Active and Passive Electronic Components

Active and Passive Electronic Components / 1990 / Article

Open Access

Volume 14 |Article ID 036026 | https://doi.org/10.1155/1990/36026

J. N. Avaritsiotis, "Thick Film Circuit Layout and Extraction of Parameters Using The Magic Layout Editor", Active and Passive Electronic Components, vol. 14, Article ID 036026, 14 pages, 1990. https://doi.org/10.1155/1990/36026

Thick Film Circuit Layout and Extraction of Parameters Using The Magic Layout Editor

Abstract

A Technology file for the Magic layout editor has been developed in order to enable thick film circuit designers to evolve fast solutions for layout with design rule checking, and plotting of the masks of multilayer hybrid circuits. The hybrid design system developed provides for device placement, and automatic routing techniques, in thick film circuits. Device placement is done by recalling from the library the pad pattern that corresponds to the device to be positioned. Automatic routing is implemented not only in multilayered circuits but also in single-layer technology (i.e. two possible types of metal routed on the bare substrate) where dielectric tiles are automatically created at metal crossings, when an electric contact is not desired.

Copyright © 1990 Hindawi Publishing Corporation. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


More related articles

 PDF Download Citation Citation
 Order printed copiesOrder
Views122
Downloads526
Citations

Article of the Year Award: Outstanding research contributions of 2020, as selected by our Chief Editors. Read the winning articles.