Research Article
Numerical Investigation on the Influence of In-Plane Damage on the Out-of-Plane Behavior of Masonry Infill Walls
Table 5
The information and analysis results of infill walls with different slenderness ratios.
| Slenderness ratio (H/T) | 17 | 26 | 34 |
| Thickness (mm) | 96 | 63 | 58 | IP-IDR (%) | 0 | 0.3 | 0.7 | 0 | 0.3 | 0.7 | 0 | 0.3 | 0.7 | Stiffness (kN/mm × 103) | 3.33 | 1.78 | 0.94 | 1.79 | 0.55 | 0.27 | 1.23 | 0.31 | 0.15 | Ultimate load (kN) | 38.1 | 34.0 | 32.3 | 10.6 | 7.8 | 7.2 | 5.3 | 4 | 3.1 |
|
|