Multiobjective Optimization Method for Polymer Injection Molding Based on a Genetic Algorithm

Table 4

Fuzzy mapping of the orthogonal results.

No.	Sink mark	Warpage	Sum
1	0.1614	0.5265	0.6879
2	0.0316	0.3129	0.3445
3	0.0000	0.2185	0.2185
4	0.2982	0.8675	1.1658
5	0.3158	0.3121	0.6279
6	1.0000	0.7939	1.7939
7	0.3368	0.6722	1.0090
8	0.3579	0.1987	0.5566
9	0.4456	0.1945	0.6402
10	0.6070	0.5066	1.1136
11	0.5158	0.0000	0.5158
12	0.2877	0.6531	0.9409
13	0.6456	0.3046	0.9502
14	0.5263	0.3998	0.9262
15	0.5789	0.1440	0.7230
16	0.8702	1.0000	1.8702