Table of Contents Author Guidelines Submit a Manuscript
Advances in Polymer Technology
Volume 2019, Article ID 1267692, 10 pages
Research Article

The Investigations of Thermomechanical Properties of Polypropylene Composites

1Czestochowa University of Technology, Department of Polymer Processing, Al. Armii Krajowej 19c, 42-201 Czestochowa, Poland
2Polimarky Sp. z o. o. Sp. K. ul. Bieszczadzka 10 a, 35-082 Rzeszów, Poland

Correspondence should be addressed to Paweł Palutkiewicz; lp.zcp.ppi@zciweiktulap

Received 25 October 2018; Revised 4 February 2019; Accepted 24 March 2019; Published 17 April 2019

Academic Editor: Leonard D. Tijing

Copyright © 2019 Sylwester Norwiński et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.


The article presents the results of the investigations of isotactic polypropylene composites with the following fillers: flame retardants, glass fiber, glass beads, and talc. The process of preparing composites and test samples is described. The investigations were performed using the DMTA method. The evaluation of thermal effects for the investigated molded parts using special device was also presented. The scope of the research included ten polypropylene composites with different content and type of fillers. These measurements allowed us to determine the influence of the filler type and content on the dynamic mechanical properties of iPP composites. The results will be useful for determining the scope of application of the mentioned materials in various fields of industry in the future.