Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2017, Article ID 4528601, 13 pages
https://doi.org/10.1155/2017/4528601
Research Article

Mechanical and Metallurgical Properties of Various Nickel-Titanium Rotary Instruments

1White Dental Clinic, Daemyeong Bld, 87 Choonggyeong-ro, Deokyang-gu, GoYang 10529, Republic of Korea
2Department of Conservative Dentistry, Kyung Hee University Dental Hospital, 23 Kyungheedaero, Dongdaemun-gu, Seoul 02447, Republic of Korea
3Department of Conservative Dentistry, Dental Research Institute, Seoul National University Dental Hospital and Seoul Dental Hospital for Disabled, Seoul National University School of Dentistry, 101 Daehawk-Ro, Seoul 03080, Republic of Korea
4Biomedical Research Institute, Korea Institute of Science and Technology, 5 Hwarang-ro 14, Seongbuk-gu, Seoul 02792, Republic of Korea
5Future Convergence Research Division, Korea Institute of Science and Technology, 5 Hwarang-ro 14, Seongbuk-gu, Seoul 02792, Republic of Korea
6Department of Conservative Dentistry, School of Dentistry, Kyung Hee University, 23 Kyungheedaero, Dongdaemun-gu, Seoul 02447, Republic of Korea

Correspondence should be addressed to Seok Woo Chang; moc.liamg@cms7002cws

Received 30 August 2017; Revised 27 October 2017; Accepted 2 November 2017; Published 28 November 2017

Academic Editor: Hwa-Liang Leo

Copyright © 2017 Kyu-Sang Shim et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Guelzow, O. Stamm, P. Martus, and A. M. Kielbassa, “Comparative study of six rotary nickel-titanium systems and hand instrumentation for root canal preparation,” International Endodontic Journal, vol. 38, no. 10, pp. 743–752, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. S.-B. Liu, B. Fan, G. S. P. Cheung et al., “Cleaning effectiveness and shaping ability of rotary ProTaper compared with rotary GT and manual K-Flexofile,” American Journal of Dentistry, vol. 19, no. 6, pp. 353–358, 2006. View at Google Scholar · View at Scopus
  3. M. B. McGuigan, C. Louca, and H. F. Duncan, “Endodontic instrument fracture: causes and prevention,” British Dental Journal, vol. 214, no. 7, pp. 341–348, 2013. View at Publisher · View at Google Scholar · View at Scopus
  4. O. A. Peters, M. G. de Azevedo Bahia, and E. S. J. Pereira, “Contemporary root canal preparation: innovations in biomechanics,” Dental Clinics of North America, vol. 61, no. 1, pp. 37–58, 2017. View at Publisher · View at Google Scholar · View at Scopus
  5. R. Kaul, R. Farooq, V. Kaul, S. U. Khateeb, A. R. Purra, and R. Mahajan, “Comparative evaluation of physical surface changes and incidence of separation in rotary nickel-titanium instruments: An in vitro SEM study,” Iranian Endodontic Journal, vol. 9, no. 3, pp. 204–209, 2014. View at Google Scholar · View at Scopus
  6. J. Choi, S. Oh, Y.-C. Kim, K.-K. Jee, K. Kum, and S. Chang, “Fracture resistance of K3 nickel-titanium files made from different thermal treatments,” Bioinorganic Chemistry and Applications, vol. 2016, Article ID 6374721, 6 pages, 2016. View at Publisher · View at Google Scholar · View at Scopus
  7. Y. Shen, H.-M. Zhou, Y.-F. Zheng, B. Peng, and M. Haapasalo, “Current challenges and concepts of the thermomechanical treatment of nickel-titanium instruments,” Journal of Endodontics, vol. 39, no. 2, pp. 163–172, 2013. View at Publisher · View at Google Scholar · View at Scopus
  8. K. Otsuka and C. M. Wayman, Shape Memory Materials, Cambridge University Press, Cambridge, UK, 1998.
  9. E. S. J. Pereira, R. O. Gomes, A. M. F. Leroy et al., “Mechanical behavior of M-Wire and conventional NiTi wire used to manufacture rotary endodontic instruments,” Dental Materials, vol. 29, no. 12, pp. e318–e324, 2013. View at Publisher · View at Google Scholar · View at Scopus
  10. M. C. C. Melo, E. S. J. Pereira, A. C. D. Viana, A. M. A. Fonseca, V. T. L. Buono, and M. G. A. Bahia, “Dimensional characterization and mechanical behaviour of K3 rotary instruments,” International Endodontic Journal, vol. 41, no. 4, pp. 329–338, 2008. View at Publisher · View at Google Scholar · View at Scopus
  11. H.-C. Kim, S.-W. Kwak, G. S.-P. Cheung, D.-H. Ko, S.-M. Chung, and W. Lee, “Cyclic fatigue and torsional resistance of two new nickel-titanium instruments used in reciprocation motion: reciproc versus WaveOne,” Journal of Endodontics, vol. 38, no. 4, pp. 541–544, 2012. View at Publisher · View at Google Scholar · View at Scopus
  12. A. Fidler, “Kinematics of 2 reciprocating endodontic motors: the difference between actual and set values,” Journal of Endodontics, vol. 40, no. 7, pp. 990–994, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. S. B. Alapati, W. A. Brantley, M. Iijima et al., “Micro-XRD and temperature-modulated DSC investigation of nickel-titanium rotary endodontic instruments,” Dental Materials, vol. 25, no. 10, pp. 1221–1229, 2009. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Shen, H.-M. Zhou, Y.-F. Zheng, L. Campbell, B. Peng, and M. Haapasalo, “Metallurgical characterization of controlled memory wire nickel-titanium rotary instruments,” Journal of Endodontics, vol. 37, no. 11, pp. 1566–1571, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. K. Otsuka and X. Ren, “Physical metallurgy of Ti-Ni-based shape memory alloys,” Progress in Materials Science, vol. 50, no. 5, pp. 511–678, 2005. View at Publisher · View at Google Scholar · View at Scopus
  16. S. W. Chang, Y.-C. Kim, H. Chang et al., “Effect of heat treatment on cyclic fatigue resistance, thermal behavior and microstructures of K3 NiTi rotary instruments,” Acta Odontologica Scandinavica, vol. 71, no. 6, pp. 1656–1662, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. X. M. Hou, Y. Yahata, Y. Hayashi, A. Ebihara, T. Hanawa, and H. Suda, “Phase transformation behaviour and bending property of twisted nickel-titanium endodontic instruments,” International Endodontic Journal, vol. 44, no. 3, pp. 253–258, 2011. View at Publisher · View at Google Scholar · View at Scopus
  18. L. C. Braga, R. R. S. Magalhães, R. K. L. Nakagawa, C. G. Puente, V. T. L. Buono, and M. G. A. Bahia, “Physical and mechanical properties of twisted or ground nickel-titanium instruments,” International Endodontic Journal, vol. 46, no. 5, pp. 458–465, 2013. View at Publisher · View at Google Scholar · View at Scopus
  19. S. K. Wu, H. C. Lin, and T. S. Chou, “A study of electrical resistivity, internal friction and shear modulus on an aged Ti49Ni51 alloy,” Acta Metallurgica et Materialia, vol. 38, no. 1, pp. 95–102, 1990. View at Publisher · View at Google Scholar · View at Scopus
  20. E. S. J. Pereira, I. F. C. Peixoto, A. C. D. Viana et al., “Physical and mechanical properties of a thermomechanically treated NiTi wire used in the manufacture of rotary endodontic instruments,” International Endodontic Journal, vol. 45, no. 5, pp. 469–474, 2012. View at Publisher · View at Google Scholar
  21. E. Johnson, A. Lloyd, S. Kuttler, and K. Namerow, “Comparison between a novel nickel-titanium alloy and 508 nitinol on the cyclic fatigue life of ProFile 25/.04 rotary instruments,” Journal of Endodontics, vol. 34, no. 11, pp. 1406–1409, 2008. View at Publisher · View at Google Scholar · View at Scopus
  22. J. Ye and Y. Gao, “Metallurgical characterization of M-Wire nickel-titanium shape memory alloy used for endodontic rotary instruments during low-cycle fatigue,” Journal of Endodontics, vol. 38, no. 1, pp. 105–107, 2012. View at Publisher · View at Google Scholar · View at Scopus
  23. R. C. Wycoff and D. W. Berzins, “An in vitro comparison of torsional stress properties of three different rotary nickel-titanium files with a similar cross-sectional design,” Journal of Endodontics, vol. 38, no. 8, pp. 1118–1120, 2012. View at Publisher · View at Google Scholar · View at Scopus
  24. T. R. Kramkowski and J. Bahcall, “An In Vitro Comparison of Torsional Stress and Cyclic Fatigue Resistance of ProFile GT and ProFile GT Series X Rotary Nickel-Titanium Files,” Journal of Endodontics, vol. 35, no. 3, pp. 404–407, 2009. View at Publisher · View at Google Scholar · View at Scopus
  25. E. Ninan and D. W. Berzins, “Torsion and bending properties of shape memory and superelastic nickel-titanium rotary instruments,” Journal of Endodontics, vol. 39, no. 1, pp. 101–104, 2013. View at Publisher · View at Google Scholar · View at Scopus
  26. A. L. McKelvey and R. O. Ritchie, “Fatigue-crack propagation in Nitinol, a shape-memory and superelastic endovascular stent material,” Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 47, no. 3, pp. 301–308, 1999. View at Publisher · View at Google Scholar · View at Scopus
  27. T. R. Tripi, A. Bonaccorso, and G. G. Condorelli, “Cyclic fatigue of different nickel-titanium endodontic rotary instruments,” Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, vol. 102, no. 4, pp. e106–e114, 2006. View at Publisher · View at Google Scholar · View at Scopus
  28. E. Pedullà, N. M. Grande, G. Plotino, G. Gambarini, and E. Rapisarda, “Influence of continuous or reciprocating motion on cyclic fatigue resistance of 4 different nickel-titanium rotary instruments,” Journal of Endodontics, vol. 39, no. 2, pp. 258–261, 2013. View at Publisher · View at Google Scholar · View at Scopus
  29. G. De-Deus, E. J. L. Moreira, H. P. Lopes, and C. N. Elias, “Extended cyclic fatigue life of F2 ProTaper instruments used in reciprocating movement,” International Endodontic Journal, vol. 43, no. 12, pp. 1063–1068, 2010. View at Publisher · View at Google Scholar · View at Scopus
  30. N. Varghese, R. Pillai, U. Sujathen, S. Sainudeen, A. Antony, and S. Paul, “Resistance to torsional failure and cyclic fatigue resistance of ProTaper Next, WaveOne, and Mtwo files in continuous and reciprocating motion: An In Vitro Study,” Journal of Conservative Dentistry, vol. 19, no. 3, pp. 225–230, 2016. View at Publisher · View at Google Scholar
  31. A. Dagna, C. Poggio, R. Beltrami, M. Colombo, M. Chiesa, and S. Bianchi, “Cyclic fatigue resistance of OneShape, Reciproc, and WaveOne: An in vitro comparative study,” Journal of Conservative Dentistry, vol. 17, no. 3, pp. 250–254, 2014. View at Publisher · View at Google Scholar · View at Scopus
  32. R. R. S. de Magalhães, L. C. M. Braga, É. S. J. Pereira, I. F. D. C. Peixoto, V. T. L. Buono, and M. G. D. A. Bahia, “The impact of clinical use on the torsional behavior of Reciproc and WaveOne instruments,” Journal of Applied Oral Science, vol. 24, no. 4, pp. 310–316, 2016. View at Publisher · View at Google Scholar · View at Scopus