Research Article
Analysis Method for Reinforcing Circular Openings in Isotropic Homogeneous Plate-Like Structures Subjected to Blast Loading
| Test group | Support conditions | Material1 | Width, (m) | Height, (m) | Circular hole diameter, (cm) | Circular hole location, (m) | Circular hole location, (m) |
| TM-1 | One-way | Carbon steel | 8 | 4 | 15 | 4 | 2 | TM-2 | One-way | Carbon steel | 8 | 4 | 15 | 4 | 1 | TM-3 | One-way | Titanium | 8 | 4 | 25 | 4 | 2 | TM-4 | One-way | Titanium | 8 | 4 | 25 | 4 | 1 | TM-5 | Two-way | Carbon steel | 8 | 4 | 15 | 4 | 2 | TM-6 | Two-way | Carbon steel | 8 | 4 | 15 | 6 | 1 | TM-7 | Two-way | Titanium | 10 | 8 | 30 | 5 | 4 | TM-8 | Two-way | Titanium | 10 | 8 | 30 | 8 | 2 |
|
|
1Refer to Table 5 for material properties. |