Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 1949324, 6 pages
https://doi.org/10.1155/2018/1949324
Research Article

The Unified Strength Theory for Plastic Limit Load Analysis of Vertical Shaft Lining

1State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou 221116, China
2School of Mechanics and Civil Engineering, China University of Mining and Technology, Xuzhou 221116, China

Correspondence should be addressed to Guangsi Zhao; moc.621@tmucsgz

Received 16 September 2017; Accepted 11 February 2018; Published 12 April 2018

Academic Editor: Luigi Di Sarno

Copyright © 2018 Guangsi Zhao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. G. Spagnoli, P. Oreste, and L. L. Bianco, “New equations for estimating radial loads on deep shaft linings in weak rocks,” International Journal of Geomechanics, vol. 16, no. 6, pp. 1–5, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. S. E. H. M. Hons, S. O. C. M. Hons, A. Auld, S. Yorkshire, and U. Kingdom, “The design of shaft linings to resist time dependent deformation in evaporite rocks,” in Proceedings of the International Conference on Shaft Design and Construction, Londres, UK, April 2012.
  3. Z.-S. Yao, H. Chang, and C. X. Rong, “Research on stress and strength of high strength reinforced concrete drilling shaft lining in thick top soils,” Journal of China University of Mining and Technology, vol. 17, no. 3, pp. 432–435, 2007. View at Publisher · View at Google Scholar · View at Scopus
  4. L. Liao, A. de la Fuente, S. Cavalaro, and A. Aguado, “Design procedure and experimental study on fibre reinforced concrete segmental rings for vertical shafts,” Materials and Design, vol. 92, pp. 590–601, 2016. View at Publisher · View at Google Scholar · View at Scopus
  5. G. Walton and M. S. Diederichs, “A mine shaft case study on the accurate prediction of yield and displacements in stressed ground using lab-derived material properties,” Tunnelling and Underground Space Technology, vol. 49, pp. 98–113, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. Q. Zhao, Q. Gao, Z.-P. Zhang, and W.-G. Xiao, “Deformation analysis and stability evaluation of the main shaft at Jinchuan Mine No. 3,” Journal of China University of Mining and Technology, vol. 17, no. 2, pp. 290–294, 2007. View at Publisher · View at Google Scholar · View at Scopus
  7. V. F. Skvortsov, A. O. Boznak, A. B. Kim, A. Y. Arlyapov, and A. I. Dmitriev, “Reduction of the residual stresses in cold expanded thick-walled cylinders by plastic compression,” Defence Technology, vol. 12, no. 6, pp. 473–479, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. M. H. Yu, V. A. Kolupaev, Y. M. Li, and J. C. Li, “Advances in unified strength theory and its generalization,” Procedia Engineering, vol. 10, pp. 2508–2513, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Yu, “Advances in strength theories for materials under complex stress state in the 20th century,” Applied Mechanics Reviews, vol. 55, no. 3, p. 169, 2002. View at Publisher · View at Google Scholar · View at Scopus