Study of Residual Wall Thickness and Multiobjective Optimization for Process Parameters of Water-Assisted Injection Molding

Table 1

DOE of Opt LHS.

Sample	(%)	(K)	(MPa)	(s)	(K)	(%)	(%)
1	61.9	593.0	8.5	2.3	318.7	55.9	27.9
2	66.1	578.7	10.0	2.9	332.1	55.3	23.3
3	67.6	574.0	7.9	2.5	351.1	52.4	26.1
4	61.1	576.3	7.5	0.0	330.1	55.8	26.6
5	65.7	552.5	6.4	3.2	334.0	49.2	26.5
6	60.8	571.6	6.2	2.7	322.5	52.0	26.7
7	63.1	590.6	9.1	1.3	349.2	56.9	32.3
8	63.8	569.2	9.8	0.8	314.9	56.1	28.7
9	65.3	564.4	6.8	1.0	313.0	50.0	27.6
10	64.2	547.8	9.2	3.1	347.3	54.7	22.6
11	66.5	554.9	6.6	0.4	341.6	48.6	33.0
12	67.2	585.9	8.3	0.6	328.2	54.7	25.8
13	62.3	543.0	8.1	1.1	326.3	53.3	25.8
14	65.0	559.7	9.4	0.2	345.4	54.9	20.8
15	61.5	562.1	7.0	1.7	353.0	52.8	24.5
16	60.0	566.8	9.6	2.1	335.9	58.3	23.0
17	64.6	588.2	6.0	1.5	339.7	57.9	21.2
18	66.9	583.5	7.1	3.4	320.6	50.7	20.5
19	60.4	545.4	7.3	3.8	337.8	55.9	26.3
20	68.0	550.1	8.9	1.9	324.4	52.8	21.7
21	63.4	557.3	8.7	3.6	316.8	55.8	18.8
22	62.7	581.1	7.7	4.0	343.5	51.7	18.7