Table of Contents Author Guidelines Submit a Manuscript
Advances in Condensed Matter Physics
Volume 2015, Article ID 980482, 12 pages
http://dx.doi.org/10.1155/2015/980482
Research Article

Characterisation of PMMA/ATH Layers Realised by Means of Atmospheric Pressure Plasma Powder Deposition

1Laboratory of Laser and Plasma Technologies, University of Applied Sciences and Arts, Von-Ossietzky-Straße 99, 37085 Göttingen, Germany
2Institute of Energy Research and Physical Technologies, Clausthal University of Technology, Leibnizstraße 4, 38678 Clausthal-Zellerfeld, Germany
3Clausthal Center of Material Technology (CZM), Clausthal University of Technology, Agricolastraße 2, 38678 Clausthal-Zellerfeld, Germany
4Biotechnical Faculty, University of Ljubljana, Jamnikarjeva 101, Sl-1000 Ljubljana, Slovenia
5Kolpa d.d., Rosalnice 5, Sl-8330 Metlika, Slovenia
6Application Center for Plasma and Photonics, Fraunhofer Institute for Surface Engineering and Thin Films, Von-Ossietzky-Straße 100, 37085 Göttingen, Germany

Received 7 May 2015; Accepted 2 July 2015

Academic Editor: Charles Rosenblatt

Copyright © 2015 Lena M. Wallenhorst et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Wagner and J. Sellers, “Kinetics of filler-polymer interaction between fine particle silica and SBR or butyl rubber,” Industrial & Engineering Chemistry, vol. 51, no. 8, pp. 961–966, 1959. View at Publisher · View at Google Scholar
  2. H. Zhang, M. Lu, Q. Lu, B. He, L. Zhang, and Y. Liu, “Design and preparation of cross-linked α-methylstyrene acrylonitrile copolymer nanoparticles and their interfacial investigation with rubber,” Journal of Applied Polymer Science, vol. 132, no. 18, Article ID 41914, 2015. View at Publisher · View at Google Scholar · View at Scopus
  3. ISO, “Plastics—decorative solid surfacing materials—determination of properties-sheet goods,” ISO 19712-2: 2007, 2007. View at Google Scholar
  4. R. B. Duggins, C. Ford, H. C. Miller, and E. Vassiliou, “Filled polymethyl methacrylate article and a process for its manufacture,” US Patent no. 3,827,933, 1974.
  5. R. B. Duggins and C. Ford, “Use of alumina trihydrate in a polymethyl methacrylate article,” US Patent no. 3,847,865, 1974.
  6. C. R. Peters and J. E. Young, “Process for making bowls comprising acrylic plastic filled with alumina trihydrate,” US Patent no. 6 554 944 b1, 2003.
  7. E. Gunel and C. Basaran, “Influence of filler content and interphase properties on large deformation micromechanics of particle filled acrylics,” Mechanics of Materials, vol. 57, pp. 134–146, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. O. A. Stapountzi, M. N. Charalambides, and J. G. Williams, “Micromechanical models for stiffness prediction of alumina trihydrate (ATH) reinforced poly (methyl methacrylate) (PMMA): effect of filler volume fraction and temperature,” Composites Science and Technology, vol. 69, no. 11-12, pp. 2015–2023, 2009. View at Publisher · View at Google Scholar · View at Scopus
  9. C. Basaran, S. Nie, and C. S. Hutchins, “Time dependent behavior of a particle filled composite PMMA/ATH at elevated temperatures,” Journal of Composite Materials, vol. 42, no. 19, pp. 2003–2025, 2008. View at Publisher · View at Google Scholar · View at Scopus
  10. C. Basaran, S. Nie, C. S. Hutchins, and H. Ergun, “Influence of interfacial bond strength on fatigue life and thermo-mechanical behavior of a particulate composite: an experimental study,” International Journal of Damage Mechanics, vol. 17, no. 2, pp. 123–147, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. I. Sobolev and E. A. Woycheshin, “Alumina trihydrate,” in Handbook of Fillers for Plastics, H. S. Katz, Ed., Van Nostrand Reinhold, New York, NY, USA, 1987. View at Google Scholar
  12. H. S. Katz and J. V. Milewski, Handbook of Fillers for Plastics, Van Nostrand Reinhold, New York, NY, USA, 1987.
  13. A. P. Mouritz and A. G. Gibson, “Flame retardant composites,” in Fire Properties of Polymer Composite Materials, vol. 143 of Solid Mechanics and Its Applications, pp. 237–286, Springer, Dordrecht, The Netherlands, 2006. View at Publisher · View at Google Scholar
  14. O. Obakponovwe and J. G. Williams, “Temperature effects on the fatigue of highly filled PMMA,” Journal of Materials Science, vol. 41, no. 2, pp. 437–443, 2006. View at Publisher · View at Google Scholar · View at Scopus
  15. I. M. Joni, T. Nishiwaki, K. Okuyama, S. Isoi, and R. Kuribayashi, “Enhancement of the thermal stability and mechanical properties of a PMMA/aluminum trihydroxide composite synthesized via bead milling,” Powder Technology, vol. 204, no. 1, pp. 145–153, 2010. View at Publisher · View at Google Scholar · View at Scopus
  16. E. P. Plueddemann, Silane Coupling Agents, Plenum Press, New York, NY, USA, 1991.
  17. V. Jivkov, R. Simeonova, A. Marinova, and G. Gradesva, “Study on the gluing abilities of solid surface composites with different wood based materials and foam PVC,” in Proceedings of the 24th International Scientific Conference, pp. 49–55, Zagreb, Croatia, 2013.
  18. E. Šušteršič, M. Tušar, and A. Zupančič Valant, “Rheological and mechanical characterization of waste PMMA/ATH modified bitumen,” Construction and Building Materials, vol. 38, pp. 119–125, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. W. Kaminsky, M. Predel, and A. Sadiki, “Feedstock recycling of polymers by pyrolysis in a fluidised bed,” Polymer Degradation and Stability, vol. 85, no. 3, pp. 1045–1050, 2004. View at Publisher · View at Google Scholar · View at Scopus
  20. M. C. Sunny and C. P. Sharma, “Surface modification of corneal contact lens with phosphoryl choline by glow discharge,” Biomaterials, Artificial Cells, and Immobilization Biotechnology, vol. 19, no. 3, pp. 599–612, 1991. View at Google Scholar · View at Scopus
  21. K. Saito and A. Yoshikawa, “O2 plasma etch rate reduction on synchrotron radiation exposed PMMA films,” Japanese Journal of Applied Physics, vol. 26, no. 9, pp. 1428–1430, 1987. View at Publisher · View at Google Scholar · View at Scopus
  22. M. C. Coen, R. Lehmann, P. Groening, and L. Schlapbach, “Modification of the micro- and nanotopography of several polymers by plasma treatments,” Applied Surface Science, vol. 207, pp. 276–286, 2003. View at Publisher · View at Google Scholar · View at Scopus
  23. A. Fridman, S. Nester, L. A. Kennedy, A. Saveliev, and O. Mutaf-Yardimci, “Gliding arc gas discharge,” Progress in Energy and Combustion Science, vol. 25, no. 2, pp. 211–231, 1999. View at Publisher · View at Google Scholar · View at Scopus
  24. U. Kogelschatz, “Dielectric-barrier discharges: their history, discharge physics, and industrial applications,” Plasma Chemistry and Plasma Processing, vol. 23, no. 1, pp. 1–46, 2003. View at Publisher · View at Google Scholar · View at Scopus
  25. R. Wang, C. Zhang, X. Liu, Q. Xie, P. Yan, and T. Shao, “Microsecond pulse driven Ar/CF4 plasma jet for polymethylmethacrylate surface modification at atmospheric pressure,” Applied Surface Science, vol. 328, pp. 509–515, 2015. View at Publisher · View at Google Scholar · View at Scopus
  26. G. Oberbossel, A. T. Güntner, L. Kündig, C. Roth, and P. R. von Rohr, “Polymer powder treatment in atmospheric pressure plasma circulating fluidized bed reactor,” Plasma Processes and Polymers, vol. 12, no. 3, pp. 285–292, 2015. View at Publisher · View at Google Scholar
  27. D. K. Owens and R. C. Wendt, “Estimation of the surface free energy of polymers,” Journal of Applied Polymer Science, vol. 13, no. 8, pp. 1741–1747, 1969. View at Publisher · View at Google Scholar · View at Scopus
  28. R. M. Nussbaum, “Natural surface inactivation of Scots pine and Norway spruce evaluated by contact angle measurements,” Holz Als Roh-und Werkstoff, vol. 57, no. 6, pp. 419–424, 1999. View at Publisher · View at Google Scholar · View at Scopus
  29. J. Brandrup, Ed., Polymer Handbook, Wiley, Hoboken, NJ, USA, 4th edition, 1999.
  30. J. Berriot, H. Montes, F. Lequeux, D. Long, and P. Sotta, “Evidence for the shift of the glass transition near the particles in silica-filled elastomers,” Macromolecules, vol. 35, no. 26, pp. 9756–9762, 2002. View at Publisher · View at Google Scholar · View at Scopus
  31. S. Cerveny, S. N. Goyanes, A. J. Marzocca, and G. H. Rubiolo, “Dynamic properties in aluminum filled PMMA,” Polymer, vol. 40, no. 6, pp. 1495–1500, 1999. View at Publisher · View at Google Scholar · View at Scopus
  32. G. Beamson and D. Briggs, High Resolution XPS of Organic Polymers. The Scienta ESCA300 Database, Wiley, Chichester, UK, 1992.
  33. J. T. Kloprogge, L. V. Duong, B. J. Wood, and R. L. Frost, “XPS study of the major minerals in bauxite: gibbsite, bayerite and (pseudo-)boehmite,” Journal of Colloid and Interface Science, vol. 296, no. 2, pp. 572–576, 2006. View at Publisher · View at Google Scholar · View at Scopus
  34. M. J. Forrest, Analysis of Plastics, Smithers Rapra, Shrewsbury, UK, 2002.
  35. M. Kuzuya, A. Noguchi, M. Ishikawa et al., “Electron spin resonance study of free-radical formation and its decay of plasma-irradiated poly(methacrylic acid) and its esters,” Journal of Physical Chemistry, vol. 95, no. 6, pp. 2398–2403, 1991. View at Google Scholar · View at Scopus
  36. A. Wolkenhauer, G. Avramidis, E. Hauswald, H. Militz, and W. Viöl, “Sanding vs. plasma treatment of aged wood: a comparison with respect to surface energy,” International Journal of Adhesion and Adhesives, vol. 29, no. 1, pp. 18–22, 2009. View at Publisher · View at Google Scholar · View at Scopus
  37. T. B. Casserly and K. K. Gleason, “Effect of substrate temperature on the plasma polymerization of poly(methyl methacrylate),” Chemical Vapor Deposition, vol. 12, no. 1, pp. 59–66, 2006. View at Publisher · View at Google Scholar · View at Scopus