Fiber Orientation Analysis of Overflow Water-Assisted Injection Molding with Short Glass Fiber Reinforced Polypropylene

<table class="table-group" id="tab2"><tr><td><table class="table"><tr><td class="thead-hr" colspan="3"><hr/></td></tr><tr class="thead"><td class="align_left">Water injection delay time (s)</td><td class="align_center">Water injection pressure (MPa)</td><td class="align_center">Melt temperature (°C)</td></tr><tr><td class="thead-hr" colspan="3"><hr/></td></tr><tr><td class="align_left">0</td><td class="align_center">4</td><td class="align_center">210</td></tr><tr><td class="align_left"><b>1</b></td><td class="align_center">6</td><td class="align_center"><b>230</b></td></tr><tr><td class="align_left">3</td><td class="align_center"><b>8</b></td><td class="align_center">250</td></tr><tr><td class="align_left">5</td><td class="align_center">10</td><td class="align_center">270</td></tr><tr class="table-tr"><td colspan="3"><hr class="tbody-hr"/></td></tr></table></td></tr><tr class="table-fn"><td><div>Note: The bold fonts in the table are the basic parameters to investigate melt temperature, water injection delay time, and water injection pressure.<br/></div></td></tr></table>

Advances in Polymer Technology

tab2

Table 2

Table 2: Fiber Orientation Analysis of Overflow Water-Assisted Injection Molding with Short Glass Fiber Reinforced Polypropylene 