Multiobjective Optimization Method for Polymer Injection Molding Based on a Genetic Algorithm

<table class="fixed-width table-group" id="tab1"><tr><td><table class="table"><colgroup><col style="width:16.49em"/><col style="width:4.88em"/></colgroup><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr class="thead"><td class="align_left">Material properties</td><td class="align_center">Value</td></tr><tr><td class="thead-hr" colspan="2"><hr/></td></tr><tr><td class="align_left">Solid density(g/cm3)</td><td class="align_center">1.0866</td></tr><tr><td class="align_left">Melt density(g/cm3)</td><td class="align_center">0.90867</td></tr><tr><td class="align_left">Recommended mold temperature(°C)</td><td class="align_center">30</td></tr><tr><td class="align_left">Recommended melt temperature(°C)</td><td class="align_center">230</td></tr><tr><td class="align_left">Fibers/filler(talc-filled)</td><td class="align_center">20% Talc</td></tr><tr><td class="align_left">Material characteristics</td><td class="align_center">PP</td></tr><tr><td class="align_left">Elastic modulus(MPa)</td><td class="align_center">2200</td></tr><tr><td class="align_left">Shear modulus(MPa)</td><td class="align_center">2270</td></tr><tr><td class="align_left">Poisson’s ratio</td><td class="align_center">0.39</td></tr><tr class="table-tr"><td colspan="2"><hr class="tbody-hr"/></td></tr></table></td></tr></table>

<div>Material properties of TK-PP1.</div>

Advances in Polymer Technology

tab1

Table 1

Table 1: Multiobjective Optimization Method for Polymer Injection Molding Based on a Genetic Algorithm 