Table of Contents Author Guidelines Submit a Manuscript
Advances in OptoElectronics
Volume 2011 (2011), Article ID 197549, 14 pages
Review Article

From Spheric to Aspheric Solid Polymer Lenses: A Review

1Institute of Mechanical and Electrical Engineering, Ming Chi University of Technology, Taipei 24301, Taiwan
2iVIEW SBU/CIS-Pixel, Novatek Microelectronics Corporation, Hsinchu 300, Taiwan
3Engineering and System Science Deptartment, NanoEngineering and MicroSystems Institute, National Tsing Hua University, Hsinchu 30013, Taiwan
4Division of Mechanics, Research Center for Applied Sciences, Academia Sinica, Taipei 115, Taiwan

Received 9 May 2011; Accepted 27 June 2011

Academic Editor: Eric Pei Yu Chiou

Copyright © 2011 Kuo-Yung Hung et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

How to Cite this Article

Kuo-Yung Hung, Po-Jen Hsiao, Fang-Gang Tseng, and Miao-Chin Wei, “From Spheric to Aspheric Solid Polymer Lenses: A Review,” Advances in OptoElectronics, vol. 2011, Article ID 197549, 14 pages, 2011. doi:10.1155/2011/197549