Research Article
Grouting Mechanism of Cement-Based Slurry in a Concentric Annulus under High Groundwater Pressure
Table 2
The numerical parameters used in the finite element models.
| Parameters | Flow rate control injection mode | Pressure control injection mode |
| Slurry selected | CSG | CG | Radius of the outer cylinder, Ro | 0.10 m | 0.10 m | Radius of the inner cylinder, Ri | 0.07 m | 0.07 m | Pressure applied at the bottom boundary, p | — | 10 kPa | Flow velocity applied at the bottom boundary, | 0.156 m/s | — | Initial groundwater pressure, pw | 5.0 MPa | 5.0 MPa | Total injection time, T | 60 s | 60 s | Slurry viscosity function of penetration length, | | 0.04 Pa·s |
|
|