Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2017, Article ID 8205081, 11 pages
https://doi.org/10.1155/2017/8205081
Research Article

Bond Effects between Concrete and Steel Bar Using Different Diameter Bars and Different Initial Crack Width

1School of Transportation Science and Engineering, Beihang University, Beijing 100191, China
2State Laboratory of Subtropical Building Science, South China University of Technology, Guangzhou 510640, China

Correspondence should be addressed to Papa Niane Faye; moc.liamtoh@eyafrukahs

Received 4 February 2017; Accepted 16 March 2017; Published 2 April 2017

Academic Editor: Peng Zhang

Copyright © 2017 Papa Niane Faye et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. W. Xue, L. Zhang, Y. Xiong, J. Chen, and W. Jin, “Accelerating tests for the performance deterioration of concrete exposed to chloride media,” Procedia Engineering, vol. 27, pp. 1635–1643, 2012. View at Google Scholar
  2. C. Q. Li and R. E. Melchers, “Time-dependent risk assessment of structural deterioration caused by reinforcement corrosion,” ACI Structural Journal, vol. 102, no. 5, pp. 754–762, 2005. View at Google Scholar · View at Scopus
  3. L. Basheer, J. Kropp, and D. J. Cleland, “Assessment of the durability of concrete from its permeation properties: a review,” Construction and Building Materials, vol. 15, no. 2-3, pp. 93–103, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. M. Chemrouk and T. Tahenni, “Étude des flèches et des ouvertures de fissures des poutres en béton arme contenant des fibres d'acier,” in Proceedings of the 1st International Conference on Sustainable Built Environment Infrastructures in Developing Countries ENSET (SBEIDCO '09), p. 1, Oran, Algeria, 2009.
  5. G. Malumbela, P. Moyo, and M. Alexander, “Behaviour of RC beams corroded under sustained service loads,” Construction and Building Materials, vol. 23, no. 11, pp. 3346–3351, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. Z. Z. Rijal, A. B. Abd Rahman, R. N. Mohamed, I. S. Ibrahim, and S. Z. Sooria, “Comparison of bond stresses of deformed steel bars embedded in two different concrete mixes,” in Proceedings of the 9th Asia Pacific Structural Engineering & Construction Conference (APSEC '15) and 8th Asean Civil Engineering Conference (ACEC '15), pp. 131–136, Kuala Lumpur, Malaysia, November 2015.
  7. X. He and D. Peng, “Experimental study on crack resistance property of fresh polypropylene fiber concrete,” in Proceedings of the International Conference on Multimedia Technology (ICMT '11), pp. 1064–1069, IEEE, Hangzhou, China, July 2011. View at Publisher · View at Google Scholar
  8. C. Q. Li, “Initiation of chloride-induced reinforcement corrosion in concrete structural members—experimentation,” ACI Structural Journal, vol. 98, no. 4, pp. 502–510, 2001. View at Google Scholar · View at Scopus
  9. C. Q. Li, “Initiation of chloride-induced reinforcement corrosion in concrete structural members—prediction,” ACI Structural Journal, vol. 99, no. 2, pp. 133–141, 2002. View at Google Scholar · View at Scopus
  10. C. Q. Li and R. E. Melchers, “Time-dependent reliability analysis of corrosion-induced concrete cracking,” ACI Structural Journal, vol. 102, no. 4, pp. 543–549, 2005. View at Google Scholar · View at Scopus
  11. Z. X. Chen Jinping, The Study on the Durability of the Concrete Structure, IEEE, Piscataway, NJ, USA, 2010.
  12. L. Schueremans, D. Van Gemert, and S. Giessler, “Chloride penetration in RC-structures in marine environment—long term assessment of a preventive hydrophobic treatment,” Construction and Building Materials, vol. 21, no. 6, pp. 1238–1249, 2007. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Pommersheim and J. Clifton, “Prediction of concrete service-life,” Materials and Structures, vol. 18, no. 1, pp. 21–30, 1985. View at Publisher · View at Google Scholar · View at Scopus
  14. N. Verma and A. K. Misra, “Bond characteristics of reinforced TMT bars in self compacting concrete and normal cement concrete,” Alexandria Engineering Journal, vol. 54, no. 4, pp. 1155–1159, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. F. M. De Almeida Filho and A. L. H. D. C. El Debs, “Numerical approach of the bond stress behavior of steel bars embedded in self-compacting concrete (SCC) and in ordinary concrete in pullout models,” Science and Engineering Journal, vol. 23, no. 2, pp. 57–66, 2014. View at Google Scholar · View at Scopus
  16. M. R. Kabir and M. M. Islam, “Bond stress behavior between concrete and steel rebar: critical investigation of pull-out test via Finite Element Modeling,” International Journal of Civil And Structural Engineering, vol. 5, no. 1, pp. 80–90, 2014. View at Google Scholar
  17. M. N. S. Hadi, “Bond of high strength concrete with high strength reinforcing steel,” Magazine of Concrete Research, vol. 56, no. 9, pp. 545–557, 2004. View at Publisher · View at Google Scholar
  18. F. Yan, Z. Lin, and M. Yang, “Bond mechanism and bond strength of GFRP bars to concrete: a review,” Composites Part B: Engineering, vol. 98, pp. 56–69, 2016. View at Publisher · View at Google Scholar · View at Scopus
  19. A. M. Diab, H. E. Elyamany, M. A. Hussein, and H. M. Al Ashy, “Bond behavior and assessment of design ultimate bond stress of normal and high strength concrete,” Alexandria Engineering Journal, vol. 53, no. 2, pp. 355–371, 2014. View at Publisher · View at Google Scholar · View at Scopus
  20. X. Fu and D. D. L. Chung, “Improving the bond strength between steel rebar and concrete by ozone treatment of rebar and polymer addition to concrete,” Cement and Concrete Research, vol. 27, no. 5, pp. 643–648, 1997. View at Publisher · View at Google Scholar · View at Scopus
  21. A. Foroughi-Asl, S. Dilmaghani, and H. Famili, “Bond strength of reinforcement steel in self-compacting concrete,” International Journal of Civil Engineerng, vol. 6, no. 1, pp. 24–33, 2008. View at Google Scholar
  22. Y. Shi and X. Li, “Analysis of ductility of composite steel-concrete structure based on computer simulation technology,” in Proceedings of the 7th International Conference on Measuring Technology and Mechatronics Automation (ICMTMA '15), pp. 141–144, June 2015. View at Publisher · View at Google Scholar · View at Scopus
  23. L. Marsavina, K. Audenaert, G. De Schutter, N. Faur, and D. Marsavina, “Experimental and numerical determination of the chloride penetration in cracked concrete,” Construction and Building Materials, vol. 23, no. 1, pp. 264–274, 2009. View at Publisher · View at Google Scholar · View at Scopus