Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2016 (2016), Article ID 1035946, 11 pages
http://dx.doi.org/10.1155/2016/1035946
Research Article

Design of Normal Concrete Mixtures Using Workability-Dispersion-Cohesion Method

Civil Engineering Department, The Hashemite University, Zarqa 13133, Jordan

Received 4 November 2015; Accepted 4 May 2016

Academic Editor: Luigi Di Sarno

Copyright © 2016 Hisham Qasrawi. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. A. Abrams, Design of Concrete Mixtures, Structural Materials Research Laboratory, Lewis Institute, Chicago, Ill, USA, Bulletin no. 1, 1918.
  2. Road Research Laboratory, “Design of concrete mixes,” Road Note 4, HMSO, London, UK, 1950. View at Google Scholar
  3. B. P. Hughes, “The rational design of high quality concrete mixes,” Concrete, vol. 2, no. 5, pp. 212–222, 1968. View at Google Scholar
  4. B. P. Hughes, “The economic utilization of concrete materials,” in Proceedings of the Symposium on Advances in Concrete, Concrete Society, London, UK, 1971.
  5. G. R. Krishnamurti, “A new economic method of concrete mix design,” Cement and Concrete, vol. 13, no. 2, pp. 160–171, 1972. View at Google Scholar
  6. B. W. Shacklock, Concrete Constituents and Mix Proportions, Cement and Concrete Association, London, UK, 1974.
  7. A. Komar, Building Materials and Components, Mir Publishers, Moscow, Russia, 1974.
  8. D. C. Teychenne, R. E. Franklin, and H. Erntroy, Design of Normal Concrete Mixes, Department of Environment, H.M.S.O., London, UK, 1975.
  9. D. C. Teychenne, J. C. Nicholls, R. E. Franklin, and D. W. Hobbs, Design of Normal Concrete Mixes, Building Research Establishment, Department of Environment, HMSO, London, UK, 1988.
  10. M. El-Rayyes, “A simple method for the design of concrete mixes in the Arabian gulf,” Journal of the University of Kuwait (Science), vol. 9, no. 2, pp. 197–208, 1982. View at Google Scholar
  11. A. F. Abbasi, M. Ahmad, and M. Wasim, “Optimization of concrete mix proportioning using reduced factorial experimental technique,” ACI Materials Journal, vol. 84, no. 1, pp. 55–63, 1987. View at Google Scholar · View at Scopus
  12. N. Krishna Raju, Design of Concrete Mixes, CBS Publishers and Distributers, New Delhi, India, 1993.
  13. ACI Committee 211.1, Standard Practice for Selecting Proportions of Normal, Heavyweight, and Mass Concrete, part 1, ACI Manual of Concrete Practice, 2014.
  14. A. M. Neville, Properties of Concrete, Pitman Publishing Company, London, UK, 3rd edition, 1996.
  15. A. M. Neville and J. J. Brooks, Concrete Technology, Longman, London, UK, 2012.
  16. Kuwaiti Specification Committee, General Specifications for Building and Engineering Works, 1st edition, 1990 (Arabic).
  17. Jordanian Specification Committee, Ministry of Public Works, and Housing, General Specifications for Buildings: Volume 1: Civil and Architectural Works, Ministry of Public Works and Housing, Amman, Jordan, 1st edition, 1985 (Arabic).
  18. Saudi Specification Committee and Ministry of Public Works and Housing Saudi Arabia, General Specifications for Building Execution, 1st edition, 1982 (Arabic).
  19. L. J. Murdock and K. M. Brook, Concrete Materials and Practice, Edward Arnold, London, UK, 1979.
  20. F. M. S. Amin, S. Ahmad, and Z. Wadud, “Effect of ACI concrete mix design parameters on mix proportion and strength,” in Proceedings of the Civil and Environmental Engineering Conference: New Frontiers and Challenges, pp. III-97–III-106, Bangkok, Thailand, November 1999.
  21. Z. Wadud, A. F. M. S. Amin, and S. Ahmad, “Voids in coarse aggregates: an important factor overlooked in the ACI method of normal concrete mix design,” in Proceedings of the International Structural Engineering and Construction Conference (ISEC '01), pp. 423–428, Honolulu, Hawaii, USA, January 2001.
  22. Z. Wadud and S. Ahmad, “ACI method of concrete mix design: a parametric study,” in Proceedings of the Eighth East Asia-Pacific Conference on Structural Engineering and Construction, Paper no. 1408, Nanyang Technological University, Singapore, 2001.
  23. M. C. Nataraja and L. Das, “Concrete mix proportioning as per is 10262:2009—comparison with is 10262:1982 and ACI 211.1-91,” Indian Concrete Journal, vol. 84, no. 9, pp. 64–70, 2010. View at Google Scholar · View at Scopus
  24. S. C. Maiti, R. K. Agarwal, and R. Kumar, “Concrete mix proportioning,” The Indian Concrete Journal, vol. 80, no. 12, pp. 23–26, 2006. View at Google Scholar · View at Scopus
  25. S. Ahmad, “Optimum concrete mixture design using locally available ingredients,” The Arabian Journal for Science and Engineering, vol. 32, no. 1, pp. 27–33, 2007. View at Google Scholar · View at Scopus
  26. A. Erdélyi and S. Fehérvári, “Guide for mix design for concrete,” Report for Civil Engineering, Department of Construction Materials and Engineering Geology Budapest University of Technology and Economics, 2006. View at Google Scholar
  27. ODA, “Designing concrete mixes using local materials,” Tech. Rep. 6990/05A, Overseas Development Administration (ODA), Gifford and Partners, London, UK, 1997. View at Google Scholar
  28. K. Newman, “Properties of concrete,” Structural Concrete, vol. 2, no. 11, pp. 451–482, 1965. View at Google Scholar
  29. F. K. Kong and R. H. Evans, Reinforced and Prestressed Concrete, VNR, London, UK, 1983.
  30. J. D. Dewar, “Relations between various workability control tests for ready mixed concrete,” Tech. Rep. TRA/375, Cement and Concrete Research Association, London, UK, 1964. View at Google Scholar
  31. Y. Abdel-Jawad, Optimal design criteria for concrete mixes in Irbid [M.S. thesis], Yarmouk University, 1984.
  32. J. Ujhelyi, Betonismeretek (Concrete Science), BME Editing House, Budapest, Hungry, 2005.