Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2014 (2014), Article ID 684256, 14 pages
http://dx.doi.org/10.1155/2014/684256
Research Article

Evolutionary Modeling to Evaluate the Shear Behavior of Circular Reinforced Concrete Columns

Department of Science of Civil Engineering and Architecture, Technical University of Bari (Politecnico di Bari), Via Orabona 4, 70125 Bari, Italy

Received 27 February 2014; Revised 4 August 2014; Accepted 18 August 2014; Published 7 September 2014

Academic Editor: Hossein Moayedi

Copyright © 2014 Alessandra Fiore et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Fiore, D. Foti, P. Monaco, D. Raffaele, and G. Uva, “An approximate solution for the rheological behavior of non-homogeneous structures changing the structural system during the construction process,” Engineering Structures, vol. 46, pp. 631–642, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. A. Fiore, G. Marano, and P. Monaco, “Earthquake-induced lateral-torsional pounding between two equal height multi-storey buildings under multiple bi-directional ground motions,” Advances in Structural Engineering, vol. 16, no. 5, pp. 845–865, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. A. Fiore, P. Monaco, and D. Raffaele, “Viscoelastic behaviour of non-homogeneous variable-section beams with post-poned restraints,” Computers and Concrete, vol. 9, no. 5, pp. 357–374, 2012. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Fiore and P. Monaco, “Analysis of the seismic vulnerability of the “Quinto Orazio Flacco” school in Bari (Italy),” Ingegneria Sismica, vol. 2011, no. 1, pp. 43–62, 2011. View at Google Scholar · View at Scopus
  5. A. Fiore and P. Monaco, “Earthquake-induced pounding between the main buildings of the “Quinto Orazio Flacco” school,” Earthquake and Structures, vol. 1, no. 4, pp. 371–390, 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. A. Fiore and P. Monaco, “POD-based representation of the alongwind equivalent static force for long-span bridges,” Wind and Structures, vol. 12, no. 3, pp. 239–257, 2009. View at Publisher · View at Google Scholar · View at Scopus
  7. M. M. Tahir, P. N. Shek, A. Sulaiman, and C. S. Tan, “Experimental investigation of short cruciform columns using universal beam sections,” Construction and Building Materials, vol. 23, no. 3, pp. 1354–1364, 2009. View at Publisher · View at Google Scholar · View at Scopus
  8. A. B. Ghee, M. J. N. Priestley, and T. Paulay, “Seismic shear strength of circular reinforced concrete columns,” ACI Structural Journal, vol. 86, no. 1, pp. 45–59, 1989. View at Google Scholar · View at Scopus
  9. M. J. N. Priestley, R. Verma, and Y. Xiao, “Seismic shear strength of reinforced concrete columns,” ASCE: Journal of Structural Engineering, vol. 120, no. 8, pp. 2310–2329, 1994. View at Publisher · View at Google Scholar · View at Scopus
  10. Y.-L. Wong, T. Paulay, and M. J. N. Priestley, “Response of circular reinforced concrete columns to multi-directional seismic attack,” ACI Structural Journal, vol. 90, no. 2, pp. 180–191, 1993. View at Google Scholar · View at Scopus
  11. M. J. Kowalsky and M. J. N. Priestley, “Improved analytical model for shear strength of circular reinforced concrete columns in seismic regions,” ACI Structural Journal, vol. 97, no. 3, pp. 388–396, 2000. View at Google Scholar · View at Scopus
  12. M. P. Collins, E. C. Bentz, and Y. J. Kim, “Shear strength of circular reinforced concrete columns,” in S. M. Uzumeri Symposium: Behavior and Design of Concrete Structures for Seismic Performance, pp. 45–86, ACI, Farmington Hills, Mich, USA, 2002. View at Google Scholar
  13. F. J. Vecchio and M. P. Collins, “The modified compression-field theory for reinforced concrete elements subjected to shear,” Journal of the American Concrete Institute, vol. 83, no. 2, pp. 219–231, 1986. View at Google Scholar · View at Scopus
  14. E. C. Bentz, F. J. Vecchio, and M. P. Collins, “Simplified modified compression field theory for calculating shear strength of reinforced concrete elements,” ACI Structural Journal, vol. 103, no. 4, pp. 614–624, 2006. View at Google Scholar · View at Scopus
  15. American Association of State Highway and Transportation Official, AASHTO LRFD Bridge Design Specifications, 4th edition, 2007.
  16. J. Turmo, G. Ramos, and A. C. Aparicio, “Shear truss analogy for concrete members of solid and hollow circular cross section,” Engineering Structures, vol. 31, no. 2, pp. 455–465, 2009. View at Publisher · View at Google Scholar · View at Scopus
  17. I. Merta, “Shear strength model of reinforced concrete circular cross-section members,” in Vortrag : Third International Conference on Structural Engineering Mechanics and Computation, Cape Town, South Africa; Recent Developments in Structural Engineering, Mechanics and Computation, A. Zingoni, Ed., Millpress Science Publishers, Rotterdam, The Netherlands, 2007. View at Google Scholar
  18. J. L. Clarke and F. K. Birjandi, “The behaviour of reinforced concrete circular sections in shear,” The Structural Engineer, vol. 71, no. 5, pp. 73–81, 1993. View at Google Scholar · View at Scopus
  19. M. J. F. Capon and R. D. Cossio, “Diagonal tension in concrete members of circular section,” Tech. Rep. 466, Portland Cement Association, Foreign Literature Study, 1965. View at Google Scholar
  20. J. U. Khalifa and M. P. Collins, “Circular reinforced concrete members subjected to shear,” Publication 81-08, Department of Civil Engineering, University of Toronto, 1981. View at Google Scholar
  21. Y. Nagato, Shear Strength of Reinforced Concrete Members with Circular Cross-Section, Federal University of Rio de Janeiro.
  22. M. J. N. Priestley, F. Seible, and M. Calvi, Seismic Design and Retrofit of Bridges, John Wiley & Sons, New York, NY, USA, 1996.
  23. J. H. Lee, S. H. Ko, and J. H. Choi, “Shear strength and capacity protection of RC bridge columns,” in Proceedings of ANCER 2004, Hawaii, Hawaii, USA, 2004.
  24. U. G. Jensen and L. C. Hoang, “Shear strength prediction of circular RC members by the crack sliding model,” Magazine of Concrete Research, vol. 61, no. 9, pp. 691–703, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. O. Giustolisi and D. A. Savic, “A symbolic data-driven technique based on evolutionary polynomial regression,” Journal of Hydroinformatics, vol. 8, no. 3, pp. 207–222, 2006. View at Publisher · View at Google Scholar · View at Scopus
  26. L. Berardi, Z. Kapelan, O. Giustolisi, and D. A. Savic, “Development of pipe deterioration models for water distribution systems using EPR,” Journal of Hydroinformatics, vol. 10, no. 2, pp. 113–126, 2008. View at Publisher · View at Google Scholar · View at Scopus
  27. A. Doglioni, D. Mancarella, V. Simeone, and O. Giustolisi, “Inferring groundwater system dynamics from hydrological time-series data,” Hydrological Sciences Journal, vol. 55, no. 4, pp. 593–608, 2010. View at Publisher · View at Google Scholar · View at Scopus
  28. A. Fiore, L. Berardi, and G. C. Marano, “Predicting torsional strength of RC beams by using Evolutionary Polynomial Regression,” Advances in Engineering Software, vol. 47, no. 1, pp. 178–187, 2012. View at Publisher · View at Google Scholar · View at Scopus
  29. O. Giustolisi and D. A. Savic, “Advances in data-driven analyses and modelling using EPR-MOGA,” Journal of Hydroinformatics, vol. 11, no. 3-4, pp. 225–236, 2009. View at Publisher · View at Google Scholar · View at Scopus
  30. E. Mörsch, Der Eisenbetonbau—Seine Theorie und Anwendung, Konrad Wittwer, Stuttgart, Germany, 1922.
  31. M. P. Nielsen, Limit Analysis and Concrete Plasticity, Prentice-Hall Series in Civil Engineering, Prentice-Hall, Englewood Cliffs, NJ, USA, 1984.
  32. “Eurocode 2: design of concrete structures, prEN , 1992-1-1, draft for stage 49,” European Standard, Commission of the European Communities, European Committee for Standardization, 2002.
  33. BS 8100, Structural Use of Concrete: Part I: Code of Practice for Design and Construction, British Standards Institution, London, UK, 1985.
  34. “Steel, concrete and composite bridges, part 4: code of practice for design of concrete bridges,” BS 5400, British Standards Institution, London, UK, 1990.
  35. A. N. Dancygier, “Shear carried by transverse reinforcement in circular RC elements,” Journal of Structural Engineering, vol. 127, no. 1, pp. 81–83, 2001. View at Publisher · View at Google Scholar · View at Scopus
  36. J. H. Kim and J. B. Mander, “Theoretical shear strength of concrete columns due to transverse steel,” Journal of Structural Engineering, vol. 131, no. 1, pp. 197–199, 2005. View at Publisher · View at Google Scholar · View at Scopus
  37. ACI 318-M-08. Building Code Requirements for Structural Concrete (ACI 318M-08) and Commentary, American Concrete Institute, 2008.
  38. Y. J. Kim, The shear response of circular columns reinforced with high strength spirals [M.S. thesis], Department of Civil Engineering, University of Toronto, 2000.
  39. G. C. Marano, R. Greco, G. Quaranta, A. Fiore, J. Avakian, and D. Cascella, “Parametric identification of nonlinear devices for seismic protection using soft computing techniques,” Advanced Materials Research, vol. 639-640, no. 1, pp. 118–129, 2013. View at Publisher · View at Google Scholar · View at Scopus
  40. G. Quaranta, A. Fiore, and G. C. Marano, “Optimum design of prestressed concrete beams using constrained differential evolution algorithm,” Structural and Multidisciplinary Optimization, vol. 49, no. 3, pp. 441–453, 2014. View at Publisher · View at Google Scholar · View at Scopus
  41. J. H. Holland, Adaptation in Natural and Artificial Systems, The University of Michigan Press, Ann Arbor, Mich, USA, 1975. View at MathSciNet
  42. N. R. Draper and H. Smith, Applied Regression Analysis, John Wiley & Sons, New York, NY, USA, 1998. View at MathSciNet
  43. D. E. Goldberg, Genetic Algorithms in Search, Optimization and Machine Learning, Addison-Wesley, London, UK, 1989.
  44. V. Pareto, Cours D'Economie Politique. Rouge and Cic , Vol. I and II, Lausanne, Switzerland, 1896.
  45. D. Laucelli and O. Giustolisi, “Scour depth modelling by a multi-objective evolutionary paradigm,” Environmental Modelling and Software, vol. 26, no. 4, pp. 498–509, 2011. View at Publisher · View at Google Scholar · View at Scopus
  46. D. M. LL. PP. 9 Gennaio 1996, Norme tecniche per il calcolo, l’esecuzione ed il collaudo delle strutture in cemento armato normale e precompresso e per le strutture metalliche, 1996 (Italian).