Comparison of Design Guidelines for Hot-Rolled I-Shaped Steel Compression Members according to AISC 360-16 and EC3

Table 1

European steel sections examined in the study and nominal values of yield strengths (in N/mm²) for different steel grades.

Section	Section number	Fy (N/mm^2)
		S235	S275	S355	S460
IPE	80, 100, 120, 140, 160, 180, 200, 220, 240, 270, 300, 330, 360, 400, 450, 500, 550, 600	235	275	355	—
IPN	80, 100, 120, 140, 160, 180, 200, 220, 240, 260, 280, 300, 320, 340, 360, 380, 400, 450, 500, 550, 600	235	275	355	—
HEA, HEB, and HEM	100, 120, 140, 160, 180, 200, 220, 240, 260, 280, 300, 320, 340, 360, 400, 450, 500, 550, 600, 650, 700, 800, 900, 1000	235	275	355	—
HD (t ≤ 16 mm)	260 × 54.1, 260 × 68.2, 320 × 74.2, 320 × 97.6	—	275	355	460
HD (16 < t ≤ 40 mm)	260 × 93.0, 260 × 114, 260 × 142, 260 × 172, 320 × 127, 320 × 158, 320 × 198, 320 × 245, 360 × 134, 360 × 147, 360 × 162, 360 × 179, 360 × 196, 400 × 187, 400 × 216, 400 × 237, 400 × 262, 400 × 287, 400 × 314	—	265	345	440
HD (40 < t ≤ 63 mm)	260 × 225, 260 × 299, 320 × 300, 400 × 347, 400 × 382, 400 × 421, 400 × 463, 400 × 509	—	255	335	430
HD (63 < t ≤ 80 mm)	400 × 551, 400 × 592, 400 × 634	—	245	325	410
HD (80 < t ≤ 100 mm)	400 × 677, 400 × 744, 400 × 818	—	235	315	400
HD (100 < t ≤ 150 mm)	400 × 900, 400 × 990, 400 × 1086, 400 × 1202, 400 × 1299	—	225	295	385