Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2017 (2017), Article ID 7620187, 8 pages
https://doi.org/10.1155/2017/7620187
Research Article

Prediction of Skid Resistance Value of Glass Fiber-Reinforced Tiling Materials

1Faculty of Engineering, Department of Civil Engineering, Karamanoglu MehmetBey University, Karaman, Turkey
2Faculty of Engineering, Department of Civil Engineering, Manisa Celal Bayar University, Manisa, Turkey
3Faculty of Engineering, Department of Civil Engineering, Kastamonu University, Kastamonu, Turkey

Correspondence should be addressed to Sadik Alper Yildizel; rt.ude.umk@lezidliyas

Received 3 July 2017; Revised 17 October 2017; Accepted 29 October 2017; Published 19 December 2017

Academic Editor: Cumaraswamy Vipulanandan

Copyright © 2017 Sadik Alper Yildizel et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. Karaca, S. Gürcan, M. V. Gökçe, and O. Sivrikaya, “Assessment of the results of the pendulum friction tester (EN 14231) for natural building stones used as floor-coverings,” Construction and Building Materials, vol. 47, pp. 1182–1187, 2013. View at Publisher · View at Google Scholar · View at Scopus
  2. F. Englander, T. J. Hodson, and R. A. Terregrossa, “Economic dimensions of slip and fall injuries,” Journal of Forensic Sciences, vol. 41, no. 5, pp. 733–746, 1996. View at Publisher · View at Google Scholar
  3. M. S. Redfern and B. Bidanda, “Slip resistance of the shoe-floor interface under biomechanically-relevant conditions,” Ergonomics, vol. 37, no. 3, pp. 511–524, 1994. View at Publisher · View at Google Scholar · View at Scopus
  4. A. Ueckermann, D. Wang, M. Oeser, and B. Steinauer, “Calculation of skid resistance from texture measurements,” Journal of Traffic and Transportation Engineering, vol. 2, no. 1, pp. 3–16, 2015. View at Publisher · View at Google Scholar · View at Scopus
  5. X. Y. Mu, L. Li, N. Tang et al., “A laser-based system for highway pavement texture measurement,” November 2003. View at Google Scholar
  6. J. Kebrle and R. Walker, “Texture measurement and friction estimation using laser data acquisition and neural networks,” November 2007. View at Google Scholar
  7. A. Cigada, F. Mancosu, S. Manzoni, and E. Zappa, “Laser triangulation device for in-line measurement of road texture at medium and high speed,” Mechanical Systems and Signal Processing, vol. 24, no. 7, pp. 2225–2234, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. W.C. Spring III and W. L King, Light Depolarization as a Measure of Pavement Surface Texture: Final Report, Naval Surface Weapons Center, Silver Spring, White Oak, MD, USA, 1981.
  9. J. C. Wambold, J. J. Henry, and R. R. Hegmon, “Evaluation of pavement surface texture significance and measurement techniques,” Wear, vol. 83, no. 2, pp. 351–368, 1982. View at Publisher · View at Google Scholar · View at Scopus
  10. H. Zahouani, R. Vargiolu, and M. T. Do, “Characterization of microtexture related to wet road/tire friction,” May 2000. View at Google Scholar
  11. C. Schulze, “Ein geometrisch basiertes modell zur ableitung von reibwerten bei nasse aus der textur,” RWTH Aachen University, Aachen, Germany, 2011, Ph.D. thesis. View at Google Scholar
  12. T. Ustuntas, “Prediction of skid resistance coefficient of cement concrete roads with fuzzy logic,” Civil Eingineering and Environmental Systems, vol. 24, no. 3, pp. 233–246, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. K. A. Grosch, “The relation between the friction and viscoelastic properties of rubber,” Proceedings of the Royal Society of London A, vol. 274, no. 1356, pp. 21–39, 1963. View at Publisher · View at Google Scholar
  14. A. Schallamach, “The load dependence of rubber friction,” Rubber Chemistry and Technology, vol. 26, no. 2, pp. 297–301, 1953. View at Publisher · View at Google Scholar
  15. M. A. Shahin, M. B. Jaksa, and H. R. Maier, “Artificial neural network applications in geotechnical engineering,” Australian Geomechanics, vol. 36, no. 1, pp. 49–62, 2001. View at Google Scholar
  16. S. Haykin and N. Network, Neural Networks: A Comprehensive Foundation, vol. 2, Prentice Hall, Upper Saddle River, NJ, USA, 2004.
  17. J. E. Sierra and M. Santos, “Modelling engineering systems using analytical and neural techniques: hybridization,” Neurocomputing, vol. 271, pp. 70–83, 2017. View at Publisher · View at Google Scholar
  18. X. Yang, A. H. Gandomi, S. Talatahari, and A. H. Alavi, “Artificial neural networks in geotechnical engineering: modeling and application issues, Chapter 10,” S.K. Das, ED., pp. 231–270, Elsevier, London, UK.
  19. S. K. Das and P. K. Basudhar, “Utilization of self-organizing map and fuzzy clustering for site characterization using piezocone data,” Computers and Geotechnics, vol. 36, no. 1-2, pp. 241–248, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. J. Shi, J. A. R. Ortigao, and J. Bai, “Modular neural networks for predicting settlements during tunneling,” Journal of Geotechnical and Environmental Engineering, vol. 124, no. 5, pp. 389–395, 1998. View at Publisher · View at Google Scholar
  21. A. T. Goh, “Seismic liquefaction potential assessed by neural networks,” Journal of Geotechnical Engineering, vol. 120, no. 9, pp. 1467–1480, 1994. View at Publisher · View at Google Scholar · View at Scopus
  22. Z. Guo and R. E. Uhrig, “Use of artificial neural networks to analyze nuclear power plant performance,” Nuclear Technology, vol. 99, no. 1, pp. 36–42, 1992. View at Publisher · View at Google Scholar
  23. P. Purnell and J. Beddows, “Durability and simulated ageing of new matrix glass fibre reinforced concrete,” Cement and Concrete Composites, vol. 27, no. 9-10, pp. 875–884, 2005. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Naqvi, K. Mahmoud, and E. El-Salakawy, “Effect of axial load and steel fibers on the seismic behavior of lap-spliced glass fiber reinforced polymer-reinforced concrete rectangular columns,” Engineering Structures, vol. 134, pp. 376–389, 2017. View at Publisher · View at Google Scholar
  25. T. Simões, H. Costa, D. Dias-da-Costa, and E. Júlio, “Influence of fibres on the mechanical behaviour of fibre reinforced concrete matrixes,” Construction and Building Materials, vol. 137, pp. 548–556, 2017. View at Publisher · View at Google Scholar
  26. M. Mastali, A. Dalvand, and A. R. Sattarifard, “The impact resistance and mechanical properties of reinforced self-compacting concrete with recycled glass fibre reinforced polymers,” Journal of Cleaner Production, vol. 124, pp. 312–324, 2016. View at Publisher · View at Google Scholar · View at Scopus
  27. S. T. Tassew and A. S. Lubell, “Mechanical properties of glass fiber reinforced ceramic concrete,” Construction and Building Materials, vol. 51, pp. 215–224, 2014. View at Publisher · View at Google Scholar · View at Scopus
  28. M. A. Shahin, H. R. Maier, and M. B. Jaksa, “Data division for developing neural networks applied to geotechnical engineering,” Journal of Computing in Civil Engineering, vol. 18, no. 2, pp. 105–114, 2004. View at Publisher · View at Google Scholar · View at Scopus
  29. S. K. Das and P. K. Basudhar, “Undrained lateral load capacity of piles in clay using artificial neural network,” Computers and Geotechnics, vol. 33, no. 8, pp. 454–459, 2006. View at Publisher · View at Google Scholar · View at Scopus
  30. M. A. Shahin, “Intelligent computing for modeling axial capacity of pile foundations,” Canadian Geotechnical Journal, vol. 47, no. 2, pp. 230–243, 2010. View at Publisher · View at Google Scholar · View at Scopus
  31. A. Kanibir, R. Ulusay, and O. Aydan, Liquefaction-Induced Ground Deformations on a Lake Shore (Turkey) and Empirical Equations for their Prediction, IAEG, 2006, Paper 362.
  32. T. P. Thaker and K. S. Rao, Development of Statistical Correlations between Shear Wave Velocity and Penetration Resistance using MASW Technique, Pan-American CGS Geotechnical Conference, ON, Canada, 2011.