Numerical Simulation on the Penetration Behavior of the Projectile during the Water Injection Stage of Water-Projectile-Assisted Injection Molding Process

<div>Comparison of the velocity distribution near the penetration front at the middle location of straight segments between WAIM and W-PAIM: (a) velocity magnitude contour of WAIM, (b) velocity magnitude contour of W-PAIM, (c) velocity profiles at position I, (d) velocity profiles at position II, (e) velocity profiles at position III (I denotes the location of 0.04 mm, II is 0.05 mm, and III is 0.06 mm).</div>

Advances in Polymer Technology

fig6

Figure 6

Figure 6: Numerical Simulation on the Penetration Behavior of the Projectile during the Water Injection Stage of Water-Projectile-Assisted Injection Molding Process 

Figure 6 | Numerical Simulation on the Penetration Behavior of the Projectile during the Water Injection Stage of Water-Projectile-Assisted Injection Molding Process 