. Swamy, “Stress-strain behavior of steel fiber-reinforced concrete in compression,” Journal of Materials in Civil Engineering, vol. 20, no. 3, pp. 255–263, 2008. View at Publisher · View at Google Scholar · View at Scopus
  4. M. T. Kazemi, F. Fazileh, and M. A. Ebrahiminezhad, “Cohesive crack model and fracture energy of steel-fiber-reinforced-concrete notched cylindrical specimens,” Journal of Materials in Civil Engineering, vol. 19, no. 10, pp. 884–890, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. N. M. Long and R. Marian, “Investigation of fracture properties of steel fiber reinforced concrete,” in Proceeding of the 3rd ACF International Conference, ACF/VCA, pp. 854–861, 2008.
  6. F. Bencardino, L. Rizzuti, G. Spadea, and R. N. Swamy, “Experimental evaluation of fiber reinforced concrete fracture properties,” Composites B, vol. 41, no. 1, pp. 17–24, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. RILEM TC 162-TDF, “Test and design method for steel fibre reinforced concrete. σ-ε design method. Recommendation,” Materials and Structures, vol. 33, no. 226, pp. 75–81, 2000. View at Google Scholar
  8. RILEM TC 162-TDF, “Test and design method for steel fibre reinforced concrete. Bending test. Final recommendation,” Materials and Structures, vol. 35, no. 253, pp. 579–582, 2002. View at Google Scholar
  9. RILEM TC 162-TDF, “Test and design method for steel fibre reinforced concrete. σ-ε design method. Final recommendation,” Materials and Structures, vol. 36, no. 262, pp. 560–567, 2003. View at Google Scholar
  10. UNI 11039-1, Steel Fibre Reinforced Concrete-Definitions, Classification and Designation, 2003.
  11. UNI 11039-2, Steel Fibre Reinforced Concrete—Test Method for Determination of First Crack Strength and Ductility Indexes, 2003.
  12. ASTM C 1550, Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel), 2010.
  13. ASTM C 1609, Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam with Third-Point Loading), 2010.
  14. ASTM C 1399, Standard Test Method for Obtaining Average Residual Strength of Fiber Reinforced Concrete, 2010.
  15. EN 14651, Test method for metallic fibre concrete—Measuring the flexural tensile strength (limit of proportionality (LOP), residual). European Committee for Standardization, B-1050 Brussels, September 2007.
  16. M. di Prisco, G. Plizzari, and L. Vandewalle, “Fiber reinforced concrete in the new FIB model code,” in Proceedings of the 3rd fib International Congress, Gaylord National Resort, May 2010.
  17. CNR-DT 204, Guidelines for the Design, Construction and Production Control of Fiber Reinforced Concrete Structures, CNR, Rome, Italy, 2007.
  18. Fib 55. Model code 2010. Bullettin 55. First complete draft 2010.
  19. B. Parmentier, L. Vandewalle, and F. van Rickstal, “Evaluation of the scatter of the postpeak behaviour of fibre reinforced concrete in bending: a step toward reliability,” in Proceeding of the 7th RILEM International Symposium on Fibre Reinforced Concrete: Design and Applications (BEFIB '08), pp. 133–143, 2008.
  20. R. Hameed, A. Turatsinze, F. Duprat, and A. Sellier, “Metallic fiber reinforced concrete: effect of fiber aspect ratio on the flexural properties,” Journal of Engineering and Applied Sciences, vol. 4, no. 5, pp. 67–72, 2009. View at Google Scholar · View at Scopus
  21. UNI EN 12390-3, Testing Hardened Concrete—Compressive Strength of Test Specimens, 2003.