Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018 (2018), Article ID 3506892, 11 pages
https://doi.org/10.1155/2018/3506892
Research Article

Access Control Points: Reducing a Possible Blast Impact by Meandering

European Commission, Joint Research Centre, Ispra, Italy

Correspondence should be addressed to Martin Larcher

Received 24 August 2017; Accepted 7 December 2017; Published 11 February 2018

Academic Editor: Filipe Santos

Copyright © 2018 Martin Larcher et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. M. Lewis, “State of the art report on European legislation relating to explosives and explosive detection system for non-aviation configurations,” Joint Research Centre, Ispra, Italy, 2013, Tech. Rep. JRC84076. View at Google Scholar
  2. B. M. Luccioni, R. D. Ambrosini, and R. F. Danesi, “Analysis of building collapse under blast loads,” Engineering Structures, vol. 26, no. 1, pp. 63–71, 2004. View at Publisher · View at Google Scholar · View at Scopus
  3. M. Larcher, M. Arrigoni, C. Bedon et al., “Design of blast-loaded glazing windows and facades: a review of essential requirements towards standardization,” Advances in Civil Engineering, vol. 2016, Article ID 2604232, 14 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  4. R. Hajek and M. Foglar, “Numerical and experimental analysis of the effect of rigid barriers on blast wave propagation,” Journal of Structural Engineering, vol. 141, no. 12, p. 04015061, 2015. View at Google Scholar
  5. C. N. Kingery and G. Bulmash, “Airblast parameters from TNT spherical air burst and hemispherical surface burst,” Defence Technical Information Center, Ballistic Research Laboratory, Aberdeen Proving Ground, MD, USA, 1984, Tech. Rep. ARBRL-TR-02555. View at Google Scholar
  6. M. Larcher, “Pressure-time functions for the description of air blast waves,” 2008, Tech. Rep. JRC46829, Joint Research Centre, Ispra, Italy. View at Google Scholar
  7. V. Karlos and G. Solomos, “Calculation of blast loads for application to structural components,” Tech. Rep. EUR 26456EN, Joint Research Centre, Publications Office of the European Union, Luxembourg, 2013.
  8. V. Karlos, G. Solomos, and M. Larcher, “Analysis of the blast wave decay coefficient using the Kingery-Bulmash data,” International Journal of Protective Structures, vol. 7, no. 3, pp. 409–429, 2016. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Larcher, “Development of discrete cracks in concrete loaded by shock waves,” International Journal for Impact Engineering, vol. 36, pp. 700–710, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Li and H. Hao, “Internal and external pressure prediction of vented gas explosion in large rooms by using analytical and CFD methods,” Journal of Loss Prevention in the Process Industries, vol. 49, pp. 367–381, 2017. View at Publisher · View at Google Scholar
  11. EN14494, “Gas explosion venting protective systems,” 2007. View at Google Scholar
  12. M. Larcher, F. Casadei, and G. Solomos, “Influence of venting areas on the air blast pressure inside tubular structures like railway carriages,” Journal of Hazardous Materials, vol. 183, no. 1-3, pp. 839–846, 2010. View at Publisher · View at Google Scholar · View at Scopus
  13. P. J. Miller, “A reactive flow model with coupled reaction kinetics for detonation and combustion in non-ideal explosives,” MRS Proceedings, vol. 418, 1995. View at Publisher · View at Google Scholar
  14. M. Larcher, R. Forsberg, U. Bjoernstig, A. Holgersson, and G. Solomos, “Effectiveness of finite element modelling of damage and injuries for explosions inside trains,” Journal of Transportation Safety and Security, vol. 8, pp. 83–100, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. G. Valsamos, F. Casadei, M. Larcher, and G. Solomos, “Implementation of flying debris fatal risk calculation in EUROPLEXUS,” Tech. Rep. JRC94805, Joint Research Centre, Publications Office of the European Union, Luxembourg, 2015.
  16. E. González Ferradás, F. Díaz Alonso, M. Doval Miñarro, A. Miñana Aznar, J. Ruiz Gimeno, and J. Sánchez Pérez, “Consequence analysis by means of characteristic curves to determine the damage to humans from bursting spherical vessels,” Process Safety and Environmental Protection, vol. 86, no. 2, pp. 121–129, 2008. View at Publisher · View at Google Scholar · View at Scopus
  17. S. Mannan, Lees’ Loss Prevention in the Process Industries: Hazard Identification, Assessment and Control, vol. 2, Elsevier, Amsterdam, 2005.
  18. Department of Defence USA, Unified Facilities Criteria, UFC 3-340–2, 2008.
  19. “NATO. STANAG 2280: design threat levels and handover procedure for temporary protective structures,” 2008.
  20. G. F. Kinney and K. J. Graham, Explosive Shocks in Air, Springer, Berlin, Germany, 1985.
  21. D. Bogosian, J. Ferritto, and Y. Shi, “Measuring uncertainty and conservatism in simplified blast models,” in Proceedings of 30th Explosive Safety Seminar, Atlanta, Georgia, August 2002.
  22. M. Larcher and F. Casadei, “Explosions in complex geometries–a comparison of several approaches,” International Journal of Protective Structures, vol. 1, no. 2, pp. 169–195, 2010. View at Publisher · View at Google Scholar · View at Scopus
  23. M. Larcher, A. Stolz, L. Rüdiger, and M. Steyerer, “Statische Ersatzlasten und “Ingenieurverfahren”,” in Berichte aus dem Konstruktiven Ingenieurbau Workshop Bau-Protect, N. Gebbeken, K. Thoma, M. Rüdiger, and M. Klaus, Eds., pp. 117–130, Universität der Bundeswehr München, Neubiberg, Germany, 2012. View at Google Scholar
  24. FEMA, “Site and urban design for security–guidance against potential terrorist attacks,” FEMA, Washington, DC, USA, 2007, Tech. Rep. FEMA 430. View at Google Scholar
  25. Joint Research Centre and Commissariat à l’énergie atomique et aux énergies alternatives, EUROPLEXUS, http://www-epx.cea.fr/.
  26. Commissariat à l’énergie atomique et aux énergies alternatives, CAST3M, http://www-cast3m.cea.fr/.
  27. ParaView, http://www.paraview.org.
  28. F. Daude and P. Galon, “On the computation of the baer–nunziato model using ALE formulation with HLL-and HLLC-type solvers towards fluid–structure interactions,” Journal of Computational Physics, vol. 324, pp. 189–230, 2016. View at Publisher · View at Google Scholar · View at Scopus
  29. M. Larcher, F. Casadei, and G. Solomos, “Simulation of blast waves by using mapping technology in EUROPLEXUS,” Joint Research Centre, Publications Office of the European Union, Luxembourg, 2014, Tech. Rep. JRC91102. View at Google Scholar
  30. E. Lee, J. Horning, and J. Kury, “Adiabatic expansion of high explosives detonation products,” University of California, Lawrence Livermore National Laboratory, Livermore, CA, USA, 1968, Tech. Rep. TID 4500-UCRL 50422. View at Google Scholar
  31. B. Dobratz and P. Crawford, LLNL Explosives Handbook: Properties of Chemical Explosives and Explosive Simulants, University of California, Lawrence Livermore National Laboratory, Livermore, CA, USA, 1985.