Research Article
Numerical Investigation on the Influence of In-Plane Damage on the Out-of-Plane Behavior of Masonry Infill Walls
Table 6
The information and analysis results of infill walls with different masonry strengths.
| Compressive strength of masonry (MPa) | 4.9 | 10.9 | 16.9 |
| Tensile strength of masonry (MPa) | 0.14 | 0.30 | 0.47 | Elastic modulus of masonry (GPa) | 3.7 | 8.2 | 12.7 | IP-IDR (%) | 0 | 0.3 | 0.7 | 0 | 0.3 | 0.7 | 0 | 0.3 | 0.7 | Stiffness (kN/mm × 103) | 0.88 | 0.23 | 0.14 | 1.23 | 0.31 | 0.15 | 1.34 | 0.35 | 0.17 | Ultimate load (kN) | 2.95 | 2.19 | 1.73 | 5.33 | 4.00 | 3.13 | 6.52 | 5.07 | 4.07 |
|
|