The Novel Application of Three-Dimensional Printing Assisted Patient-Specific Instrument Osteotomy Guide in the Precise Osteotomy of Adult Talipes Equinovarus

<div>Intraoperative photographs of operation assisted by the 3D printing assisted PSI osteotomy guide. (a) The arc-shaped incision was made from the dorsolateral side of the foot to about 2 cm below the lateral malleolus. (b) and (c) The PSI osteotomy guide was fixed with the preset Kirschner wire guide holes on the binding surfaces, and the precise osteotomy was performed under the guidance of guides. (d) The reconstruction plate was used for the shaping and fixation of ATE malformation.</div>

BioMed Research International

fig2

Figure 2

Figure 2: The Novel Application of Three-Dimensional Printing Assisted Patient-Specific Instrument Osteotomy Guide in the Precise Osteotomy of Adult Talipes Equinovarus 

Figure 2 | The Novel Application of Three-Dimensional Printing Assisted Patient-Specific Instrument Osteotomy Guide in the Precise Osteotomy of Adult Talipes Equinovarus 