Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2014, Article ID 929786, 9 pages
http://dx.doi.org/10.1155/2014/929786
Research Article

Amino-Functionalization of Carbon Nanotubes by Using a Factorial Design: Human Cardiac Troponin T Immunosensing Application

Biomedical Engineering Laboratory, Federal University of Pernambuco, Avenida Professor Moraes Rego 1235, 50670-901 Recife, PE, Brazil

Received 25 February 2014; Revised 4 May 2014; Accepted 17 June 2014; Published 13 July 2014

Academic Editor: Pablo Avanzas

Copyright © 2014 Tatianny A. Freitas et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. M. Li, Y. T. Li, D. W. Li, and Y. T. Long, “Recent developments and applications of screen-printed electrodes in environmental assays—a review,” Analytica Chimica Acta, vol. 734, pp. 31–44, 2012. View at Google Scholar
  2. N. Serrano, J. M. Díaz-Cruz, C. Ariño, and M. Esteban, “Ex situ deposited bismuth bilm on screen-printed carbon electrode: a disposable device for stripping voltammetry of heavy metal ions,” Electroanalysis, vol. 22, no. 13, pp. 1460–1467, 2010. View at Google Scholar
  3. M. Díaz -González, D. Hernández-Santos, M. B. González-García, and A. Costa-García, “Development an immunosensor the determination rabbit IgG using streptavidin modified screen-printed carbon electrodes,” Talanta, vol. 65, no. 2, pp. 565–573, 2005. View at Publisher · View at Google Scholar
  4. P. Ekabutr, O. Chailapakul, and P. Supaphol, “Modification of disposable screen-printed carbon electrode surfaces with conductive electrospun nanofibers for biosensor applications,” Journal of Applied Polymer Science, vol. 130, no. 6, pp. 3885–3893, 2013. View at Google Scholar
  5. C. I. L. Justino, T. A. P. Rocha-Santos, and A. C. Duarte, “Advances in point-of-care technologies with biosensors based on carbon nanotubes,” TrAC Trends in Analytical Chemistry, vol. 45, pp. 24–36, 2013. View at Google Scholar
  6. I. Willner and B. Willner, “Biomolecule-based nanomaterials and nanostructures,” Nano Letters, vol. 10, no. 10, pp. 3805–3815, 2010. View at Google Scholar
  7. C. B. Jacobs, M. J. Peairs, and B. J. Venton, “Review: carbon nanotube based electrochemical sensors for biomolecules,” Analytica Chimica Acta, vol. 662, no. 2, pp. 105–127, 2010. View at Google Scholar
  8. S. K. Vashist, D. Zheng, K. Al-Rubeaan, J. H. T. Luong, and F.-S. Sheu, “Advances in carbon nanotube based electrochemical sensors for bioanalytical applications,” Biotechnology Advances, vol. 29, no. 2, pp. 169–188, 2011. View at Google Scholar
  9. C. Singh, S. Srivastava, M. A. Ali et al., “Carboxylated multiwalled carbon nanotubes based biosensor for aflatoxin detection,” Sensors and Actuators B: Chemical, vol. 185, pp. 258–264, 2013. View at Publisher · View at Google Scholar
  10. P. Peluso, D. S. Wilson, D. Do et al., “Optimizing antibody immobilization strategies for the construction of protein microarrays,” Analytical Biochemistry, vol. 312, no. 2, pp. 113–124, 2003. View at Publisher · View at Google Scholar
  11. C. Chen, A. Baeumner, and R. Durst, “Protein G-liposomal nanovesicles as universal reagents for immunoassays,” Talanta, vol. 67, no. 1, pp. 205–211, 2005. View at Google Scholar
  12. Y. Wan, Y. Su, X. Zhu, G. Liu, and C. Fan, “Development of electrochemical immunosensors towards point of care diagnostics,” Biosensors and Bioelectronics, vol. 47, pp. 1–11, 2013. View at Google Scholar
  13. P. W. Chiu, G. S. Duesberg, U. Dettlaff-Weglikowska, and S. Roth, “Interconnection of carbon nanotubes by chemical functionalization,” Applied Physics Letters, vol. 80, no. 20, pp. 3811–3813, 2002. View at Google Scholar
  14. D. E. Hill, Y. Lin, A. M. Rao, L. F. Allard, and Y.-P. Sun, “Functionalization of carbon nanotubes with polystyrene,” Macromolecules, vol. 35, no. 25, pp. 9466–9471, 2002. View at Publisher · View at Google Scholar
  15. D. Shi, J. Lian, P. He et al., “Plasma coating of carbon nanofibers for enhanced dispersion and interfacial bonding in polymer composites,” Applied Physics Letters, vol. 83, no. 25, pp. 5301–5303, 2003. View at Publisher · View at Google Scholar
  16. S. W. Kim, T. Kim, Y. S. Kim et al., “Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers,” Carbon, vol. 50, no. 1, pp. 3–33, 2012. View at Google Scholar
  17. M. R. S. Castro and H. K. Schmidt, “Preparation and characterization of low- and high-adherent transparent multi-walled carbon nanotube thin films,” Materials Chemistry and Physics, vol. 111, no. 2-3, pp. 317–321, 2008. View at Google Scholar
  18. W.-M. Chiu and Y.-A. Chang, “Chemical modification of multiwalled carbon nanotube with the liquid phase method,” Journal of Applied Polymer Science, vol. 107, no. 3, pp. 1655–1660, 2008. View at Google Scholar
  19. H. D. White and D. P. Chew, “Acute myocardial infarction,” The Lancet, vol. 372, no. 9638, pp. 570–578, 2008. View at Publisher · View at Google Scholar
  20. A. A. Mohammed and J. L. Januzzi, “Clinical applications of highly sensitive troponin assays,” Cardiology in Review, vol. 18, no. 1, pp. 12–19, 2010. View at Google Scholar
  21. F. S. Apple, A. H. B. Wu, and A. S. Jaffe, “European Society of Cardiology and American College of Cardiology guidelines for redefinition of myocardial infarction: How to use existing assays clinically and for clinical trials,” The American Heart Journal, vol. 144, no. 6, pp. 981–986, 2002. View at Publisher · View at Google Scholar
  22. B. Zhang, A. Morales, R. Peterson, L. Tang, and J. Y. Ye, “Label-free detection of cardiac Troponin I with a photonic crystal biosensor,” Biosensors and Bioelectronics, vol. 58, pp. 107–113, 2014. View at Google Scholar
  23. M. J. Guy, Y. C. Chen, L. Clinton et al., “The impact of antibody selection on the detection of cardiac troponin I,” Clinica Chimica Acta, vol. 420, pp. 82–88, 2013. View at Google Scholar
  24. J. Shen, W. Huang, L. Wu, Y. Hu, and M. Ye, “Thermo-physical properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes,” Composites A: Applied Science and Manufacturing, vol. 38, no. 5, pp. 1331–1336, 2007. View at Publisher · View at Google Scholar
  25. Z. Yang and D. Min Zhou, “Cardiac markers and their point-of-care testing for diagnosis of acute myocardial infarction,” Clinical Biochemistry, vol. 39, no. 8, pp. 771–780, 2006. View at Google Scholar
  26. A. B. Mattos, T. A. Freitas, L. T. Kubota, and R. F. Dutra, “An o-aminobenzoic acid film-based immunoelectrode for detection of the cardiac troponin T in human serum,” Biochemical Engineering Journal, vol. 71, pp. 97–104, 2013. View at Google Scholar
  27. M.-L. Sham and J.-K. Kim, “Surface functionalities of multi-wall carbon nanotubes after UV/Ozone and TETA treatments,” Carbon, vol. 44, no. 4, pp. 768–777, 2006. View at Publisher · View at Google Scholar
  28. J. Xiong, Z. Zheng, X. Qin, M. Li, H. Li, and X. Wang, “The thermal and mechanical properties of a polyurethane/multi-walled carbon nanotube composite,” Carbon, vol. 44, no. 13, pp. 2701–2707, 2006. View at Google Scholar
  29. J. Shen, W. Huang, L. Wu, Y. Hu, and M. Ye, “Thermo-physical properties of epoxy nanocomposites reinforced with amino-functionalized multi-walled carbon nanotubes,” Composites A: Apllied Science and Manufacturing, vol. 38, no. 5, pp. 1331–1336, 2007. View at Google Scholar
  30. R. O. Kadara, N. Jenkinson, and C. E. Banks, “Characterisation of commercially available electrochemical sensing platforms,” Sensors and Actuators B Chemical, vol. 138, no. 2, pp. 556–562, 2009. View at Google Scholar
  31. Z. Pei, H. Anderson, A. Myrskog, G. Dunér, B. Ingemarsson, and T. Aastrup, “Optimizing immobilization on two-dimensional carboxyl surface: pH dependence of antibody orientation and antigen binding capacity,” Analytical Biochemistry, vol. 398, no. 2, pp. 161–168, 2010. View at Publisher · View at Google Scholar
  32. R. A. Williams and H. W. Blanch, “Covalent immobilization of protein monolayers for biosensor applications,” Biosensors and Bioelectronics, vol. 9, pp. 159–167, 1994. View at Google Scholar
  33. A. Makaraviciute and A. Ramanaviciene, “Site-directed antibody immobilization techniques for immunosensors,” Biosensors and Bioelectronics, vol. 50, pp. 460–471, 2013. View at Google Scholar
  34. L. Ruiyi, X. Qianfang, L. Zaijun, S. Xiulan, and L. Junkang, “Electrochemical immunosensor for ultrasensitive detection of microcystin-LR based on graphenegold nanocomposite/functional conducting polymer/gold nanoparticle/ionic liquid composite film with electrodeposition,” Biosensors and Bioelectronics, vol. 44, no. particle, pp. 235–240, 2013. View at Google Scholar
  35. N. B. Ramírez, A. M. Salgado, and B. Valdman, “The evolution and developments of immunosensors for health and environmental monitoring: problems and perspectives,” Brazilian Journal of Chemical Engineering, vol. 26, no. 2, pp. 227–249, 2009. View at Publisher · View at Google Scholar
  36. G. L. Long and J. D. Winefordner, “Limit of detection: a closer look at the IUPAC definition,” Analytical Chemistry, vol. 55, no. 7, pp. 713A–724A, 1983. View at Google Scholar
  37. S. L. R. Gomes-Filho, A. C. M. S. Dias, M. M. S. Silva, B. V. M. Silva, and R. F. Dutra, “A carbon nanotube-based electrochemical immunosensor for cardiac troponin T,” Microchemical Jounal, vol. 109, pp. 10–15, 2013. View at Google Scholar