Research Article
Analysis of the Elastic-Plastic Theoretical Model of the Pull-Out Interface between Geosynthetics and Tailings
Table 1
The technology parameters of the geogrids.
| Mechanical parameters of the staple fibre needling geotextiles | Technical index | Mechanical parameters of the TGSG35 geogrid | Technical index |
| Longitudinal and transverse fracture strength (kN·m−1) | 30 | Tensile strength (kN·m−1) | Radial, zonal | 35 | Elongation corresponding to the standard strength (%) | 40~80 | Nominal elongation (%) | Radial | 15 | CBR breaking strength ≥ (kN) | 13 | Zonal | 13 | Longitudinal and transverse tearing strength ≥ (kN) | 12 | Tensile strength at 2% elongation ≥ (kN·m−1) | Radial | 12 | Equivalent aperture (mm) | 0.05~0.2 | Zonal | 12 | Vertical permeability coefficient (cm·s−1) | 1.0 × 10−3 | Tensile strength at 5% elongation ≥ (kN·m−1) | Radial | 24 | Thickness (mm) | 4.2 | Zonal | 24 |
|
|