Research Article
Experimental-Based Optimization of Injection Molding Process Parameters for Short Product Cycle Time
Table 2
Lower and upper bounds for the test variables (bound for both the DOE and optimization).
| Test variables | Units | Lower bound | Upper bound |
| Injection speed | mm/sec | 15 | 60 | Injection pressure | bar | 450 | 800 | Cooling time | sec | 10 | 30 | Packing pressure | bar | 100 | 400 | Mold temperature | °C | 15 | 45 | Packing time | sec | 3 | 9 | Melt temperature | °C | 200 | 250 |
|
|