Table of Contents Author Guidelines Submit a Manuscript
ElectroComponent Science and Technology
Volume 2, Issue 1, Pages 33-44
http://dx.doi.org/10.1155/APEC.2.33

The Tunnel Etching of Aluminium

Allen Clark Research Centre, The Plessey Company Limited, Caswell, Towcester, Northants, UK

Received 3 April 1974

Copyright © 1975 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [23 citations]

The following is the list of published articles that have cited the current article.

  • Kowalczyk, and Flis, “Effect of sulphate anions on tunnel etching of aluminium,” Journal of Applied Electrochemistry, vol. 25, no. 5, pp. 501–507, 1955. View at Publisher · View at Google Scholar
  • Sethi, and Jackson, “The Use of the 1 Mev Electron Microscope to Study Anodic Oxide Films Formed in the Tunnels of Etched Aluminium Foil,” ElectroComponent Science and Technology, vol. 2, no. 3, pp. 209–211, 1975. View at Publisher · View at Google Scholar
  • N.F. Jackson, and D.S. Campbell, “Thin films in electrolytic capacitors,” Thin Solid Films, vol. 36, no. 2, pp. 331–341, 1976. View at Publisher · View at Google Scholar
  • B. N. Stirrup, and N. A. Hampson, “Pit propagation in aluminium under anodic polarization in aqueous chloride electrolyte,” Journal of Applied Electrochemistry, vol. 7, no. 1, pp. 91–92, 1977. View at Publisher · View at Google Scholar
  • Christopher K. Dyer, Robert S. Alwitt, and Christopher K. Dyer, “Surface Changes During A.C. Etching of Aluminum,” Journal of the Electrochemical Society, vol. 128, no. 2, pp. 300–305, 1981. View at Publisher · View at Google Scholar
  • H. Fickelscher, “Elektrolytische Tunnelätzung von Aluminiumfolie,” Materials and Corrosion/Werkstoffe und Korrosion, vol. 33, no. 3, pp. 146–150, 1982. View at Publisher · View at Google Scholar
  • Alwitt, “Electrochemical Tunnel Etching of Aluminum,” Journal of the Electrochemical Society, vol. 131, no. 1, pp. 13–17, 1984. View at Publisher · View at Google Scholar
  • Eiji Makino, Takao Yajima, and Eiichi Suganuma, “Pit Growth During Tunnel Etching of Aluminum Foil for Electrolytic Capacitors,” Journal of the Japan Society for Precision Engineering, vol. 55, no. 9, pp. 1633–1638, 1989. View at Publisher · View at Google Scholar
  • Atsushi Hibino, and Yoshiaki Watanabe, “The effect of sulfuric acid on tunnel etching of aluminum in hydrochloric acid,” Journal of Japan Institute of Light Metals, vol. 42, no. 8, pp. 440–445, 1992. View at Publisher · View at Google Scholar
  • Atsushi Hibino, Masazumi Okido, and Takeo Oki, “Generation of pit and interfacial impedance characteristics of aluminum foil for electrolytic capacitor in an acid solution,” Journal of Japan Institute of Light Metals, vol. 44, no. 5, pp. 298–304, 1994. View at Publisher · View at Google Scholar
  • Thompson, Skeldon, Wood, Shimizu, and Ashitaka, “Behavior of copper and lead during heat-treatment and surface treatment of aluminium capacitor foils,” Journal of the Electrochemical Society, vol. 146, no. 4, pp. 1380–1385, 1999. View at Publisher · View at Google Scholar
  • Skeldon, Shimizu, Ashitaka, Thompson, and Habazaki, “Behaviour of bismuth during simulated processing of model aluminium capacitor foils,” Journal of Materials Science, vol. 36, no. 9, pp. 2237–2243, 2001. View at Publisher · View at Google Scholar
  • Jh Seo, Sk Kim, Jh Jeong, Dn Lee, and Jh Ryu, “The effect of aluminum ions on the DC etching of aluminum foil,” Journal Of Applied Electrochemistry, vol. 34, no. 9, pp. 879–884, 2004. View at Publisher · View at Google Scholar
  • Kazuyuki Nishio, Kenji Kanezawa, and Hideki Masuda, “Control of anisotropic tunnel etching of Al by indentation,” Chemistry Letters, vol. 35, no. 10, pp. 1096–1097, 2006. View at Publisher · View at Google Scholar
  • Kazuyuki Nishio, Kenji Kanezawa, and Hideki Masuda, “Control of Anisotropic Tunnel Etching of Al by Indentation,” Chemistry Letters, vol. 35, no. 10, pp. 1096–1097, 2006. View at Publisher · View at Google Scholar
  • Kazuyuki Nishio, Tatsuro Fukushima, Akifumi Takeda, and Hideki Masuda, “Fabrication of site-controlled tunnel pits with high aspect ratios by Electrochemical etching of Al using masking film,” Electrochemical And Solid State Letters, vol. 10, no. 10, pp. C60–C62, 2007. View at Publisher · View at Google Scholar
  • V.A. Marichev, “Kinetics of chloride ion adsorption on stainless alloys by in situ contact electric resistance technique,” Electrochimica Acta, vol. 53, no. 22, pp. 6304–6316, 2008. View at Publisher · View at Google Scholar
  • Ren-gui Xiao, Kang-ping Yan, Ji-xin Yan, and Jian-zhong Wang, “Electrochemical etching model in aluminum foil for capacitor,” Corrosion Science, vol. 50, no. 6, pp. 1576–1583, 2008. View at Publisher · View at Google Scholar
  • Joo-Hee Jang, Woo-Sung Choi, Chang-Hyoung Lee, Geun-Hee Jeong, Nam-Jeong Kim, Chang-Lim Yu, Chan Park, and Su-Jeong Suh, “Fabrication and characterization of a thin film capacitor using Al anodizing and Ni electroless plating,” Scripta Materialia, vol. 63, no. 3, pp. 269–272, 2010. View at Publisher · View at Google Scholar
  • M. D'Alessandria, and F. Muecklich, “Tailoring the chemical behavior of aluminum for selective etching by laser interference metallurgy,” Applied Physics A-Materials Science & Processing, vol. 98, no. 2, pp. 311–320, 2010. View at Publisher · View at Google Scholar
  • Joo-Hee Jang, Chang-Hyoung Lee, Woo-Sung Choi, Nam-Jeong Kim, Taek-You Kim, Tae-Yoo Kim, Jang-Hyun Kim, Chan Park, and Su-Jeong Suh, “Ni full-filling into Al2O3/Al film with etched tunnels using a polyethylene glycol solution bath in electroless-plating,” Journal Of Vacuum Science & Technology B, vol. 28, no. 6, pp. 1231–1234, 2010. View at Publisher · View at Google Scholar
  • G. Scaduto, M. Santamaria, P. Bocchetta, and F. Di Quarto, “The effect of hydration layers on the anodic growth and on the dielectric properties of Al2O3 for electrolytic capacitors,” Thin Solid Films, 2013. View at Publisher · View at Google Scholar
  • H. Terryn, J. Vereecken, and G. E. Thompson, “AC electrograining of aluminium,” Transactions of the IMF, vol. 66, no. 1, pp. 116–121, 2017. View at Publisher · View at Google Scholar