Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 3251523, 10 pages
https://doi.org/10.1155/2018/3251523
Research Article

Development of Composite for Thermal Barriers Reinforced by Ceramic Fibers

Faculty of Civil Engineering, Czech Technical University in Prague, Thakurova 7, 166 90 Prague 6, Czech Republic

Correspondence should be addressed to Pavel Reiterman; zc.tuvc.vsf@namretier.levap

Received 28 December 2017; Accepted 14 February 2018; Published 20 March 2018

Academic Editor: Peng Zhang

Copyright © 2018 Ondřej Holčapek et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. K. J. Burton, N. A. Brownlee, A. Mahar, E. N. Pavlisko, T. A. Sporn, and V. L. Roggli, “Diffuse malignant mesothelioma and synchronous lung cancer: a clinicopathological study of 18 cases,” Lung Cancer, vol. 95, pp. 1–7, 2016. View at Publisher · View at Google Scholar · View at Scopus
  2. R. F. Dodson, M. A. L. Atkinson, and J. L. Levin, “Asbestos fiber length as related to potential pathogenicity: a critical review,” American Journal of Industrial Medicine, vol. 44, no. 3, pp. 291–297, 2003. View at Publisher · View at Google Scholar · View at Scopus
  3. C. Mensi, L. Riboldi, S. Matteis, A. Bertazzi, and D. Consonni, “Impact of an asbestos cement factory on mesothelioma incidence: global assessment of effects of occupational, familial, and environmental exposure,” Environment International, vol. 74, pp. 191–199, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. L. Stayner, L. S. Welch, and R. Lemen, “The world pandemic of asbestos-related diseases,” Annual Review of Public Health, vol. 34, no. 1, pp. 205–216, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. I. D. Kashcheev, K. G. Zemlyanoi, S. A. Podkopaev, E. V. Korsukov, L. A. Karpets, and I. V. Kormina, “Use of carbon fibers in refractory materials,” Refractories and Industrial Ceramics, vol. 50, no. 5, pp. 335–339, 2009. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Hambach, H. Möhller, T. Neumann, and D. Volkmer, “Carbon fibre reinforced cement-based composites as smart floor heating materials,” Composites Part B: Engineering, vol. 90, pp. 465–470, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. D. A. S. Rambo, F. A. Silva, R. D. T. Filho, N. Ukrainczyk, and E. Koenders, “Tensile strength of a calcium-aluminate cementitious composite reinforced with basalt textile in a high-temperature environment,” Cement and Concrete Composites, vol. 70, pp. 183–193, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Colombo, L. Vergani, and M. Burman, “Static and fatigue characterization of new basalt fibre reinforced composites,” Composites Structures, vol. 94, no. 3, pp. 1165–1174, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. S. S. Lam, B. Bu, Q. Liu, and I. F.-Y. Ho, “Monotonic and cyclic behavior of high-strength concrete with polypropylene fibers at high temperature,” ACI Materials Journal, vol. 109, no. 3, pp. 323–330, 2012. View at Publisher · View at Google Scholar
  10. V. K. R. Kodur, F. P. Cheng, T. C. Wang, and M. A. Sultan, “Effect of strength and fiber reinforcement on fire resistance of high-strength concrete columns,” Journal of Structural Engineering, vol. 129, no. 2, pp. 253–259, 2003. View at Publisher · View at Google Scholar · View at Scopus
  11. P. Kalifa, G. Chéné, and C. Gallé, “High-temperature behaviour of HPC with polypropylene fibres from spalling to microstructure,” Cement and Concrete Research, vol. 31, no. 10, pp. 1487–1499, 2001. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Lau and M. Anson, “Effect of high temperatures on high performance steel fibre reinforced concrete,” Cement and Concrete Research, vol. 36, no. 9, pp. 1698–1707, 2006. View at Publisher · View at Google Scholar · View at Scopus
  13. F. Ali and D. O’Connor, “Structural performance of rotationally restrained steel columns in fire,” Fire Safety Journal, vol. 36, no. 7, pp. 679–691, 2001. View at Publisher · View at Google Scholar · View at Scopus
  14. O. Holčapek, “Resistance of refractory cement composite to cyclic temperature loading,” Key Engineering Materials, vol. 677, pp. 23–28, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. R. Montgomery, Heat-Resisting and Refractory Concretes: Advanced Concrete Technology Set, 2003.
  16. P. Reiterman, O. Holčapek, M. Jogl, and P. Konvalinka, “Physical and mechanical properties of composites made with aluminous cement and basalt fibers developed for high temperature application,” Advances in Materials Science and Engineering, vol. 2015, Article ID 703029, 10 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. O. Holčapek, P. Reiterman, and P. Konvalinka, “Fracture characteristics of refractory composites containing metakaolin and ceramic fibers,” Advances in Mechanical Engineering, vol. 7, no. 3, pp. 1–13, 2015. View at Publisher · View at Google Scholar · View at Scopus
  18. S. Ribeiro and J. A. Rodrigues, “The influence of microstructure on the maximum load and fracture energy of refractory castables,” Ceramics International, vol. 36, no. 1, pp. 263–274, 2010. View at Publisher · View at Google Scholar · View at Scopus
  19. E. K. Tschegg, K. T. Fendt, C. H. Manhart, and H. Harmuth, “Uniaxial and biaxial fracture behaviour of refractory materials,” Engineering Fracture Mechanics, vol. 76, no. 14, pp. 2249–2259, 2009. View at Publisher · View at Google Scholar · View at Scopus
  20. D. Y. Miyaji, T. Tonnesen, and J. A. Rodrigues, “Fracture energy and thermal shock damage resistance of refractory castables containing eutectic aggregates,” Ceramics International, vol. 40, no. 9, pp. 15227–15239, 2014. View at Publisher · View at Google Scholar · View at Scopus
  21. T. Vieira, A. Alves, J. De Brito, J. R. Correia, and R. V. Silva, “Durability-related performance of concrete containing fine recycled aggregates from crushed bricks and sanitary ware,” Materials and Design, vol. 90, pp. 767–776, 2016. View at Publisher · View at Google Scholar · View at Scopus
  22. R. Hela, M. Tazky, and L. Bodnarova, “Possibilities of determination of optimal dosage of power plant fly ash for concrete,” Jurnal Teknologi, vol. 78, pp. 59–64, 2016. View at Publisher · View at Google Scholar · View at Scopus
  23. O. Holčapek, “Bond characteristics of TRC slabs cured in autoclave,” Key Engineering Materials, vol. 722, pp. 305–310, 2017. View at Publisher · View at Google Scholar · View at Scopus
  24. A. K. Singh, V. Dey, and R. N. Rai, “Study of the effect of high-temperature ceramic fiber insulating board to weld Rai grade P-91 steel,” Journal of Manufacturing Processes, vol. 25, pp. 1–7, 2017. View at Publisher · View at Google Scholar · View at Scopus
  25. A. R. Bunsell and M. H. Berger, “Fine diameter ceramic fibres,” Journal of European Ceramic Society, vol. 20, no. 13, pp. 2249–2260, 2000. View at Publisher · View at Google Scholar · View at Scopus
  26. H. Su and J. Xu, “Dynamic compressive behavior of ceramic fiber reinforced concrete under impact load,” Construction and Building Materials, vol. 45, pp. 306–313, 2013. View at Publisher · View at Google Scholar
  27. D. A. S. Rambo, F. A. Silva, R. D. T. Filho, and O. F. M. Gomes, “Effect of elevated temperatures on the mechanical behaviour of basalt textile reinforced refractory concrete,” Materials and Design, vol. 65, pp. 24–33, 2015. View at Publisher · View at Google Scholar · View at Scopus
  28. C. M. George, in Structure and Performance of Cements, Applied Science Publishers, London, UK, 1983.
  29. V. Antonovič, J. Keriene, R. Boris, and M. Aleknevičius, “The effect of temperature on the formation of the hydrated calcium aluminate cement structure,” Procedia Engineering, vol. 57, pp. 99–106, 2013. View at Publisher · View at Google Scholar · View at Scopus
  30. D. M. Kannan, S. H. Aboubakr, A. S. EL-Dieb, and M. M. Reda Taha, “High performance concrete incorporating ceramic waste powder as large partial replacement of Portland cement,” Construction and Building Materials, vol. 144, pp. 35–41, 2017. View at Publisher · View at Google Scholar · View at Scopus
  31. M. Drdácký, F. Fratini, D. Frankeová, and Z. Slížková, “The Roman mortars used in the construction of the Ponte di Augusto (Narni, Italy)–a comprehensive assessment,” Construction and Building Materials, vol. 38, pp. 1117–1128, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. G. Baronio and L. Binda, “Study of the pozzolanity of some bricks and clays,” Construction and Building Materials, vol. 11, no. 1, pp. 41–46, 1997. View at Publisher · View at Google Scholar
  33. S. Subasi, H. Öztürk, and M. Emiroglu, “Utilizing of waste ceramic powder as filler materials in self-consolidating concrete,” Construction and Building Materials, vol. 149, pp. 567–574, 2017. View at Publisher · View at Google Scholar · View at Scopus
  34. O. Holčapek, P. Reiterman, and P. Konvalinka, “Cyclic temperature loading: residual flexural strength of refractory slabs,” Acta Polytechnica, vol. 57, no. 2, pp. 97–104, 2017. View at Publisher · View at Google Scholar · View at Scopus
  35. W. A. Tasong, C. J. Lynsdale, and J. C. Cripps, “Aggregate-cement paste interface. ii: influence of aggregate physical properties,” Cement and Concrete Research, vol. 28, no. 10, pp. 1453–1465, 1998. View at Publisher · View at Google Scholar
  36. T. Özturan and C. Çeçen, “Effect of coarse aggregate type on mechanical properties of concretes with different strengths,” Cement and Concrete Research, vol. 27, no. 2, pp. 165–170, 1997. View at Publisher · View at Google Scholar
  37. A. M. Neville, Properties of Concrete, Longman, New York, NY, USA, 4th edition, 2000.
  38. Z. P. Bažant and M. F. Kaplan, Concrete at High Temperatures, Longman, London, UK, 1st edition, 1996.
  39. V. Kodur and W. Khaliq, “Effect of temperature on thermal properties of different types of high-strength concrete,” Journal of Materials in Civil Engineering, vol. 23, no. 6, pp. 793–801, 2011. View at Publisher · View at Google Scholar · View at Scopus
  40. P. Ogrodnik, B. Zegardlo, and M. Szelag, “The use of heat-resistant concrete made with ceramic sanitary ware waste for thermal energy storage,” Applied Sciences, vol. 7, no. 12, p. 1303, 2017. View at Publisher · View at Google Scholar · View at Scopus
  41. M. Jogl, P. Reiterman, O. Holčapek, and J. Kot’átková, “Influence of high-temperature on polycarboxylate superplasticizer in aluminous cement based fibre composites,” Advanced Materials Research, vol. 982, pp. 125–129, 2014. View at Publisher · View at Google Scholar · View at Scopus
  42. CSN EN 1015–3, Methods of Test for Mortar for Masonry: Determination of Consistence of Fresh Mortar, 1999.
  43. CSN EN 196-1, Methods of Testing Cement–Part 1: Determination of Strength, 2016.
  44. RILEM, “Determination of the fracture energy of mortars and concrete by means of three-point bend test on notched beams,” Materials and Structures, vol. 18, no. 106, pp. 285–290, 1985. View at Google Scholar
  45. D. N. Boccaccini, M. Romagnoli, E. Kamseu, P. Veronesi, C. Leonelli, and G. C. Pellacani, “Determination of thermal shock resistance in refractory materials by ultrasonic pulse velocity measurement,” Journal of the European Ceramic Society, vol. 27, no. 2-3, pp. 1859–1863, 2007. View at Publisher · View at Google Scholar · View at Scopus
  46. M. Posarac, M. Dimitrijevic, T. Volkov-Husovic, J. Majstrovic, and B. Matovic, “The ultrasonic and image analysis method for non-destructive quantification of the thermal shock damage in refractory specimens,” Materials and Design, vol. 30, no. 8, pp. 3338–3343, 2009. View at Publisher · View at Google Scholar · View at Scopus
  47. CSN EN 73 1371, Non-Destructive Testing of Concrete–Ultrasonic Pulse Method of Concrete Testing, 2011.
  48. O. Holčapek, P. Reiterman, M. Jog, and P. Konvalinka, “Destructive and non-destructive testing of high temperature influence on refractory fiber composite,” Advanced Materials Research, vol. 982, pp. 145–148, 2014. View at Publisher · View at Google Scholar · View at Scopus
  49. M. G. Kakroudi, E. Yeugo-Fogaing, C. Gault, M. Huger, and T. Chotard, “Effect of thermal treatment on damage mechanical behaviour of refractory castables: comparison between bauxite and andalusite aggregate,” Journal of the European Ceramic Society, vol. 28, no. 13, pp. 2471–2478, 2008. View at Publisher · View at Google Scholar · View at Scopus