Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 1096282, 9 pages
https://doi.org/10.1155/2018/1096282
Research Article

Modeling of Corrosion Rate and Resistivity of Steel Reinforcement of Calcium Aluminate Cement Mortar

1Civil Engineering School, Polytechnic University of Madrid, C/ Profesor Aranguren, s/n, Ciudad Universitaria, 28040 Madrid, Spain
2Spanish Institute of Cement and Its Applications (IECA), C/ José Abascal 53, 28003 Madrid, Spain
3Centro de Investigación y de Estudios Avanzados del IPN, Unidad Mérida, km 6 Antigua Carretera a Progreso, 97310 Mérida, YUC, Mexico
4I.E.S. “Enrique Tierno Galván”, C/ Camino de los Frailes, s/n, Leganés, 28911 Madrid, Spain

Correspondence should be addressed to Miguel Ángel Sanjuán; se.acei@naujnasam

Received 3 August 2017; Accepted 26 December 2017; Published 5 March 2018

Academic Editor: Constantin Chalioris

Copyright © 2018 Cristina Argiz et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Neville, “History of high-alumina cement. Part 1: problems and the stone report,” Proceedings of the Institution of Civil Engineers Engineering History and Heritage, vol. 162, no. 2, pp. 81–91, 2009. View at Publisher · View at Google Scholar
  2. A. Neville, “History of high-alumina cement. Part 2: background to issues,” Proceedings of the Institution of Civil Engineers Engineering History and Heritage, vol. 162, no. 2, pp. 93–101, 2009. View at Publisher · View at Google Scholar
  3. C. L. Page, N. R. Short, and W. R. Holden, “The influence of different cements on chloride induced corrosion of reinforcing steel,” Cement and Concrete Research, vol. 16, no. 1, pp. 79–86, 1986. View at Publisher · View at Google Scholar · View at Scopus
  4. C. Arya, N. R. Buenfeld, and J. B. Newman, “Assessment of simple methods of determining the free chloride content of cement paste,” Cement and Concrete Research, vol. 17, no. 6, pp. 907–918, 1987. View at Publisher · View at Google Scholar · View at Scopus
  5. H. G. Midgley and A. Midgley, “The conversion of high alumina cement,” Magazine of Concrete Research, vol. 27, no. 91, pp. 59–77, 1975. View at Publisher · View at Google Scholar · View at Scopus
  6. S. Goñi, M. T. Gaztañaga, J. L. Sagrera, and M. S. Hernandez, “The influence of NaCl on the reactivity of high alumina cement in water: pore solution and solid phase characterization,” Journal of Material Research, vol. 9, no. 7, pp. 1533–1539, 1994. View at Publisher · View at Google Scholar · View at Scopus
  7. K. Y. Ann, T.-S. Kim, J. H. Kim, and S.-H. Kim, “The resistance of high alumina cement against corrosion of steel in concrete,” Construction and Building Materials, vol. 24, no. 8, pp. 1502–1510, 2010. View at Publisher · View at Google Scholar · View at Scopus
  8. R. C. Ivanov, C. Angulski da Luz, H. E. Zorel Jr., and J. I. Pereira Filho, “Behavior of calcium aluminate cement (CAC) in the presence of hexavalent chromium,” Cement and Concrete Composites, vol. 73, pp. 114–122, 2016. View at Publisher · View at Google Scholar · View at Scopus
  9. S. M. Park, J. G. Jang, H. M. Son, and H. K. Lee, “Stable conversion of metastable hydrates in calcium aluminate cement by early carbonation curing,” Journal of CO2 Utilization, vol. 21, pp. 224–226, 2017. View at Publisher · View at Google Scholar · View at Scopus
  10. M. A. Sanjuán, “Formation of chloroaluminates in calcium aluminate cements cured at high temperatures and exposed to chloride solutions,” Journal of Material Science, vol. 32, no. 23, pp. 6207–6213, 1997. View at Publisher · View at Google Scholar
  11. G. Falzone, M. Balonis, and G. Sant, “X-AFm stabilization as a mechanism of bypassing conversion phenomena in calcium aluminate cements,” Cement and Concrete Research, vol. 72, pp. 54–68, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Macías, A. Kindness, and F. P. Glasser, “Corrosion behaviour of steel in high alumina cement mortar cured at 5°, 25° and 55°C: chemical and physical factors,” Journal of Material Science, vol. 91, no. 9, pp. 2279–2289, 1996. View at Publisher · View at Google Scholar
  13. S. Goñi, C. Andrade, and C. L. Page, “Corrosion behaviour of steel in high alumina cement mortar samples: effect of chloride,” Cement and Concrete Research, vol. 21, no. 4, pp. 635–646, 1991. View at Publisher · View at Google Scholar · View at Scopus
  14. S. H. Jin, H. J. Yang, J. P. Hwang, and K. Y. Ann, “Corrosion behaviour of steel in CAC-mixed concrete containing different concentrations of chloride,” Construction and Building Materials, vol. 110, pp. 227–234, 2016. View at Publisher · View at Google Scholar · View at Scopus
  15. G. Li, A. Zhang, Z. Song, C. Shi, Y. Wang, and J. Zhang, “Study on the resistance to seawater corrosion of the cementitious systems containing ordinary Portland cement or/and calcium aluminate cement,” Construction and Building Materials, vol. 157, pp. 852–859, 2017. View at Publisher · View at Google Scholar · View at Scopus
  16. L. G. Andión, P. Garcés, F. Cases, C. G. Andreu, and J. L. Vazquez, “Metallic corrosion of steels embedded in calcium aluminate cement mortars,” Cement and Concrete Research, vol. 31, no. 9, pp. 1263–1269, 2001. View at Publisher · View at Google Scholar · View at Scopus
  17. M. A. Sanjuán, “Effect of curing temperature on corrosion of steel bars embedded in calcium aluminate mortars exposed to chloride solutions,” Corrosion Science, vol. 41, no. 2, pp. 335–350, 1999. View at Publisher · View at Google Scholar · View at Scopus
  18. G. E. P. Box, W. G. Hunter, and J. S. Hunter, Statitics for Experimenters, John Wiley & Sons, New York, NY, USA, 1978.
  19. C. Argiz and M. A. Sanjuán, “Full factorial design to assess the concrete gas permeability,” Afinidad, vol. 72, pp. 169–175, 2017, http://www.raco.cat/index.php/afinidad/article/download/.../419068. View at Google Scholar
  20. M. A. Sanjuán and C. Argiz, “Coal fly ash alkalis content characterization by means of a full factorial design,” Materials Letters, vol. 164, pp. 528–531, 2016. View at Publisher · View at Google Scholar · View at Scopus
  21. H. F. W. Taylor, Cement Chemistry, Academic Press, New York, NY, USA, 1992.