Research Article
Carbon Nanotube Layer for Reduction of Fiber Print-Through in Carbon Fiber Composites
Table 4
2D parameters of waviness measurement of materials
.
| Composite designation | | | | - | Measurement (nm) | Reduction (%) | Measurement (nm) | Reduction (%) | Measurement (nm) | Reduction (%) | Measurement (nm) | Reduction (%) |
| IM7 | 3488 | X | 3530 | X | 5848 | X | 2318 | X | IM7/LY556 | 1523 | 56 | 1520 | 57 | 2460 | 58 | 940 | 59% | IM7/1T | 1726 | 51 | 1106 | 69 | 2209 | 62 | 1103 | 52% | IM7/1A | 1921 | 45 | 1501 | 57 | 2240 | 62 | 739 | 68% | IM7/1TD | 1504 | 57 | 913 | 74 | 1704 | 71 | 791 | 66% | IM7/1AP | 948 | 73 | 555 | 84 | 962 | 84 | 407 | 82% | IM7/1AP(4)-3R | 469 | 87 | 416 | 88 | 669 | 89 | 253 | 89% | IM7/1AP-3R | 884 | 75 | 708 | 80 | 1576 | 73 | 868 | 63% | IM7/2AP-3R | 696 | 80 | 682 | 81 | 1145 | 80 | 463 | 80% |
|
|
Results represent the average of values for both directions studied. The percentage of reduction is relative to IM7 composite. |