Research Article
Mechanical and Metallurgical Properties of Various Nickel-Titanium Rotary Instruments
Figure 6
DSC plots, heating (lower) and cooling (upper) curves are shown. (a) A sample illustration of a DSC curve. and indicate the starting and finishing points of austenitic transformation in the heat curve, respectively. and indicate the start and end points of martensitic transformation in a cooling curve, respectively. and indicate the starting and finishing points of R-phase transformation in a heating or cooling curve, respectively. (b) DSC plot of K3, (c) DSC plot of Reciproc, (d) DSC plot of HyFlex CM, and (e) DSC plot of TF.
(a) |
(b) |
(c) |
(d) |
(e) |