Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 4028186, 16 pages
https://doi.org/10.1155/2018/4028186
Research Article

Strengthening of RCC Beams in Shear by Using SBR Polymer-Modified Ferrocement Jacketing Technique

Department of Civil Engineering, Thapar University, Patiala, Punjab 147004, India

Correspondence should be addressed to Rajinder Ghai; moc.liamg@rednijariahg

Received 24 August 2017; Accepted 21 November 2017; Published 13 February 2018

Academic Editor: Lucia Figuli

Copyright © 2018 Rajinder Ghai et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. S. F. A. Rafeeqi, S. H. Lodhi, and Z. R. Wadalawala, “Behaviour of reinforced concrete beams strengthened in shear,” Journal of Ferrocement, vol. 35, no. 1, pp. 479–489, 2005. View at Google Scholar
  2. H. A. Ezz-Eldeen, “An experimental study on strengthening and retrofitting of damaged reinforced concrete beams using steel wire mesh and steel angles,” International Journal of Engineering Research and Technology, vol. 4, no. 5, pp. 164–173, 2015. View at Google Scholar
  3. M. B. S. Alferjani, A. A. B. A. Samad, B. S. Elrawaff, N. B. Mohamad, and M. H. B. Ahmad, “Shear strengthening of reinforced concrete beams using carbon fiber reinforced polymer laminate: a review,” American Journal of Civil Engineering, vol. 2, no. 1, pp. 1–7, 2014. View at Publisher · View at Google Scholar
  4. S. B. Singh, “Shear response and design of RC beams strengthened using CFRP laminates,” International Journal of Advanced Structural Engineering, vol. 5, no. 1, pp. 1–16, 2013. View at Publisher · View at Google Scholar · View at Scopus
  5. S. Ahmad, A. Elahi, S. A. Barbhuiya, and Y. Farid, “Use of polymer modified mortar in controlling cracks in reinforced concrete beams,” Construction and Building Materials, vol. 27, no. 1, pp. 91–96, 2012. View at Publisher · View at Google Scholar · View at Scopus
  6. H. R. Ronagh and A. Eslami, “Flexural retrofitting of RC buildings using GFRP/CFRP—a comparative study,” Composites Part B: Engineering, vol. 46, pp. 188–196, 2012. View at Publisher · View at Google Scholar · View at Scopus
  7. H. S. Kim and Y. S. Shin, “Flexural behavior of reinforced concrete (RC) beams retrofitted with hybrid fiber reinforced polymers (FRPs) under sustaining loads,” Composite Structures, vol. 93, no. 2, pp. 802–811, 2011. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. T. Obaidat, S. Heyden, O. Dahlblom, G. Abu-Farsakh, and Y. Abdel-Jawad, “Retrofitting of reinforced concrete beams using composite laminates,” Construction and Building Materials, vol. 25, no. 2, pp. 591–597, 2011. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Kothandaraman and G. Vasudevan, “Flexural retrofitting of RC beams using external bars at soffit level—an experimental study,” Construction and Building Materials, vol. 24, no. 11, pp. 2208–2216, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. P. P. Bansal, M. Kumar, and S. K. Kaushik, “Effect of type of wire mesh on strength of beams retrofitted using ferrocement laminates,” National Building Materials and Construction, vol. 2, no. 1, pp. 272–278, 2008. View at Google Scholar
  11. S. A. Sheikh, D. DeRose, and J. Mardukhi, “Retrofitting of concrete structures for shear and flexure with fiber-reinforced polymers,” ACI Structural Journal, vol. 99, no. 4, pp. 451–459, 2002. View at Publisher · View at Google Scholar
  12. Y. C. Wang and K. Hsu, “Design recommendations for the strengthening of reinforced concrete beams with externally bonded composite plates,” Composite Structures, vol. 88, no. 2, pp. 323–332, 2009. View at Publisher · View at Google Scholar · View at Scopus
  13. M. Z. Jumaat and M. A. Alam, “Behaviour of U and L shaped end anchored steel plate strengthened reinforced concrete beams,” European Journal of Scientific Research, vol. 22, no. 2, pp. 184–196, 2008. View at Google Scholar
  14. P. P. Bansal, M. Kumar, M. Kaur, and S. Kaushik, “Effect of different bonding agents on strength of retrofitted beams using ferrocement laminates,” Indian Concrete Journal, vol. 80, no. 8, pp. 36–42, 2006. View at Google Scholar
  15. S. Sheela and B. Anu Geetha, “Studies on the performance of RC beam–column joints strengthened using different composite materials,” Journal of the Institution of Engineers (India): Series A, vol. 93, no. 1, pp. 63–71, 2012. View at Publisher · View at Google Scholar
  16. M. Jumaat and A. Alam, “Flexural strengthening of reinforced concrete beams using ferrocement laminate with skeletal bars,” Journal of Applied Sciences Research, vol. 2, no. 9, pp. 559–566, 2006. View at Google Scholar
  17. K. Eswaran, J. Sridhar, N. Karunya, and R. A. Ranee, “Study on strengthening of predamaged reinforced concrete beam using ferrocement laminates—a review,” International Research Journal of Engineering and Technology, vol. 3, no. 3, pp. 325–331, 2016. View at Google Scholar
  18. N. Karunya, R. A. Ranee, K. Eswaran, and J. Sridhar, “Study on flexural strengthening of RC beams using ferrocement laminates with Recron-3S fibre—a review,” International Research Journal of Engineering and Technology, vol. 3, no. 2, pp. 199–205, 2016. View at Google Scholar
  19. S. R. Dakhane, K. P. Gatlewar, A. G. Bahale, and A. D. Raut, “Review on analysis of ferrocement-construction material,” in Proceedings of the International Conference on Science and Technology for Sustainable Development (ICSTSD)–2016, pp. 88–93, Kuala Lumpur, Malaysia, May 2016.
  20. S. U. Khan, S. Rafeeqi, and T. Ayub, “Strengthening of RC beams in flexure using ferrocement,” Iranian Journal of Science and Technology, Transactions of Civil Engineering, vol. 37, pp. 353–365, 2013. View at Google Scholar
  21. S. S. Patil, R. Ogale, and A. K. Dwivedi, “Performances of chicken mesh on strength of beams retrofitted using ferrocement jackets,” Journal of Engineering, vol. 2, no. 7, pp. 1–10, 2012. View at Google Scholar
  22. M. V. Reddy and E. Maheshwar, “Rehabilitation of shear deficient RC beams,” International Journal of Earth Sciences and Engineering, vol. 4, no. 6, pp. 1125–1128, 2011. View at Google Scholar
  23. P. R. Kumar, T. Oshima, S. Mikami, and T. Yamazaki, “Seismic retrofit of square reinforced concrete piers by ferrocement jacketing,” Structure and Infrastructure Engineering, vol. 1, no. 4, pp. 253–262, 2005. View at Publisher · View at Google Scholar
  24. O. Lalaj, Y. Yardım, and S. Yılmaz, “Recent perspectives for ferrocement,” Research on Engineering Structures and Materials, vol. 1, no. 1, pp. 11–23, 2015. View at Publisher · View at Google Scholar
  25. A. E. Naaman, Ferrocement and Laminated Cementitious Composites, vol. 3000, Techno Press, Ann Arbor, MI, USA, 2000.
  26. N. Rengaswamy, V. Saraswathy, and K. Balakrishnan, “Studies on the effect of an inhibitor admixture in ferrocement,” Journal of Ferrocement, vol. 22, no. 4, pp. 359–371, 1992. View at Google Scholar
  27. C. L. C. Roxas, R. S. Gallardo, B. Teodosio, E. K. T. Ochosa, and S. E. Young, “Durability of ferrocement garbage disposal barge,” in Proceedings of the DLSU Research Congress 2013, pp. 1–7, De La Salle University, Manila, Philippines, March 2013.
  28. L. Andal, M. Palanichamy, and M. Sekar, “Strength and durability of polymer and fly ash modified ferrocement roofing/flooring elements,” in Proceedings of the 33rd Conference on Our World in Concrete & Structures, vol. 25, Singapore, August 2008.
  29. X. M. Kong, C. C. Wu, Y. R. Zhang, and J. L. Li, “Polymer-modified mortar with a gradient polymer distribution: preparation, permeability, and mechanical behaviour,” Construction and Building Materials, vol. 38, pp. 195–203, 2013. View at Publisher · View at Google Scholar · View at Scopus
  30. M. Ramli and A. A. Tabassi, “Effects of polymer modification on the permeability of cement mortars under different curing conditions: a correlational study that includes pore distributions, water absorption and compressive strength,” Construction and Building Materials, vol. 28, no. 1, pp. 561–570, 2012. View at Publisher · View at Google Scholar · View at Scopus
  31. R. Wang, P. M. Wang, and L. J. Yao, “Effect of redispersible vinyl acetate and versatate copolymer powder on flexibility of cement mortar,” Construction and Building Materials, vol. 27, no. 1, pp. 259–262, 2012. View at Publisher · View at Google Scholar · View at Scopus
  32. S. Marceau, F. Lespinasse, J. Bellanger, C. Mallet, and F. Boinski, “Microstructure and mechanical properties of polymer-modified mortars,” European Journal of Environmental and Civil Engineering, vol. 16, no. 5, pp. 571–581, 2012. View at Publisher · View at Google Scholar · View at Scopus
  33. Z. Zhang, P. Wang, and J. Wu, “Dynamic mechanical properties of eva polymer-modified cement paste at early age,” Physics Procedia, vol. 25, pp. 305–310, 2012. View at Publisher · View at Google Scholar
  34. J. Chen, S. Zhang, J. Y. Liu, and X. R. Zhou, “Preparation and properties of cement mortar modified by VAE latex,” Advanced Materials Research, vol. 306-307, pp. 913–916, 2011. View at Publisher · View at Google Scholar · View at Scopus
  35. Y. Y. Wu, B. G. Ma, J. Wang, F. C. Zhang, and S. W. Jian, “Study on interface properties of EVA-modified cement mortar,” Advanced Materials Research, vol. 250–253, pp. 875–880, 2011. View at Publisher · View at Google Scholar · View at Scopus
  36. N. Žižková, R. Drochytka, and K. Nosek, “Polymer-modified mortars for surface treatment with the utilization of waste polystyrene,” Key Engineering Materials, vol. 466, pp. 141–150, 2011. View at Publisher · View at Google Scholar · View at Scopus
  37. M. Y. L. Chew, P. P. Tan, and Y. S. Yeo, “Effect of styrene acrylic ester polymer on mortar render properties,” Architectural Science Review, vol. 47, no. 1, pp. 43–52, 2004. View at Publisher · View at Google Scholar
  38. B. Vektaris, E. Smetonaitė, and V. Vilkas, “The influence of polymer latex and silica fume additives on the properties of cement mortar and concrete,” Journal of Civil Engineering and Management, vol. 9, no. 2, pp. 146–152, 2003. View at Publisher · View at Google Scholar
  39. Y. Ohama, Handbook of Polymer-Modified Concrete and Mortars: Properties and Process Technology, Noyes Publications, Saddle River, NJ, USA, 1995.
  40. S. Sheela and N. Ganesan, “Cracking characteristics of polymer modified ferrocement flexural elements,” International Journal of Emerging Technology and Advanced Engineering, vol. 4, no. 4, pp. 901–911, 2014. View at Google Scholar
  41. C. B. Cheah and M. Ramli, “Load capacity and crack development characteristics of HCWA–DSF high strength mortar ferrocement panels in flexure,” Construction and Building Materials, vol. 36, pp. 348–357, 2012. View at Publisher · View at Google Scholar · View at Scopus
  42. M. Ramli and A. A. Tabassi, “Mechanical behaviour of polymer-modified ferrocement under different exposure conditions: an experimental study,” Composites Part B: Engineering, vol. 43, no. 2, pp. 447–456, 2012. View at Publisher · View at Google Scholar · View at Scopus
  43. V. Bhikshma, R. Kishore, and R. Srinivas, “Durability of polymer and fly ash modified ferro cement elements,” Procedia Engineering, vol. 14, pp. 2642–2649, 2011. View at Publisher · View at Google Scholar · View at Scopus
  44. S. Sheela and M. S. Ajith, “Flexural behaviour of polymer modified ferrocement elements in chloride environment,” in Proceedings of the 3rd International Conference on the Durability of Concrete Structures, pp. 1–6, Queen’s University, Belfast, Northern Ireland, September 2012.
  45. R. Ghai, P. P. Bansal, and M. Kumar, “Mechanical properties of styrene-butadiene-rubber latex (SBR) and vinyl-acetate-ethylene (VAE) polymer modified ferrocement (PMF),” Journal of Polymer Materials, vol. 33, no. 1, pp. 111–126, 2016. View at Google Scholar
  46. A. S. Ali, H. S. Jawad, and I. S. Majeed, “Improvement the properties of cement mortar by using styrene butadiene rubber polymer,” Journal of Engineering and Development, vol. 16, no. 3, pp. 61–72, 2012. View at Google Scholar
  47. R. Wang and P. M. Wang, “Application of styrene-butadiene rubber in cement-based materials,” Advanced Materials Research, vol. 306-307, pp. 588–593, 2011. View at Publisher · View at Google Scholar · View at Scopus
  48. Z. J. Wang, R. Wang, and Y. B. Cheng, “Mechanical properties and microstructures of cement mortar modified with styrene-butadiene polymer emulsion,” Advanced Materials Research, vol. 168–170, pp. 190–194, 2011. View at Publisher · View at Google Scholar · View at Scopus
  49. G. Barluenga and F. Hernández-Olivares, “SBR latex modified mortar rheology and mechanical behaviour,” Cement and Concrete Research, vol. 34, no. 3, pp. 527–535, 2004. View at Publisher · View at Google Scholar · View at Scopus
  50. D. R. Kumar and B. Vidivelli, “Acrylic rubber latex in ferrocement for strengthening reinforced concrete beams,” American Journal of Engineering and Applied Sciences, vol. 3, no. 2, pp. 277–285, 2010. View at Publisher · View at Google Scholar
  51. D. R. Kumar and B. Vidivelli, “Performances of SBR latex modified ferrocement for repairing reinforced concrete beams,” Australian Journal of Basic and Applied Sciences, vol. 4, no. 3, pp. 520–531, 2010. View at Google Scholar
  52. H. P. Liao and S. S. Fang, “An experimental study on flexural behavior of reinforced concrete beams strengthened with high-performance ferrocement,” Advanced Materials Research, vol. 163–167, pp. 3772–3776, 2010. View at Publisher · View at Google Scholar · View at Scopus
  53. B. Hughes and N. Evbuomwan, “Polymer-modified ferrocement enhances strength of reinforced concrete beams,” Construction and Building Materials, vol. 7, no. 1, pp. 9–12, 1993. View at Publisher · View at Google Scholar · View at Scopus
  54. C. Y. Zhao, S. M. Huang, Q. L. Yao, and Y. J. Chen, “Research on shearing performance of RC beams strengthened with steel wire-polymer mortar,” Applied Mechanics and Materials, vol. 166–169, pp. 1702–1708, 2012. View at Publisher · View at Google Scholar · View at Scopus
  55. IS: 1489 (Part 1)–1991, Portland-Pozzolana Cement Specification, Bureau of Indian Standards, New Delhi, India, 1991.
  56. IS: 383–1970, Specification for Coarse and Fine Aggregates from Natural Sources for Concrete, Bureau of Indian Standards, New Delhi, India, 2002.
  57. IS 2386 (Part III)–1963, Methods of Test for Aggregates for Concrete, Bureau of Indian Standards, New Delhi, India, 1997.
  58. ACI Committee 549 (ACI 549.1R-93), “Guide for the Design, Construction, and Repair of Ferrocement,” American Concrete Institute, Detroit, MI, USA, 1999. View at Google Scholar
  59. Sika® Latex Power, “SBR Based Multipurpose Polymer for Waterproofing and Repair,” Sika India Pvt. Ltd, Kolkata, India.
  60. M. Afridi, Y. Ohama, M. Z. Iqbal, and K. Demura, “Water retention and adhesion of powdered and aqueous polymer-modified mortars,” Cement and Concrete Composites, vol. 17, no. 2, pp. 113–118, 1995. View at Publisher · View at Google Scholar · View at Scopus
  61. IS 10262–2009, Concrete Mix Proportioning-Guidelines, Bureau of Indian Standards, New Delhi, India, 2009.
  62. ASTM C 1437–07, Standard Test Method for Flow of Hydraulic Cement Mortar, ASTM International, West Conshohocken, PA, USA, 2007.
  63. IS 456:2000, Plain and Reinforced Concrete-Code of Practice, Bureau of Indian Standards, New Delhi, India, 2000.