Table of Contents Author Guidelines Submit a Manuscript
BioMed Research International
Volume 2019, Article ID 6368958, 8 pages
https://doi.org/10.1155/2019/6368958
Research Article

Torsional and Bending Properties of V Taper 2H, ProTaper NEXT, NRT, and One Shape

1Department of Conservative Dentistry, KyungHee University Dental Hospital, 23 Kyungheedaero, Dongdaemun-gu, Seoul 02447, Republic of Korea
2Department of Conservative Dentistry, Dental Research Institute, Seoul National University Dental Hospital, School of Dentistry, Seoul National University, 101 Daehak-ro, Jongno-gu, Seoul 03080, Republic of Korea
3The First Dental Clinic, 14 Siga-ro, Deoksan-eup, Jincheon-gun, Chungcheongbuk-do 27875, Republic of Korea
4Department of Conservative Dentistry, Graduate School, Kyung Hee University School of Dentistry, 23 Kyungheedaero, Dongdaemun-gu, Seoul 02447, Republic of Korea
5Department of Conservative Dentistry, Kyung Hee University School of Dentistry, 23 Kyungheedaero, Dongdaemun-gu, Seoul 02447, Republic of Korea
6Schulich School of Medicine & Dentistry, University of Western Ontario, 1151 Richmond Street, London ON N6A3K7, Canada
7Department of Conservative Dentistry, College of Dentistry, Gangneung-Wonju National University, 7 Jukheon-Gil, Gangneung, Kangwon-do 25457, Republic of Korea

Correspondence should be addressed to Seok Woo Chang; rk.ca.uhk@cms7002cws

Received 13 August 2019; Accepted 17 October 2019; Published 7 November 2019

Academic Editor: Radovan Zdero

Copyright © 2019 Soram Oh et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. A. Guelzow, O. Stamm, P. Martus, and A. M. Kielbassa, “Comparative study of six rotary nickel-titanium systems and hand instrumentation for root canal preparation,” International Endodontic Journal, vol. 38, no. 10, pp. 743–752, 2005. View at Publisher · View at Google Scholar · View at Scopus
  2. M. B. McGuigan, C. Louca, and H. F. Duncan, “Endodontic instrument fracture: causes and prevention,” British Dental Journal, vol. 214, no. 7, pp. 341–348, 2013. View at Publisher · View at Google Scholar · View at Scopus
  3. P. Parashos and H. H. Messer, “Rotary NiTi instrument fracture and its consequences,” Journal of Endodontics, vol. 32, no. 11, pp. 1031–1043, 2006. View at Publisher · View at Google Scholar · View at Scopus
  4. B. Sattapan, G. J. Nervo, J. E. Palamara, and H. H. Messer, “Defects in rotary nickel-titanium files after clinical use,” Journal of Endodontics, vol. 26, no. 3, pp. 161–165, 2000. View at Publisher · View at Google Scholar · View at Scopus
  5. O. A. Peters, M. G. de Azevedo Bahia, and E. S. Pereira, “Contemporary root canal preparation: innovations in biomechanics,” Dental Clinics of North America, vol. 61, no. 1, pp. 37–58, 2017. View at Publisher · View at Google Scholar · View at Scopus
  6. A. C. Viana, M. Chaves Craveiro de Melo, M. Guiomar de Azevedo Bahia, and V. T. Lopes Buono, “Relationship between flexibility and physical, chemical, and geometric characteristics of rotary nickel-titanium instruments,” Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, vol. 110, no. 4, pp. 527–533, 2010. View at Publisher · View at Google Scholar · View at Scopus
  7. J. Zupanc, N. Vahdat-Pajouh, and E. Schȁfer, “New thermomechanically treated NiTi alloys-a review,” International Endodontic Journal, vol. 51, no. 10, pp. 1088–1103, 2018. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Shen, H. M. Zhou, Y. F. Zheng, B. Peng, and M. Haapasalo, “Current challenges and concepts of the thermomechanical treatment of nickel-titanium instruments,” Journal of Endodontics, vol. 39, no. 2, pp. 163–172, 2013. View at Publisher · View at Google Scholar · View at Scopus
  9. S. B. Alapati, W. A. Brantley, M. Iijima et al., “Metallurgical characterization of a new nickel-titanium wire for rotary endodontic instruments,” Journal of Endodontics, vol. 35, no. 11, pp. 1589–1593, 2009. View at Publisher · View at Google Scholar · View at Scopus
  10. H. S. Topçuoglu, G. Topçuoglu, A. Akti, and S. Duzgun, “In vitro comparison of cyclic fatigue resistance of protaper next, hyflex cm, oneshape, and protaper universal instruments in a canal with a double curvature,” Journal of Endodontics, vol. 42, no. 6, pp. 969–971, 2016. View at Publisher · View at Google Scholar · View at Scopus
  11. A. M. Elnaghy and S. E. Elsaka, “Laboratory comparison of the mechanical properties of trushape with several nickel-titanium rotary instruments,” International Endodontic Journal, vol. 50, no. 8, pp. 805–812, 2017. View at Publisher · View at Google Scholar · View at Scopus
  12. A. M. Elnaghy and S. E. Elsaka, “Assessment of the mechanical properties of protaper next nickel-titanium rotary files,” Journal of Endodontics, vol. 40, no. 11, pp. 1830–1834, 2014. View at Publisher · View at Google Scholar · View at Scopus
  13. H. M. Zhou, Y. Shen, W. Zheng, L. Li, Y. F. Zheng, and M. Haapasalo, “Mechanical properties of controlled memory and superelastic nickel-titanium wires used in the manufacture of rotary endodontic instruments,” Journal of Endodontics, vol. 38, no. 11, pp. 1535–1540, 2012. View at Publisher · View at Google Scholar · View at Scopus
  14. Y. Shen, W. Qian, H. Abtin, Y. Gao, and M. Haapasalo, “Fatigue testing of controlled memory wire nickel-titanium rotary instruments,” Journal of Endodontics, vol. 37, no. 7, pp. 997–1001, 2011. View at Publisher · View at Google Scholar · View at Scopus
  15. R. B. Casper, H. W. Roberts, M. D. Roberts, V. T. Himel, and B. E. Bergeron, “Comparison of autoclaving effects on torsional deformation and fracture resistance of three innovative endodontic file systems,” Journal of Endodontics, vol. 37, no. 11, pp. 1572–1575, 2011. View at Publisher · View at Google Scholar · View at Scopus
  16. E. Ninan and D. W. Berzins, “Torsion and bending properties of shape memory and superelastic nickel-titanium rotary instruments,” Journal of Endodontics, vol. 39, no. 1, pp. 101–104, 2013. View at Publisher · View at Google Scholar · View at Scopus
  17. S. W. Chang, K. S. Shim, Y. C. Kim et al., “Cyclic fatigue resistance, torsional resistance, and metallurgical characteristics of v taper 2 and v taper 2 h rotary NiTi files,” Scanning, vol. 38, no. 6, pp. 564–570, 2016. View at Publisher · View at Google Scholar · View at Scopus
  18. C. Pirani, P. P. Cirulli, S. Chersoni, L. Micele, O. Ruggeri, and C. Prati, “Cyclic fatigue testing and metallographic analysis of nickel-titanium rotary instruments,” Journal of Endodontics, vol. 37, no. 7, pp. 1013–1016, 2011. View at Publisher · View at Google Scholar · View at Scopus
  19. S. Y. Park, G. S. Cheung, J. Yum, B. Hur, J. K. Park, and H. C. Kim, “Dynamic torsional resistance of nickel-titanium rotary instruments,” Journal of Endodontics, vol. 36, no. 7, pp. 1200–1204, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. A. M. Elnaghy and S. E. Elsaka, “Torsion and bending properties of oneshape and waveone instruments,” Journal of Endodontics, vol. 41, no. 4, pp. 544–547, 2015. View at Publisher · View at Google Scholar · View at Scopus
  21. X. Xu, M. Eng, Y. Zheng, and D. Eng, “Comparative study of torsional and bending properties for six models of nickel-titanium root canal instruments with different cross-sections,” Journal of Endodontics, vol. 32, no. 4, pp. 372–375, 2006. View at Publisher · View at Google Scholar · View at Scopus
  22. T. O. Kim, G. S. Cheung, J. M. Lee, B. M. Kim, B. Hur, and H. C. Kim, “Stress distribution of three NiTi rotary files under bending and torsional conditions using a mathematic analysis,” International Endodontic Journal, vol. 42, no. 1, pp. 14–21, 2009. View at Publisher · View at Google Scholar · View at Scopus
  23. G. Gambarini, G. Pompa, S. Di Carlo, M. De Luca, and L. Testarelli, “An initial investigation on torsional properties of nickel-titanium instruments produced with a new manufacturing method,” Australian Endodontic Journal, vol. 35, no. 2, pp. 70–72, 2009. View at Publisher · View at Google Scholar · View at Scopus
  24. S. H. Baek, C. J. Lee, A. Versluis, B. M. Kim, W. Lee, and H. C. Kim, “Comparison of torsional stiffness of nickel-titanium rotary files with different geometric characteristics,” Journal of Endodontics, vol. 37, no. 9, pp. 1283–1286, 2011. View at Publisher · View at Google Scholar · View at Scopus
  25. R. He and J. Ni, “Design improvement and failure reduction of endodontic files through finite element analysis: application to v-taper file designs,” Journal of Endodontics, vol. 36, no. 9, pp. 1552–1557, 2010. View at Publisher · View at Google Scholar · View at Scopus
  26. G. Alexandrou, K. Chrissafis, L. Vasiliadis, E. Pavlidou, and E. K. Polychroniadis, “Effect of heat sterilization on surface characteristics and microstructure of mani nrt rotary nickel-titanium instruments,” International Endodontic Journal, vol. 39, no. 10, pp. 770–778, 2006. View at Publisher · View at Google Scholar · View at Scopus
  27. C. C. Tsao, J. U. Liou, P. H. Wen, C. C. Peng, and T. S. Liu, “Study on bending behavior of nickel-titanium rotary endodontic instruments by analytical and numerical analyses,” International Endodontic Journal, vol. 46, no. 4, pp. 379–388, 2013. View at Publisher · View at Google Scholar · View at Scopus
  28. D. Al-Sudani, “Topographic analysis of hyflex(®) controlled memory nickel-titanium files,” Journal of International Oral Health, vol. 6, pp. 1–4, 2014. View at Google Scholar
  29. O. A. Peters, C. I. Peters, K. Schonenberger, and F. Barbakow, “Protaper rotary root canal preparation: assessment of torque and force in relation to canal anatomy,” International Endodontic Journal, vol. 36, no. 2, pp. 93–99, 2003. View at Publisher · View at Google Scholar · View at Scopus
  30. L. Testarelli, G. Plotino, D. Al-Sudani et al., “Bending properties of a new nickel-titanium alloy with a lower percent by weight of nickel,” Journal of Endodontics, vol. 37, no. 9, pp. 1293–1295, 2011. View at Publisher · View at Google Scholar · View at Scopus
  31. A. Santos Lde, M. G. Bahia, E. B. de Las Casas, and V. T. Buono, “Comparison of the mechanical behavior between controlled memory and superelastic nickel-titanium files via finite element analysis,” Journal of Endodontics, vol. 39, no. 11, pp. 1444–1447, 2013. View at Publisher · View at Google Scholar · View at Scopus
  32. G. Gambarini, R. Gerosa, M. De Luca, M. Garala, and L. Testarelli, “Mechanical properties of a new and improved nickel-titanium alloy for endodontic use: an evaluation of file flexibility,” Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology, and Endodontology, vol. 105, no. 6, pp. 798–800, 2008. View at Publisher · View at Google Scholar · View at Scopus