Table of Contents Author Guidelines Submit a Manuscript
Advances in Civil Engineering
Volume 2018, Article ID 8917059, 9 pages
https://doi.org/10.1155/2018/8917059
Research Article

The Optimization of Calcareous Fly Ash-Added Cement Containing Grinding Aids and Strength-Improving Additives

1Kastamonu Vocational School, Kastamonu University, Kastamonu, Turkey
2Engineering Faculty, Civil Engineering Department, Karamanoglu MehmetBey University, Karaman, Turkey
3Engineering Faculty, Civil Engineering Department, Kastamonu University, Kastamonu, Turkey
4Engineering Faculty, Civil Engineering Department, Manisa Celal Bayar University, Manisa, Turkey

Correspondence should be addressed to Gökhan Kaplan; rt.ude.unomatsak@nalpakg

Received 29 July 2017; Revised 30 October 2017; Accepted 9 November 2017; Published 28 January 2018

Academic Editor: Arnaud Perrot

Copyright © 2018 Gökhan Kaplan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Jankovic, W. Valery, and E. Davis, “Cement grinding optimisation,” Minerals Engineering, vol. 17, no. 11-12, pp. 1075–1081, 2004. View at Publisher · View at Google Scholar · View at Scopus
  2. H. Dundar, H. Benzer, N. A. Aydogan et al., “Simulation assisted capacity improvement of cement grinding circuit: case study cement plant,” Minerals Engineering, vol. 24, no. 3-4, pp. 205–210, 2011. View at Publisher · View at Google Scholar · View at Scopus
  3. H. Benzer, L. Ergün, M. Öner, and A. J. Lynch, “Simulation of open circuit clinker grinding,” Minerals Engineering, vol. 14, no. 7, pp. 701–710, 2001. View at Publisher · View at Google Scholar · View at Scopus
  4. G. Atesok, M. Ozer, F. Boylu, and H. Dincer, “The effect of anionic dispersants on grindability of different rank coals,” International Journal of Mineral Processing, vol. 77, no. 4, pp. 199–207, 2005. View at Publisher · View at Google Scholar · View at Scopus
  5. J. J. Assaad, “Industrial versus Laboratory clinker processing using grinding aids (scale effect),” Advances in Materials Science and Engineering, vol. 2015, Article ID 938176, 12 pages, 2015. View at Publisher · View at Google Scholar · View at Scopus
  6. J. J. Assaad and C. A. Issa, “Effect of clinker grinding aids on flow of cement-based materials,” Cement and Concrete Research, vol. 63, pp. 1–11, 2014. View at Publisher · View at Google Scholar · View at Scopus
  7. V. S. Ramachandran, “Hydration of cement—role of triethanolamine,” Cement and Concrete Research, vol. 6, no. 5, pp. 623–631, 1976. View at Publisher · View at Google Scholar · View at Scopus
  8. Z. Heren and H. Ölmez, “The influence of ethanolamines on the hydration and mechanical properties of Portland cement,” Cement and Concrete Research, vol. 26, no. 5, pp. 701–705, 1996. View at Publisher · View at Google Scholar · View at Scopus
  9. M. Ichikawa, M. Kanaya, and S. Sano, “Effect of triisopropanolamine on hydration and strength development of cements with different character,” in Proceedings of the 10th International Congress on the Chemistry of Cement, vol. 3, p. 3iii005, Gothenburg, Sweden, 1997.
  10. O. Altun, H. Benzer, A. Toprak, and U. Enderle, “Utilization of grinding aids in dry horizontal stirred milling,” Powder Technology, vol. 286, pp. 610–615, 2015. View at Publisher · View at Google Scholar · View at Scopus
  11. T. Zhang, J. Gao, and J. Hu, “Preparation of polymer-based cement grinding aid and their performance on grindability,” Construction and Building Materials, vol. 75, pp. 163–168, 2015. View at Publisher · View at Google Scholar · View at Scopus
  12. H. Li, J. Zhao, Y. Huang et al., “Investigation on the potential of waste cooking oil as a grinding aid in Portland cement,” Journal of Environmental Management, vol. 184, pp. 545–551, 2016. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Zhang, A. Fei, and D. Li, “Utilization of waste glycerin, industry lignin and cane molasses as grinding aids in blended cement,” Construction and Building Materials, vol. 123, pp. 785–791, 2016. View at Publisher · View at Google Scholar · View at Scopus
  14. T. Heller, T. Müller, and D. Honert, “Cement additives based on PCE,” ZKG International, vol. 64, no. 2, pp. 40–48, 2011. View at Google Scholar
  15. E. Sakai, A. Ishida, and A. Ohta, “New trends in the development of chemical admixtures in Japan,” Journal of Advanced Concrete Technology, vol. 4, no. 2, pp. 211–223, 2006. View at Publisher · View at Google Scholar · View at Scopus
  16. J. Plank, E. Sakai, C. W. Miao, C. Yu, and J. X. Hong, “Chemical admixtures—chemistry, applications and their impact on concrete microstructure and durability,” Cement and Concrete Research, vol. 78, pp. 81–99, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. Z. Sun, H. Yanga, L. Shui et al., “Preparation of polycarboxylate-based grinding aid and its influence on cement properties under laboratory condition,” Construction and Building Materials, vol. 127, pp. 363–368, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. E. Ghiasvand and A. A. Ramezanianpour, “Effect of grinding method and particle size distribution on long term properties of binary and ternary cements,” Construction and Building Materials, vol. 134, pp. 75–82, 2017. View at Publisher · View at Google Scholar · View at Scopus
  19. K. H. Yang, Y. B. Jung, M. S. Cho, and S. H. Tae, “Effect of supplementary cementitious materials on reduction of CO2 emissions from concrete,” Journal of Cleaner Production, vol. 103, pp. 774–783, 2015. View at Publisher · View at Google Scholar · View at Scopus
  20. T. Sato and J. J. Beaudoin, “Effect of nano-CaCO3 on hydration of cement containing supplementary cementitious materials,” Advances in Cement Research, vol. 23, no. 1, pp. 33–43, 2011. View at Publisher · View at Google Scholar · View at Scopus
  21. Z. Liu, Y. Zhang, and Q. Jiang, “Continuous tracking of the relationship between resistivity and pore structure of cement pastes,” Construction and Building Materials, vol. 53, pp. 26–31, 2014. View at Publisher · View at Google Scholar · View at Scopus
  22. R. Snellings, “Assessing, understanding and unlocking supplementary cementitious materials,” RILEM Technical Letters, vol. 1, p. 50, 2016. View at Publisher · View at Google Scholar
  23. L. Lam, Y. L. Wong, and C. S. Poon, “Degree of hydration and gel/space ratio of high-volume fly ash/cement systems,” Cement and Concrete Research, vol. 30, no. 5, pp. 747–756, 2000. View at Publisher · View at Google Scholar · View at Scopus
  24. P. Hou, S. Kawashima, D. Kong, D. J. Corr, J. Qian, and S. P. Shah, “Modification effects of colloidal nanoSiO2 on cement hydration and its gel property,” Composites Part B: Engineering, vol. 45, no. 1, pp. 440–448, 2013. View at Publisher · View at Google Scholar · View at Scopus
  25. M. Ahmaruzzaman, “A review on the utilization of fly ash,” Progress in Energy and Combustion Science, vol. 36, no. 3, pp. 327–363, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. J. David Raja Selvam, D. S. Robinson Smart, and I. Dinaharan, “Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by compocasting,” Materials & Design, vol. 49, pp. 28–34, 2013. View at Publisher · View at Google Scholar · View at Scopus
  27. R. Feldman, L. R. Prudencio, and G. Chan, “Rapid chloride permeability test on blended cement and other concretes: correlations between charge, initial current and conductivity,” Construction and Building Materials, vol. 13, no. 3, pp. 149–154, 1999. View at Publisher · View at Google Scholar · View at Scopus
  28. S. W. M. Supit and F. U. A. Shaikh, “Durability properties of high volume fly ash concrete containing nano-silica,” Materials and Structures, vol. 48, no. 8, pp. 2431–2445, 2014. View at Google Scholar
  29. N. Neithalath and J. Jain, “Relating rapid chloride transport parameters of concretes to microstructural features extracted from electrical impedance,” Cement and Concrete Research, vol. 40, no. 7, pp. 1041–1051, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. Z. Liu, D. Xu, and Y. Zhang, “Experimental investigation and quantitative calculation of the degree of hydration and products in fly ash-cement mixtures,” Advances in Materials Science and Engineering, vol. 2017, Article ID 2437270, 12 pages, 2017. View at Publisher · View at Google Scholar · View at Scopus