Influence of Bulk-Fill Composites, Polimerization Modes, and Remaining Dentin Thickness on Intrapulpal Temperature Rise

Table 3

Mean and standard deviation values of the intrapulpal temperature rises.

Composite	VALO LED	Remaining dentin thickness of 1 mm		Remaining dentin thickness of 0.5 mm
		Mean	SD	Mean	SD
SDR	Standard	5,76^C	0,85	7,22^C	1,17	0.005
	High	4,61^BC	0,92	5,44^AB	,84	0.051
ESTELITE	Standard	5,46^C	0,95	7,05^C	,90	0.001
	High	4,38^BC	0,86	5,55^AB	,93	<0.0001
FILTEK	Standard	4,61^BC	0,88	5,56^AB	,64	0.014
	High	2,75^A	0,69	4,28^A	,74	<0.0001
SONICFILL	Standard	5,10^BC	0,59	6,40^BC	,62	<0.0001
	High	3,99^AB	0,52	5,18^AB	,50	<0.0001
		0,000	0,000

^aResults of one-way analysis of variance; ^bresults of independent t-test; SD indicates standard deviation; same superscript letters indicate not significantly different according to the Tukey test, . Different superscript letters indicate significantly different according to the Tukey test, .