Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2015, Article ID 923808, 6 pages
http://dx.doi.org/10.1155/2015/923808
Research Article

Real-Time Analysis of Temperature Changes in Composite Increments and Pulp Chamber during Photopolymerization

1Department of Conservative Dentistry and Dental Research Institute, School of Dentistry, Seoul National University, Seoul 110-749, Republic of Korea
2Department of Dental Hygiene, Wonju College of Medicine, Yonsei University, Wonju 220-701, Republic of Korea
3Department of Conservative Dentistry, Seoul St. Mary’s Dental Hospital, Catholic University of Korea, Seoul 137-701, Republic of Korea
4Department of Dentistry, Inje University Seoul Paik Hospital, Seoul 411-706, Republic of Korea
5Nutrition Education Major, Graduate School of Education, Sangmyung University, Seoul 110-743, Republic of Korea

Received 28 November 2014; Accepted 31 December 2014

Academic Editor: Cem Kurtoǧlu

Copyright © 2015 Ryan Jin-Young Kim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Citations to this Article [5 citations]

The following is the list of published articles that have cited the current article.

  • Çiğdem Atalayın, Elif Yaşa, Gamze Karaçolak, Tuğrul Sarı, and Lezize Şebnem Türkün, “Farklı modlarda kullanılan ışık kaynağı ile sertleştirilen bulk-fill kompozit rezinlerin pulpa odasında oluşturduğu sıcaklık değişimlerinin değerlendirilmesi: ex vivo,” Acta Odontologica Turcica, 2016. View at Publisher · View at Google Scholar
  • MacIej Janeczek, Katarzyna Fita, Małgorzata Kowalczyk-Zając, Agnieszka Czajczyńska-Waszkiewicz, Piotr Kosior, MacIej Dobrzyński, Katarzyna Herman, Krzysztof Dudek, and Dagmara Piesiak-Pańczyszyn, “Assessment of Heat Hazard during the Polymerization of Selected Light-Sensitive Dental Materials,” BioMed Research International, vol. 2016, 2016. View at Publisher · View at Google Scholar
  • Min-Jung Kim, Ryan Jin-Young Kim, Jack Ferracane, and In-Bog Lee, “Thermographic analysis of the effect of composite type, layering method, and curing light on the temperature rise of photo-cured composites in tooth cavities,” Dental Materials, 2017. View at Publisher · View at Google Scholar
  • Elif Yasa, Cigdem Atalayin, Gamze Karacolak, Tugrul Sari, and L. Sebnem Turkun, “Intrapulpal temperature changes during curing of different bulk-fill restorative materials,” Dental Materials Journal, 2017. View at Publisher · View at Google Scholar
  • Alexandra Vinagre, João Ramos, Clara Rebelo, José Basto, Ana Messias, Nélia Alberto, and Rogério Nogueira, “Pulp Temperature Rise Induced by Light-Emitting Diode Light-Curing Units Using an Ex Vivo Model,” Materials, vol. 12, no. 3, pp. 411, 2019. View at Publisher · View at Google Scholar