Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 4720564, 9 pages
https://doi.org/10.1155/2018/4720564
Research Article

Effect of Low-Stress Fatigue on the Off-Crack-Plane Fracture Energy in Engineered Cementitious Composites

1School of Transportation Science and Engineering, Beihang University, Beijing 100191, China
2School of Civil and Transportation Engineering, Hebei University of Technology, Tianjin 300401, China
3Department of Structures and Materials, China Institute of Water Resources and Hydropower Research, Beijing 100038, China

Correspondence should be addressed to Dahai Huang; moc.qq@15730795

Received 27 August 2017; Revised 16 November 2017; Accepted 21 November 2017; Published 4 March 2018

Academic Editor: Peng Zhang

Copyright © 2018 Longlong Liu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Elices, G. V. Guinea, and J. Planas, “Measurement of the fracture energy using three-point bend tests: part 3—influence of cutting the P-δ tail,” Materials and Structures, vol. 25, no. 6, pp. 327–334, 1992. View at Publisher · View at Google Scholar · View at Scopus
  2. V. C. Li and T. Hashida, “Engineering ductile fracture in brittle-matrix composites,” Journal of Materials Science Letters, vol. 12, no. 12, pp. 898–901, 1993. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Zhang, Z. Wang, X. Ju, and Z. Shi, “Simulation of flexural performance of layered ECC-concrete composite beam with fracture mechanics model,” Engineering Fracture Mechanics, vol. 131, pp. 419–438, 2014. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Zhang, C. K. Y. Leung, and Y. Gao, “Simulation of crack propagation of fiber reinforced cementitious composite under direct tension,” Engineering Fracture Mechanics, vol. 78, no. 12, pp. 2439–2454, 2011. View at Publisher · View at Google Scholar · View at Scopus
  5. J. Zhang and H. Stang, “Interfacial degradation in cement-based fiber reinforced cement-based composites,” Journal of Materials Science Letters, vol. 16, no. 11, pp. 886–888, 1997. View at Google Scholar
  6. J. Qiu and E. Yang, “Micromechanics-based investigation of fatigue deterioration of engineered cementitious composite (ECC),” Cement and Concrete Research, vol. 95, pp. 65–74, 2017. View at Publisher · View at Google Scholar · View at Scopus
  7. E. B. Pereira, G. Fischer, and J. A. O. Barros, “Effect of hybrid fiber reinforcement on the cracking process in fiber reinforced cementitious composites,” Cement and Concrete Composites, vol. 34, no. 10, pp. 1114–1123, 2012. View at Publisher · View at Google Scholar · View at Scopus
  8. S. Müller and V. Mechtcherine, “Fatigue behaviour of strain-hardening cement-based composites (SHCC),” Cement and Concrete Research, vol. 92, pp. 75–83, 2017. View at Publisher · View at Google Scholar · View at Scopus
  9. S. G. Millard, T. C. K. Molyneaux, S. J. Barnett, and X. Gao, “Dynamic enhancement of blast-resistant ultra high performance fibre-reinforced concrete under flexural and shear loading,” International Journal of Impact Engineering, vol. 37, no. 4, pp. 405–413, 2010. View at Publisher · View at Google Scholar · View at Scopus
  10. J. Zhang, H. Stang, and V. C. Li, “Fatigue life prediction of fiber reinforced concrete under flexural load,” International Journal of Fatigue, vol. 21, no. 10, pp. 1033–1049, 1999. View at Publisher · View at Google Scholar · View at Scopus
  11. Z. Wu, S. Xu, J. Wang, and Y. Liu, “Double-k fracture parameter of concrete and its size effect by using three-point bending beam method,” Journal of Hydroelectric Engineering, vol. 71, pp. 16–24, 2000. View at Google Scholar
  12. D. Y. Yoo, J. H. Lee, and Y. S. Yoon, “Effect of fiber content on mechanical and fracture properties of ultra high performance fiber reinforced cementitious composites,” Composite Structures, vol. 106, pp. 742–753, 2013. View at Publisher · View at Google Scholar · View at Scopus
  13. W. Liu, S. Xu, and Q. Li, “Experimental study on fracture performance of ultra-high toughness cementitious composites with J-integral,” Engineering Fracture Mechanics, vol. 96, pp. 656–666, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. E. H. Yang, S. Wang, and Y. Z. Yang, “Fiber-bridging constitutive law of engineered cementitious composites,” Journal of Advanced Concrete Technology, vol. 6, no. 1, pp. 181–193, 2008. View at Publisher · View at Google Scholar · View at Scopus
  15. P. Kabele, “Multiscale framework for modeling of fracture in high performance fiber reinforced cementitious composites,” Engineering Fracture Mechanics, vol. 74, no. 1-2, pp. 194–209, 2007. View at Publisher · View at Google Scholar · View at Scopus
  16. N. M. Altwair, M. A. Megat Johari, and S. F. Saiyid Hashim, “Flexural performance of green engineered cementitious composites containing high volume of palm oil fuel ash,” Construction and Building Materials, vol. 37, pp. 518–525, 2012. View at Publisher · View at Google Scholar · View at Scopus
  17. Z. Lin and V. C. Li, “Crack bridging in fiber reinforced cementitious composites with slip-hardening interfaces,” Journal of the Mechanics and Physics of Solids, vol. 45, no. 5, pp. 763–787, 1997. View at Publisher · View at Google Scholar
  18. S. Xu and W. Liu, “Investigation on crack propagation law of ultra-high toughness cementitious composites under fatigue flexure,” Engineering Fracture Mechanics, vol. 93, no. 1, pp. 1–12, 2012. View at Publisher · View at Google Scholar · View at Scopus
  19. V. C. Li, “Engineered cementitious composite (ECC): material, structural, and durability performance,” in Concrete Construction Engineering Handbook, CRC Press, Boca Raton, FL, USA, 2007. View at Google Scholar
  20. S. H. Said, H. A. Razak, and I. Othman, “Flexural behavior of engineered cementitious composite (ECC) slabs with polyvinyl alcohol fibers,” Construction and Building Materials, vol. 75, pp. 176–188, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. C. Lu, C. K. Y. Leung, and V. C. Li, “Numerical model on the stress field and multiple cracking behavior of engineered cementitious composites (ECC),” Construction and Building Materials, vol. 133, pp. 118–127, 2017. View at Publisher · View at Google Scholar · View at Scopus
  22. D. G. H. Latzko, Post-Yield Fracture Mechanics, Applied Science Publishers, London, UK, 1979.
  23. G. L. G. Gonzáles, J. A. O. González, J. T. P. Castro, and J. L. F. Freire, “A J-integral approach using digital image correlation for evaluating stress intensity factors in fatigue cracks with closure effects,” Theoretical and Applied Fracture Mechanics, vol. 90, pp. 14–21, 2017. View at Publisher · View at Google Scholar · View at Scopus
  24. V. C. Li, Engineered Cementitious Composites (ECC)–Tailored Composites through Micromechanical Modelling, Canadian Society of Civil Engineers, Montreal, QC, Canada, 1998.
  25. M. Maalej, T. Hashida, and V. C. Li, “Effect of fiber volume fraction on the off-crack-plane fracture energy in strain-hardening engineered cementitious composites,” Journal of the American Ceramic Society, vol. 78, no. 12, pp. 3369–3375, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. J. Li and Y. X. Zhang, “Evaluation of constitutive models of hybrid-fibre engineered cementitious composites under dynamic loadings,” Construction and Building Materials, vol. 30, pp. 149–160, 2012. View at Publisher · View at Google Scholar · View at Scopus
  27. H. Li and S. Xu, “Determination of energy consumption in the fracture plane of ultra high toughness cementitious composite with direct tension test,” Engineering Fracture Mechanics, vol. 78, no. 9, pp. 1895–1905, 2011. View at Publisher · View at Google Scholar · View at Scopus
  28. S. Xu and H. W. Reinhardt, “Determination of double-K criterion for crack propagation inquasi-brittle fracture, part III: compact tension specimens and wedge splitting specimens wedge splitting specimens,” International Journal of Fracture, vol. 98, pp. 179–193, 1999. View at Google Scholar
  29. K. Duan, X. Z. Hu, and F. H. Wittmann, “Size effect on fracture resistance and fracture energy of concrete,” Materials and Structures, vol. 36, no. 2, pp. 74–80, 2003. View at Publisher · View at Google Scholar
  30. V. C. Li and H. C. Wu, “Conditions for pseudo strain-hardening in fiber reinforced brittle matrix composites,” Journal of Applied Mechanics Review, vol. 45, no. 8, pp. 390–398, 1992. View at Publisher · View at Google Scholar · View at Scopus
  31. P. Jun and V. Mechtcherine, “Behaviour of strain-hardening cement-based composites (SHCC) under monotonic and cyclic tensile loading,” Cement and Concrete Composites, vol. 32, no. 10, pp. 801–809, 2010. View at Publisher · View at Google Scholar · View at Scopus
  32. J. Zhang and V. C. Li, “Monotonic and fatigue performance in bending of fiber-reinforced engineered cementitious composite in overlay system,” Cement and Concrete Research, vol. 32, no. 3, pp. 415–423, 2002. View at Publisher · View at Google Scholar · View at Scopus
  33. J. Zhang, H. Stang, and V. C. Li, “Experimental study on crack bridging in FRC under uniaxial fatigue tension,” Journal of Materials in Civil Engineering, vol. 12, no. 1, pp. 65–73, 2000. View at Publisher · View at Google Scholar · View at Scopus
  34. S. He, J. Qiu, J. Li, and E. H. Yang, “Strain hardening ultra-high performance concrete (SHUHPC) incorporating CNF-coated polyethylene fibers,” Cement and Concrete Research, vol. 98, pp. 50–60, 2017. View at Publisher · View at Google Scholar · View at Scopus
  35. W. Liu, S. Xu, and Q. Li, “Study on flexural fatigue life of ultra-high toughness cementitious composites under constant amplitude cyclic loading,” Journal of Building Structures, vol. 33, pp. 119–127, 2012. View at Google Scholar
  36. Z. Zhang and S. Qian, “Investigating mechanical properties and self-healing behavior of micro-cracked ECC with different volume of fly ash,” Construction and Building Materials, vol. 52, pp. 17–23, 2014. View at Publisher · View at Google Scholar · View at Scopus
  37. A. Skar, P. N. Poulsen, and J. F. Olesen, “A simple model for fatigue crack growth in concrete applied to a hinge beam model,” Engineering Fracture Mechanics, vol. 181, pp. 38–51, 2017. View at Publisher · View at Google Scholar · View at Scopus