Advances in Civil Engineering
Volume 2016 (2016), Article ID 5659817, 14 pages
http://dx.doi.org/10.1155/2016/5659817
Research Article
Postheated Model of Confined High Strength Fibrous Concrete
1Civil Engineering Section, Aligarh Muslim University, Aligarh, India
2Department of Civil Engineering, Indian Institute of Technology, Roorkee, India
Received 16 June 2016; Accepted 25 October 2016
Academic Editor: Lucio Nobile
Copyright © 2016 Kaleem A. Zaidi et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Linked References
- D. Cusson and P. Paultre, “High‐strength concrete columns confined by rectangular ties,” Journal of Structural Engineering, vol. 120, no. 3, pp. 783–804, 1994. View at Google Scholar
- B. Li, R. Park, and H. Tanaka, “Strength and ductility of reinforced concrete members and frames constructed using high strength concrete,” Research Report 94-5, University of Canterbury, Christchurch, New Zealand, 1994. View at Google Scholar
- B. D. Scott, R. Park, and M. J. N. Priestley, “Stress-strain behaviour of concrete confined by overlapping hoops at high and low strain rates,” Journal of the American Concrete Institute, vol. 79, no. 1, pp. 13–27, 1982. View at Google Scholar · View at Scopus
- J. B. Mander, M. J. Priestley, and R. Park, “Theoretical stress-strain model for confined concrete,” Journal of Structural Engineering, vol. 114, no. 8, pp. 1804–1826, 1988. View at Publisher · View at Google Scholar · View at Scopus
- S. R. Razvi and M. Saatcioglu, “Strength and deformability of confined high-strength concrete columns,” ACI Structural Journal, vol. 91, no. 6, pp. 678–687, 1994. View at Google Scholar · View at Scopus
- S. A. Sheikh and S. M. Uzumeri, “Strength and ductility of tied concrete columns,” ASCE Journal of Structural Division, vol. 106, no. 5, pp. 1079–1102, 1980. View at Google Scholar · View at Scopus
- B. Campione, S. Mindess, and G. Zingone, “Compressive stress-strain behavior of normal and high-strength carbon-fiber concrete reinforced with steel spirals,” ACI Materials Journal, vol. 96, no. 1, pp. 27–34, 1999. View at Google Scholar · View at Scopus
- S. J. Foster and M. M. Attard, “Strength and ductility of fiber-reinforced high-strength concrete columns,” Journal of Structural Engineering, vol. 127, no. 1, pp. 28–34, 2001. View at Publisher · View at Google Scholar · View at Scopus
- L. S. Hsu and C. T. Hsu, “Stress-strain behavior of steel fiber high strength concrete under compression,” ACI Structural Journal, vol. 91, no. 4, pp. 448–457, 1994. View at Google Scholar
- H. C. Lima Jr., S. M. B. A. Da Silva, and J. S. Giongo, “Steel fibre high strength concrete prisms confined by rectangular ties under concentric compression,” Journal of Materials and Structures, vol. 37, no. 274, pp. 689–697, 2004. View at Publisher · View at Google Scholar
- M. A. Mansur, M. S. Chin, and T. H. Wee, “Stress-strain relationship of confined high-strength plain and fiber concrete,” Journal of Materials in Civil Engineering, vol. 9, no. 4, pp. 171–179, 1997. View at Publisher · View at Google Scholar · View at Scopus
- U. Sharma, P. Bhargava, and S. K. Kaushik, “Comparative study of confinement models for high-strength concrete columns,” Magazine of Concrete Research, vol. 57, no. 4, pp. 185–197, 2005. View at Publisher · View at Google Scholar · View at Scopus
- U. K. Sharma, P. Bhargava, and S. A. Sheikh, “Tie-confined fibre-reinforced high-strength concrete short columns,” Magazine of Concrete Research, vol. 59, no. 10, pp. 757–769, 2007. View at Publisher · View at Google Scholar · View at Scopus
- F.-P. Cheng, V. K. R. Kodur, and T.-C. Wang, “Stress-strain curves for high strength concrete at elevated temperatures,” Journal of Materials in Civil Engineering, vol. 16, no. 1, pp. 84–90, 2004. View at Publisher · View at Google Scholar · View at Scopus
- Y. F. Chang, Y. H. Chen, M. S. Sheu, and G. C. Yao, “Residual stress-strain relationship for concrete after exposure to high temperatures,” Cement and Concrete Research, vol. 36, no. 10, pp. 1999–2005, 2006. View at Publisher · View at Google Scholar · View at Scopus
- L. T. Phan and N. J. Carino, “Review of mechanical properties of HSC at elevated temperature,” Journal of Materials in Civil Engineering, vol. 10, no. 1, pp. 58–64, 1998. View at Publisher · View at Google Scholar · View at Scopus
- U. K. Sharma, K. A. Zaidi, and N. M. Bhandari, “Strength and deformability of heated confined fibrous concrete,” Magazine of Concrete Research, vol. 64, no. 7, pp. 631–646, 2012. View at Publisher · View at Google Scholar · View at Scopus
- K. A. Zaidi, U. K. Sharma, P. Bhargava, and N. M. Bhandari, “Uni-axial behaviour of confined fiber reinforced high strength concrete exposed to elevated temperatures,” in Proceedings of the 6th International Conference on Structures in Fire (SiF '10), pp. 817–825, Michigan State University, June 2010. View at Scopus
- F. Aslani and B. Samali, “Constitutive relationships for steel fibre reinforced concrete at elevated temperatures,” Fire Technology, vol. 50, no. 5, pp. 1249–1268, 2014. View at Publisher · View at Google Scholar · View at Scopus
- C.-G. Han, Y.-S. Hwang, S.-H. Yang, and N. Gowripalan, “Performance of spalling resistance of high performance concrete with polypropylene fiber contents and lateral confinement,” Cement and Concrete Research, vol. 35, no. 9, pp. 1747–1753, 2005. View at Publisher · View at Google Scholar · View at Scopus
- A. Lau and M. Anson, “Effect of high temperatures on high performance steel fibre reinforced concrete,” Cement and Concrete Research, vol. 36, no. 9, pp. 1698–1707, 2006. View at Publisher · View at Google Scholar · View at Scopus
- C. S. Poon, Z. H. Shui, and L. Lam, “Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures,” Cement and Concrete Research, vol. 34, no. 12, pp. 2215–2222, 2004. View at Publisher · View at Google Scholar · View at Scopus
- K. K. Sideris, P. Manita, and E. Chaniotakis, “Performance of thermally damaged fibre reinforced concretes,” Construction and Building Materials, vol. 23, no. 3, pp. 1232–1239, 2009. View at Publisher · View at Google Scholar · View at Scopus
- S. L. Suhaendi and T. Horiguchi, “Effect of short fibers on residual permeability and mechanical properties of hybrid fibre reinforced high strength concrete after heat exposition,” Cement and Concrete Research, vol. 36, no. 9, pp. 1672–1678, 2006. View at Publisher · View at Google Scholar · View at Scopus
- J. Xiao and H. Falkner, “On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures,” Fire Safety Journal, vol. 41, no. 2, pp. 115–122, 2006. View at Publisher · View at Google Scholar · View at Scopus
- U. K. Sharma, K. A. Zaidi, P. Bhargava, and N. M. Bhandari, “Residual strength and deformation characteristics of confined concrete subjected to elevated temperature,” in Proceedings of the 9th U.S. National and 10th Canadian Conference on Earthquake Engineering, pp. 2178–2187, Toronto, Canada, July 2010. View at Scopus
- V. K. R. Kodur and R. McGrath, “Effect of silica fume and lateral confinement on fire endurance of high strength concrete columns,” Canadian Journal of Civil Engineering, vol. 33, no. 1, pp. 93–102, 2006. View at Publisher · View at Google Scholar · View at Scopus
- M. J. Terro and S. A. Hamoush, “Effect of confinement on siliceous aggregate concrete subjected to elevated temperatures and cyclic heating,” ACI Materials Journal, vol. 94, no. 2, pp. 83–89, 1997. View at Google Scholar · View at Scopus
- B. Wu, X. P. Su, H. Li, and J. Yuan, “Effects of high temperature on residual mechanical properties of confined and unconfined high strength concrete,” ACI Material Journal, vol. 99, no. 4, pp. 399–407, 2002. View at Google Scholar
- M. A. Youssef and M. Moftah, “General stress-strain relationship for concrete at elevated temperatures,” Engineering Structures, vol. 29, no. 10, pp. 2618–2634, 2007. View at Publisher · View at Google Scholar · View at Scopus
- S. Popovics, “A numerical approach to the complete stress-strain curve of concrete,” Cement and Concrete Research, vol. 3, no. 5, pp. 583–599, 1973. View at Publisher · View at Google Scholar · View at Scopus
- D. Cusson and P. Paultre, “Stress-strain model for confined high-strength concrete,” Journal of Structural Engineering, vol. 121, no. 3, pp. 468–477, 1995. View at Publisher · View at Google Scholar · View at Scopus
- F. Légeron and P. Paultre, “Uniaxial confinement model for normal- and high-strength concrete columns,” Journal of Structural Engineering, vol. 129, no. 2, pp. 241–252, 2003. View at Publisher · View at Google Scholar
- P. Paultre, R. Eid, Y. Langlois, and Y. Lévesque, “Behavior of Steel Fiber-Reinforced High-Strength Concrete Columns under Uniaxial Compression,” Journal of Structural Engineering, vol. 136, no. 10, pp. 1225–1235, 2010. View at Publisher · View at Google Scholar