Table of Contents Author Guidelines Submit a Manuscript
Advances in Condensed Matter Physics
Volume 2017 (2017), Article ID 7820676, 8 pages
https://doi.org/10.1155/2017/7820676
Research Article

Fast Switching 4H-SiC P-i-n Structures Fabricated by Low Temperature Diffusion of Al

Physical-Technical Institute, Scientific Association “Physics-Sun”, Uzbek Academy of Sciences, Bodomzor Street 2B, 100084 Tashkent, Uzbekistan

Correspondence should be addressed to Kh. N. Juraev

Received 12 January 2017; Revised 30 March 2017; Accepted 3 May 2017; Published 30 May 2017

Academic Editor: Jörg Fink

Copyright © 2017 I. G. Atabaev et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. A. Lebedev, N. S. Savkina, A. M. Ivanov, N. B. Strokan, and D. V. Davydov, “6H-SiC epilayers as nuclear particle detectors,” Semiconductors, vol. 34, no. 2, pp. 243–249, 2000. View at Publisher · View at Google Scholar · View at Scopus
  2. N. I. Kuznetsov and J. A. Edmond, “Effect of deep levels on current excitation in 6H-SiC diodes,” Semiconductors, vol. 31, no. 10, pp. 1049–1052, 1997. View at Publisher · View at Google Scholar · View at Scopus
  3. J. Rogowski and A. Kubiak, “Effects of annealing temperature on the structure and electrical properties of tungsten contacts to n-type silicon carbide,” Materials Science and Engineering B: Solid-State Materials for Advanced Technology, vol. 191, no. C, pp. 57–65, 2015. View at Publisher · View at Google Scholar · View at Scopus
  4. P. G. Neudeck and C. Fazi, “Nanosecond risetime pulse characterization of SiC p+n junction diode breakdown and switching properties,” Materials Science Forum, vol. 264-268, no. 2, pp. 1037–1040, 1998. View at Publisher · View at Google Scholar · View at Scopus
  5. Y. Gao, S. Soloviev, and T. Sudarshan, “Planar 4H- and 6H-SiC p–n diodes fabricated by selective diffusion of boron,” Solid-State Electronics, vol. 45, no. 12, pp. 1987–1990, 2001. View at Publisher · View at Google Scholar
  6. S. Soloviev, Y. Gao, X. Wang, and T. Sudarshan, “Boron diffusion into 6H-SiC through graphite mask,” Journal of Electronic Materials, vol. 30, no. 3, pp. 224–227, 2001. View at Publisher · View at Google Scholar · View at Scopus
  7. P.-A. Nilsson, Method for Producing a Pn-Junction for a Semiconductor Device of SiC, US Patent, 2000.
  8. R. V. Ryzhuk, N. I. Kargin, V. A. Gudkov, A. S. Gusev, and S. M. Ryndja, “Method to make high voltage silicon-carbide diode based on ion-doped p-n-structures,” RU Patent, Article ID 2528554, 2014. View at Google Scholar
  9. P. A. Ivanov, M. E. Levinshtein, T. T. Mnatsakanov, J. W. Palmour, and A. K. Agarwal, “Power bipolar devices based on silicon carbide,” Semiconductors, vol. 39, no. 8, pp. 861–877, 2005. View at Publisher · View at Google Scholar · View at Scopus
  10. E. V. Kalinina, V. G. Kossov, R. R. Yafaev, A. M. Strelchuk, and G. N. Violina, “A high-temperature radiation-resistant rectifier based on p+-n junctions in 4H-SiC ion-implanted with aluminum,” Semiconductors, vol. 44, no. 6, pp. 778–788, 2010. View at Publisher · View at Google Scholar · View at Scopus
  11. J. Pernot, J. Camassel, S. Contreras et al., “Control of Al-implantation doping in 4H-SiC,” Materials Science and Engineering B: Solid-State Materials for Advanced Technology, vol. 80, no. 1–3, pp. 362–365, 2001. View at Publisher · View at Google Scholar · View at Scopus
  12. M. G. Mynbaeva, E. N. Mokhov, A. A. Lavrent'ev, and K. D. Mynbaev, “High-temperature diffusion doping of porous silicon carbide,” Technical Physics Letters, vol. 34, no. 9, pp. 731–733, 2008. View at Publisher · View at Google Scholar · View at Scopus
  13. Y. Gao, S. I. Soloviev, and T. S. Sudarshan, “Selective doping of 4H-SiC by codiffusion of aluminum and boron,” Applied Physics Letters, vol. 83, pp. 905–907, 2003. View at Publisher · View at Google Scholar
  14. A. Kubiak and J. Rogowski, “Boron and aluminum diffusion into 4H–SiC substrates,” Materials Science and Engineering: B, vol. 176, no. 4, pp. 297–300, 2011. View at Publisher · View at Google Scholar
  15. W. E. Doherty and R. D. Joos, The pin diode circuit designers handbook, Microsemi Corporation, Watertown MA, 1998.
  16. I. G. Atabaev, V. A. Pak, B. G. Atabaev, and Kh. N. Juraev, “Etching of SiC in Potassium Hydroxide Solution (KOH), stimulate by UV Radiation,” Uzbek Journal of Physics, vol. 13, no. 2, pp. 137–139, 2011. View at Google Scholar
  17. I. G. Atabaev, T. M. Saliev, D. Saidov et al., “Influence of defects on low temperature diffusion of boron in SiC,” Materials Sciences and Applications, vol. 02, no. 09, pp. 1205–1211, 2011. View at Publisher · View at Google Scholar
  18. I. G. Atabaev, T. M. Saliev, and E. N. Bakhranov, “Method of Diffusion of Boron in Silicon Carbide , UZ Patent,” IAP 02792, 2006. View at Google Scholar
  19. C. C. Tin, A. V. Adedeji, I. G. Atabayev et al., Low temperature impurity doping of silicon carbide, US Patent, 2011.
  20. I. G. Atabaev, T. M. Saliev, E. N. Bakhranov et al., “Nonequilibrium diffusion of boron in SiC at low temperatures,” Materials Sciences and Applications, vol. 01, no. 02, pp. 53–58, 2010. View at Publisher · View at Google Scholar
  21. I. G. Atabaev, C. C. Tin, B. G. Atabaev et al., “Diffusion and electroluminescence studies of low temperature diffusion of boron in 3C-SiC,” Materials Science Forum, vol. 600-603, pp. 457–460, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. C.-C. Tin, S. Mendis, M. T. Tin, T. I. Smith, and J. R. Williams, “A new approach in impurity doping of 4H-SiC using silicidation,” Journal of Applied Physics, vol. 114, no. 24, Article ID 244502, 2013. View at Publisher · View at Google Scholar · View at Scopus
  23. C. C. Tin, S. Mendis, K. Chew et al., “Oxide film assisted dopant diffusion in silicon carbide,” Thin Solid Films, vol. 518, no. 24, pp. 118–120, 2010. View at Publisher · View at Google Scholar · View at Scopus
  24. S. Mendis, C. C. Tin, I. G. Atabaev, and B. G. Atabaev, “The Method of Solid State Impurity Diffusion and Doping In 4H-SiC,” International Journal of Fundamental Physical Sciences, vol. 3, pp. 75–78, 2013. View at Publisher · View at Google Scholar
  25. S. P. Mendis and C. C. Tin, “Phosphorus oxide assisted n-type dopant diffusion in 4H-Silicon Carbide,” Materials Research Society Symposium Proceedings, vol. 1246, pp. B07–B12, 2010. View at Publisher · View at Google Scholar
  26. I. G. Atabaev, T. M. Saliev, B. G. Atabaev, and R. Jabbarganov, ““Negative secondary ion mass spectra under Cs+ ion bombardment of the p-SiC-B-surface,” Journal of Surface Investigation. X-ray, Synchrotron and Neutron Techniques, vol. 5, no. 4, pp. 796–800, 2011. View at Publisher · View at Google Scholar · View at Scopus
  27. D. K. Schroder, Semiconductor Material and Device Characterization, John Wiley & Sons, Inc., New York, NY, USA, 3rd edition, 2006.
  28. S. M. Sze, Physics of Semiconductor Devices, Wiley, New York, NY, USA, 2nd edition, 1981.
  29. J. D. Irwin, The Industrial Electronics Handbook, CRC Press, 2nd edition, 2011.
  30. K. Nakayama, R. Ishii, K. Asano, T. Miyazawa, M. Ito, and H. Tsuchida, “Component technologies for ultra-high-voltage 4H-SiC pin diode,” Materials Science Forum, vol. 679-680, pp. 535–538, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. V. D'Alessandro, A. Irace, G. Breglio et al., “Influence of layout geometries on the behavior of 4H-SiC 600V Merged PiN Schottky (MPS) rectifiers,” in Proceedings of 18th International Symposium on Power Semiconductor Devices and ICs, ISPSD'06, pp. 1–4, Naples, Italy, 2006. View at Scopus
  32. Q. Wahab, A. Ellison, A. Henry et al., “Influence of epitaxial growth and substrate-induced defects on the breakdown of 4H-SiC Schottky diodes,” Applied Physics Letters, vol. 76, no. 19, pp. 2725–2727, 2000. View at Publisher · View at Google Scholar · View at Scopus
  33. Cree Inc., “Cree Expands Product Offering with Very Low Basal Plane Dislocation 4H Silicon Carbide Epitaxial Wafers, (04 Sep 2012)”.
  34. F. Henry, P. Marti, Y. Casaux, C. Combescure, A. Figueras et al., “LPCVD of SiC layers in a hot-wall reactor using TMS precursor,” Journal de Physique IV Colloque, vol. 3, pp. 329–336, 1993. View at Publisher · View at Google Scholar
  35. T. T. Mnatsakanov, L. I. Pomortseva, and S. N. Yurkov, “A semiempirical model in analyzing the charge carrier mobility dependence on temperature and doping in silicon carbide,” Semiconductors, vol. 35, no. 4, pp. 394–397, 2001. View at Publisher · View at Google Scholar · View at Scopus
  36. Toshiba, SiC Schottky Barrier Diodes, (Semiconductor Catalog, Sep 2014), http://toshiba.semicon-storage.com.
  37. K. Nakayama, S. Ogata, T. Hayashi et al., “High voltage and fast switching reverse recovery characteristics of 4H-SiC PiN diode,” Materials Science Forum, vol. 778-780, pp. 841–844, 2014. View at Publisher · View at Google Scholar · View at Scopus
  38. T. Kimoto, “Material science and device physics in SiC technology for high-voltage power devices,” Japanese Journal of Applied Physics, vol. 54, no. 4, article 040103, 2015. View at Publisher · View at Google Scholar
  39. M. Bakowski, “Roadmap for SiC power devices,” Journal of Telecommunications and Information Technology, vol. 3-4, pp. 19–30, 2000. View at Google Scholar