Intrapulpal Thermal Changes during Setting Reaction of Glass Carbomer® Using Thermocure Lamp

Table 1

Material, manufacturer, and composition of the materials used in study.

Material	Manufacturer	Composition
Fuji II LC; (RMGIC)	GC Corporation, Tokyo, Japan	Aluminofluorosilicate glass, polyacrylic acid, 2-hydroxyethyl methacrylate, 2,2,4-trimethyl hexamethylene dicarbonate, triethylene glycol dimethacrylate
GCP Glass Fill; (GC)	GCP Dental, Vianen, Netherlands	Fill: fluoroaluminosilicate glass, apatite, polyacids; Gloss: modified polysiloxanes
Dyract AP; (RMCR)	Dentsply, Germany	Urethane dimethacrylate (UDMA), tetracarboxylic acid-hydroxyethyl methacrylate-ester (TCB resin), alkanoyl-polymethacrylate, strontium-fluorosilicate glass, strontium fluoride, photoinitiators, butylhydroxytoluene, iron oxide pigments