Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2016, Article ID 6579434, 11 pages
http://dx.doi.org/10.1155/2016/6579434
Research Article

Finite Element Modeling of Compressive and Splitting Tensile Behavior of Plain Concrete and Steel Fiber Reinforced Concrete Cylinder Specimens

Ahsanullah University of Science and Technology, Dhaka 1208, Bangladesh

Received 17 November 2015; Accepted 21 February 2016

Academic Editor: Hossein Moayedi

Copyright © 2016 Md. Arman Chowdhury et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Graybeal and M. Davis, “Cylinder or cube: strength testing of 80 to 200 MPa (11.6 to 29 ksi) ultra-high-performance fiber-reinforced concrete,” ACI Materials Journal, vol. 105, no. 6, pp. 603–609, 2008. View at Google Scholar · View at Scopus
  2. H. Aoude, W. D. Cook, and D. Mitchell, “Behavior of columns constructed with fibers and self-consolidating concrete,” ACI Structural Journal, vol. 106, no. 3, pp. 349–357, 2009. View at Google Scholar
  3. Z. L. Wang, Z. M. Shi, and J. G. Wang, “On the strength and toughness properties of SFRC under static-dynamic compression,” Composites Part B: Engineering, vol. 42, no. 5, pp. 1285–1290, 2011. View at Publisher · View at Google Scholar · View at Scopus
  4. K. Marar, Ö. Eren, and İ. Yitmena, “Compression specific toughness of normal strength steel fiber reinforced concrete (NSSFRC) and high strength steel fiber reinforced concrete (HSSFRC),” Materials Research, vol. 14, no. 2, pp. 239–247, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. ACI Committee 544, “Design considerations for steel fiber reinforced concrete,” Tech. Rep. ACI 544.4R-88, American Concrete Institute, 1999. View at Google Scholar
  6. T. C. Yet, R. Hamid, and M. Kasmuri, “Dynamic stress-strain behaviour of steel fiber reinforced high-performance concrete with fly ash,” Advances in Civil Engineering, vol. 2012, Article ID 907431, 6 pages, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. ASTM, “Compressive strength of cylindrical concrete specimens,” ASTM C 39/C 39M-05, American Society for Testing and Materials (ASTM) Committee C09, 2006. View at Google Scholar
  8. ASTM C 496/C 496M–04, Splitting Tensile Strength of Cylindrical Concrete Specimens, vol. C09, American Society for Testing and Materials (ASTM) Committee, 2006.
  9. M. M. Islam, Interaction diagrams of square concrete columns confined with fiber reinforced polymer wraps [M. S. thesis Engineering], Bangladesh University of Engineering and Technology, Dhaka, Bangladesh, 2011.
  10. M. K. Uddin, A. Z. Mustafiz, M. A. Chowdhury, and P. Mondal, Investigation of the flexural capacity of beams made of steel fiber reinforced concrete (SFRC) [B.Sc. engineering thesis], Department of Civil Engineering, Ahsanullah University of Science and Technology, Dhaka, Bangladesh, 2013.
  11. J. F. Dola, M. R. Islam, M. S. Khatun, and M. Hussan, Investigation of the shear capacity of beams made of steel fiber reinforced concrete (SFRC) [B.Sc. engineering thesis], Department of Civil Engineering, Ahsanullah University of Science and Technology, Dhaka, Bangladesh, 2013.
  12. ASTM A 820/A 820M-06, Standard Specification for Steel Fibers for Fiber-Reinforced Concrete, vol. A01, American Society for Testing and Materials (ASTM) Committee, 2006.
  13. K. J. Willam and E. D. Warnke, “Constitutive model for the triaxial behavior of concrete,” in Proceedings of the International Association for Bridge and Structural Engineering, vol. 19, pp. 1–30, ISMES, Bergamo, Italy, 1975.
  14. D. I. Kachlakev, T. Miller, S. Yim, K. Chansawat, and T. Potisuk, Finite Element Modeling of Reinforced Concrete Structures Strengthened with FRP Laminates, California Polytechnic State University, San Luis Obispo, Calif, USA; Oregon Department of Transportation, Oregon State University, Corvallis, Ore, USA, 2001.