Research Article
Experimental Investigation on Fracture Evolution in Sandstone Containing an Intersecting Hole under Compression Using DIC Technique
Table 1
Basic parameters of specimens.
| Specimen no. | Density (kg·m−3) | Length (mm) | Width (mm) | Height (mm) | Hole area (mm2) | Note |
| IS-1 | 2391.37 | 100.10 | 25.00 | 150.10 | 0.00 | Intact specimens | IS-2 | 2427.49 | 99.60 | 24.90 | 150.50 | IS-3 | 2467.45 | 100.70 | 24.80 | 150.70 |
| TI-1 | 2382.43 | 100.50 | 23.00 | 150.80 | 156.58 | Specimens containing a three-way intersecting hole | TI-2 | 2408.37 | 100.20 | 24.80 | 151.00 | TI-3 | 2439.81 | 100.40 | 24.70 | 150.90 |
| FI-1 | 2461.65 | 100.30 | 25.00 | 151.00 | 157.08 | Specimens containing a four-way intersecting hole | FI-2 | 2439.30 | 100.40 | 23.50 | 150.60 | FI-3 | 2430.60 | 100.50 | 25.00 | 150.50 |
| SI-1 | 2424.91 | 100.20 | 25.00 | 150.70 | 157.20 | Specimens containing a shaft-roadway intersecting hole | SI-2 | 2433.99 | 100.30 | 25.80 | 150.80 | SI-3 | 2411.55 | 100.60 | 23.40 | 150.50 |
|
|