An Analysis of Factors Affecting Flowslide Deposit Morphology Using Taguchi Method

Table 3

The signal-to-noise ratio of elements of deposits morphology.

Orthogonal combination	Signal-to-noise ratio (dB)
	(10^-2m)	(10^-2m)	(10^-2m)	A (m^2)	(1)
A1B1C1	35.79	36.31	9.19	−8.76	−0.53
A1B2C2	36.97	36.69	2.92	−7.29	0.27
A1B3C3	37.5	37.46	2.41	−6.51	0.04
A2B1C2	34.32	37.31	8.91	−9.91	−2.99
A2B2C3	39.09	39.48	2.73	−2.1	−0.39
A2B3C1	36.19	37.98	10.18	−7.08	−1.79
A3B1C3	36.57	38.9	12.65	−7.3	−2.33
A3B2C1	38.94	39.56	8.56	−2.95	−0.62
A3B3C2	40.55	40.49	8.88	−0.6	0.06

Note: , maximum sliding length of flowslide deposit on the surface; , maximum width of flowslide deposit; , maximum depth of flowslide deposit; A, area of flowslide deposit projected on horizontal plane; , slope angle; , length-width ratio.