Abstract
This study is aimed at evaluating the binding effect of Acacia etbaica gum in granule and tablet formulations using paracetamol as a model drug. Some physicochemical properties of the purified gum such as pH, the presence of tannin and dextrin, solubility, viscosity, loss on drying, total ash value, water solubility index, swelling power, moisture sorption, and powder flow properties were investigated. Paracetamol granules were prepared using wet granulation method at 2%, 4%, 6%, and 8% of the Acacia etbaica gum and compared with granules prepared with reference binders (PVP K-30 and Acacia BP) in similar concentrations. The granules were characterized for bulk and tapped densities, compressibility index and Hausner ratio, angle of repose, flow rate, and friability. Finally, the prepared granules were compressed into tablets and evaluated for different tablet characteristics: weight uniformity, thickness, diameter, crushing strength, tensile strength, friability, disintegration time, and in vitro release profile. The physicochemical characterization revealed that tannins and dextrin are absent in the gum, and the gum has acidic pH. Both the moisture content and total ash values were within the official limits. Furthermore, the gum was found to be soluble in cold and hot water but insoluble in organic solvent and exhibited a shear thickening viscosity profile and excellent flow properties with excellent compressibility. The granules prepared with the gum of Acacia etbaica and reference binders showed good particle size distribution and excellent flow and compressibility properties. All the prepared tablets passed pharmacopeial specifications with respect to their uniformity of weight, thickness, and disintegration time. Tablets formulated with Acacia etbaica gum and acacia BP meet the compendial specification for friability at binder concentrations more than 2%. Drug release properties of all the batches formulated with Acacia etbaica, PVP, and acacia BP complied with the pharmacopeial specification. It can be concluded that the gum of Acacia etbaica could be explored as an alternative excipient for its binder effect in granule and tablet formulations.
1. Introduction
Gums are pathological products formed following injury to the plant or due to unfavorable conditions such as drought and breakdown of cell walls (extracellular formation; gummosis) [1].
Gums are used as pharmaceutical excipients such as binding agents in tablet formulation. Binding agents are useful in achieving various tablet mechanical strength and drug release properties for different pharmaceutical purposes [2, 3].
In Ethiopia, more than 40 indigenous species of the genus Acacia have been identified, and about 17 of them are gum and gum resins bearing species. Most of the gum and resin bearing are naturally grown under arid, warm, and rugged topographic conditions in almost all regions of Tigray, Amhara, Oromia, Gambella, Somalia, Benshangul, Southern Region, and Afar in order of decreasing production area. Acacia etbaica is a member of Fabaceae family. It is a tree or shrub of 2.5-12 m tall ([4–6]).
The gum acacia obtained from different species of acacia have been proposed for various potential uses in pharmaceutical industry, such as stabilizer in emulsions and suspensions, binder in tablet formation, sustained drug release properties, and coating of medications [7–11]. However, no work has been reported so far on the use of gums of Acacia etbaica. Therefore, this study is aimed at characterizing the physicochemical properties of Acacia etbaica gum and evaluating its suitability as a binding agent in granules and tablet formulations in comparison with two reference binders, acacia BP and PVP, using paracetamol as a model drug. Paracetamol is a sparingly soluble drug with poor compression properties, which requires a binding agent among other excipients to form satisfactorily strong tablets [12].
2. Materials and Methods
2.1. Materials
The gum of Acacia etbaica was collected from Klte Awulaelo district, Eastern Zone of Tigray region; paracetamol (batch no. 1706003, HEDEI JIHENG, Pharmaceuticals, Germany), PVP K-30 (BOAINKY, Pharmaceutical Ltd., India), and Acacia BP (batch no. 242, BOAINKY, Pharmaceutical Ltd., India) were kindly donated from Addis Pharmaceutical Factory Sh. Co. Lactose, magnesium stearate, potassium dihydrogen phosphate, sodium hydroxide, sodium chloride, sodium hydrogen phosphate dehydrate, acetone, HCl (LOBA CHEMIE PVT. LTD, England), maize starch (DBEBATS, India), talc (SISCO LAB, India), ethanol (Batch no. 026193, Fine Chemical General Trading, Ethiopia), and chloroform (CHEMIE PVT. LTD., England) were purchased from local market. All the chemicals were analytical grade and used as received.
3. Methods
3.1. Purification of the Gum
The gum of Acacia etbaica size was reduced using an electrical grinder (NM-8300, Japan), dissolved in distilled water in 1 : 2 proportions, and filtered through a muslin cloth. Then, to the filtrate, 70% absolute ethanol was added to precipitate the gum. The precipitated gum was then washed and dried in an oven (Beschickug 100-800, Germany) at 50°C for 18 hr. Finally, the dried gum was powdered to fine particles, sieved through a 180 μm sieve (FRTSCH, 04003043, GERMANY) and stored in an air tight container [7].
3.2. Physicochemical Characterization of Acacia etbaica Gum
3.2.1. Test for Tannins
Ferric chloride TS (0.1 mL) was added to 10 mL (10% ) of gum solution, formation of a dark blue color indicate the presence of tannins [13].
3.2.2. Presence of Starch or Dextrin
A 10 mL quantity of gum (10% ) was boiled and cooled. Then, 0.1 mL iodine TS was added, and formation of blue or reddish-brown colour indicates the presence of dextrin [13].
3.2.3. Relative Solubility Test
The gum powder (1 g) was added to 10 mL of cold and hot distilled water, acetone, chloroform, and ethanol. After 12 h, 5 mL of the clear supernatant was taken into small preweighed evaporating dishes and heated to dryness over a thermostatic water bath (HH-54, India) at 50°C for organic solvents and in an oven (Beschickug 100-800, Germany) at 105°C for 2 h for distilled water. The weights of the dried residue with reference to the volume of the solutions were determined using analytical balance (OHAUS, AR 3130, China) and expressed as the percentage solubility of the gum in the solvents [14].
3.2.4. Water Solubility Index and Swelling Power
Water solubility index and swelling power of the gum was determined using the method described by Torruco-Uco and Betancur-Ancona [15]. First, 0.5 g of gum powder was weighed directly into centrifuge tubes, and 10 mL of distilled water was added to each tube. The tubes were kept in a thermostatically controlled water bath (HH-5454, India) at 25°C, 37°C, 55°C, 65°C, and 75°C for 30 minutes with frequent mixing in 2-minute intervals. The tubes were cooled and centrifuged (CENTRIFUGE, PLC-03, U.S.A) at 3000 rpm for 15 minutes. The supernatant was removed, and the sediment weight (Ws) was determined for each tube. The supernatant was dried to constant weight (W1) in an oven (Beschickug, 100-800, Germany) at 105°C for 12 hr. The water solubility index (WSI) and swelling power (SP) of the gum were calculated using Equations (1) and (2), respectively. where WSI is the water solubility index, W1 is constant weight, Sp is swelling power, and Ws is sediment weight.
3.3. Viscosity of Acacia etbaica Gum
Viscometer (BROOKFIELD, RVDVE, U.S.A) was used to determine the effects of gum concentration and shear rate on apparent viscosity of the gum solution. To determine the effect of gum concentration on viscosity, different concentrations (5, 10, 20, and 30% ) of Acacia etbaica gum was dissolved in 250 mL of distilled water with continuous stirring. Then, viscosity measurements were conducted in triplicate at shear rate of 30 rpm. The effect of shear rate on apparent viscosity was determined by preparing 10% of gum solution in 250 mL of distilled water with continuous stirring. Then, viscosity measurements were made at 30, 50, 60, and 100 rpm. All the measurements were carried out at room temperature [14].
3.4. Determination of the pH of Gum
The pH of the gum mucilage (5% ) was determined using a wagtech pH meter (AD 8000, Japan). The pH meter was set to neutral at a room temperature of 25°C, electrode was immersed into the gum mucilage, and the reading on the pH meter was recorded.
3.5. Loss on Drying
A 1.0 g quantity of the gum was transferred into a preweighed petri dish, then it was dried in an oven (Beschickug, 100-800, Germany) at 105°C until a constant weight was obtained. The loss on drying was determined as the ratio of the weight of moisture lost to the weight of sample multiplied by 100 [13].
3.6. Total Ash Determination
A 2 g sample of powder was weighed in a preweighed ashing crucible, followed by heating in a furnace (CARBOLITE, CWF 12/5, United Kingdom) at 450°C for 8 h. The sample was removed and kept in a desiccator, and weighed total ash values in the samples were calculated using where is the mass of the ashing crucible, is the mass of crucible plus ash, and is the mass of the sample [13].
3.7. Moisture Sorption Study
Moisture sorption pattern was studied at different relative humidity. Pyrex desiccators containing distilled water, saturated solution of NaCl, and appropriate concentrations of NaOH (40, 31.58, and 24.66%) were prepared to obtain 100, 75.6, 60, 40, and 20% relative humidity (RH), respectively, and stored at room temperature. Two grams of oven predried, at 120°C for 4 h, Acacia etbaica gum powder was spread evenly on each petri dish and transferred to desiccators. Samples were equilibrated for four weeks at room temperature. The weights were recorded, and moisture uptake of each sample was calculated as the weight difference of the gum before and after equilibrium [16].
3.8. Determination of Density and Density-Related Properties
Thirty grams of the gum powder was introduced into 250 mL measuring cylinder, the volume occupied by the powder was noted, and the bulk density () was calculated using where is the mass of sample (in g) and is the bulk volume of the sample powder (in mL).
To determine tapped density, the bulk in the cylinder was tapped using tapped densitometer (ERWEKA, SVM 223, Germany) at a rate of 250 taps/min. The volume occupied by the gum powder was recorded, and the tapped density () was calculated using Equation (5) [13]. where is the mass of the sample (ing) and is tapped volume of the sample (in mL).
Hausner ratio and Carr’s index were calculated from bulk and tapped densities using Equations (6) and (7), respectively [13]. where is the bulk density and is the tapped density.
3.9. Flow Property of the Gum Powder
Flow rate and angle of repose of the gum was determined using the powder flowability tester (PHARMA TEST, PT GS4, Germany).
3.10. Drug-Excipient Compatibility Studies
Fourier transform infrared (FTIR) spectroscopy was used to study the gum and drug interaction. The pure gum, the drug alone, and a mixture of the gum and the drug were mixed separately with IR grade KBr disc using paraffin as a film forming agent. The film on the disk was scanned over a wave number of 4000-400 cm-1 in an IR spectrometer (SHIMADZU, IR prestige 21, Japan). The major peaks of IR spectra of paracetamol in the mixture was analyzed and compared with the IR spectra of paracetamol alone.
3.11. Acute Oral Toxicity Test
Acute toxicity study of the gum Acacia etbaica was carried out in female mice that had an average weight of 25 g and age of 6-8 weeks. They were housed in appropriate cages in appropriate environment, fed standard diet, and allowed free access to water until used. The mice were divided into experimental and control groups of five mice each. The mice were fasted overnight, and the experimental groups received 5000 mg/kg of Acacia etbaica gum in distilled water, while the control group received 33.3 mL/kg of distilled water orally. The animals were observed for behavioral changes for the following 4 hrs and mortality for the next two weeks [17].
3.12. Preparation of Granules
Paracetamol granules were prepared using different concentrations (2, 4, 6, and 8% ), each of Acacia etbaica gum, PVP K-30, and Acacia BP as binders using the wet granulation technique. The desired quantities of paracetamol and lactose were dry mixed for 5 minutes. Then, the mixture was moistened with binder solution to produce granules containing various concentrations of binders. Wet massing was continued for 5 minutes, then granulated manually by passing through a 1400 μm sieve and dried in a hot air oven (Beschickug 100-800, Germany) at 50°C for 18 h. The dried granules were passed through a 1000 μm sieve [14].
3.13. Characterization of Granules
3.13.1. Determination of Densities, Density-Related Properties, Flow Rate, and Angle of Repose
Granules were characterized for bulk and tapped densities, density-related properties, flow rate, and angle of repose as per the procedures described above for the gum powder.
3.13.2. Determination of Granule Friability
Ten grams from each formulation of granule with larger than 315 μm size were put into a Friabilator chamber (PHARMA TEST, PTF 10E, Germany) and allowed to revolve at 25 rpm for 4 minutes. The granules were then sieved using a 315 μm sieve, and percent loss was calculated as friability.
3.13.3. Preparation of Paracetamol Tablets
Different formulations of paracetamol tablets were prepared with the gum of Acacia etbaica, PVP K-30, and Acacia BP as shown in Table 1. The paracetamol granules were blended with maize starch, talc, and magnesium stearate for 5 minutes. The blended granules were compressed into tablets at a fixed compression force of 15 KN using tablet machine (RIVA S. A, MII 195, Buenos Aires, Argentina) which was fitted with 10 mm diameter flat-faced punches. The die volume was adjusted to get a target weight of 400 mg paracetamol tablet.
3.14. Evaluation of Paracetamol Tablets
3.14.1. Weight Uniformity, Thickness, and Diameter of Tablets
Twenty tablets were randomly selected from each batch and assessed gravimetrically on individual basis using an analytical balance (OHAUS, AR 3130, China). The mean weight and standard deviation were calculated. The thickness and diameter of the tablets were measured using a tablet hardness tester (PHARMA TEST, PTB311E, Germany).
3.15. Crushing Strength
The force required to break 20 tablets was determined by the application of a diametrical force using a hardness tester (PHARMA TEST, PTB311E. Germany).
3.16. Tensile Strength
The tensile strengths (σ) of the tablets were calculated using the data obtained from crushing strength, diameter, and thickness of the tablet using where is the tensile strength of the tablet (Nm-2), is the crushing strength (N), is the tablet diameter (m), and is the thickness (m).
3.17. Friability Testing
Ten intact tablets were randomly selected, dedusted, and weighed. The tablets were placed in Friabilator (PHARMA TEST, PTF 10E, Germany) and subjected to tumbling actions at 25 rpm for 4 minutes. Finally, the tablets were once again dedusted and reweighed to determine the percentage loss of weight.
3.18. Disintegration Tests
The disintegration test was done using six tablets from each batch in distilled water at using a disintegration apparatus (PHARMA TEST, PTZS 230, Germany). The disintegration time was taken to be the time at which no granule of any tablet was left on the meshes of the apparatus [13].
3.19. In Vitro Drug Release Studies
The release profile of paracetamol from tablets was determined using USP type II dissolution apparatus (PHARMA TEST, PTWS 20D, Germany) at paddle rotation speed of 50 rpm. The dissolution medium was 900 mL of phosphate buffer of pH 5.8 maintained at a temperature of . In all experiments, 5 mL of sample was withdrawn at 5, 10, 15, 20, 30, 45, and 60 min. Each withdrawn sample was replaced with an equal volume of fresh medium at the same temperature to maintain sink condition. Absorbance of the samples was measured using UV/visible spectrophotometer at 243 nm after appropriate dilution with phosphate buffer of pH 5.8. Percentage cumulative drug release was calculated using the equation obtained from a standard curve.
3.20. Statistical Analysis
Microsoft Excel and Origin® 8 software (OriginLab Corporation, MA, USA) were used for the statistical analysis. One-way analysis of variance (ANOVA) was used to compare the effect of binder concentration on granule and tablet mechanical and release properties. Tukey multiple comparison test was used to compare the differences between the properties of the different batches of granules and tablets. At 95% confidence interval, values less than or equal to 0.05 were considered significant. All the values are given as mean and standard deviation.
4. Results and Discussions
4.1. Physicochemical Characteristics of the Gum
As indicated in Table 2, the pH of the gum solution (5% ) at a temperature of 25°C was . This indicates that the gum is weakly acidic in nature. This is attributed to the fact that gums are generally macromolecular acids due to the presence of uronic acids in their structure [18].
The moisture content and total ash values of Acacia etbaica gum were and , respectively, which is within the pharmacopeial specification. The pharmacopeial set for the former is maximum of 15%, and the latter is maximum of 4% for acacia gum [13].
The solution of gum of Acacia etbaica did not show any bluish or reddish color upon the addition of iodine TS, which confirms the absence of starch or dextrin in the purified gum. Moreover, there was no blackish precipitate when ferric chloride TS was added which indicate the gum does not contain tannins. This is similar with the results of Acacia polyacantha [7].
4.2. Relative Solubility of the Gum
The solubility of Acacia etbaica gum in different solvents is presented in Table 3. Accordingly, the gum is soluble in hot and cold water and insoluble in organic solvents. The solubility of Acacia etbaica gum in aqueous solvent may be attributed to the branched nature of the polymer, which has been reported to be more soluble compared to the linear components. Any structural feature such as branching structure and charged group (carboxylate group, sulfate and phosphate groups) that hinders the intermolecular association leads to higher solubility. Structural characters such as linear chain and large molecular weight that promote the intermolecular association result in a poor solubility [19].
The solubility of the gum in hot water is higher than the corresponding solubility in cold water, since solubility increases with increase in temperature for most cases [20].
4.3. Water Solubility Index and Swelling Power
The solubility and swelling power of the gum are shown in Table 4. The solubility index and swelling power of the gum were generally increased with temperature. This may be due to disruption of intermolecular hydrogen bonds which maintain the structural integrity of the gum with increased temperature [21].
4.4. Moisture Sorption Properties
The moisture sorption characteristic of pharmaceutical excipients is imperative since most of the physicochemical, functional, and stability properties are affected by moisture. Moisture sorption study is important for the selection of suitable packaging materials and storage area of excipients [22]. Figure 1 shows the moisture sorption profile of Acacia etbaica gum equilibrated at various humidity levels. Moisture sorption increased generally with the RH. This is implying that the gum is hygroscopic at higher relative humidity values.
4.5. Viscosity
The application of plant gums is due to water-holding capacity to form a gel structure; this enhance the stability of formulation. Viscosity gives information about the molecular structure and the utilization of the gum [23]. As shown in Figure 2, the viscosity of the gum solution increased upon increasing the mucilage concentration. The higher viscosity obtained at higher concentrations of gum may be due to increased intermolecular interaction between the gum molecules and reduction in gum-solvent interaction [20]. The effect of shear rate on apparent viscosities of the solution is presented in Figure 3. The viscosities of the gum increased with increase in the shear rate. This shows the gum has a dilatant or shear-thickening behavior.
4.6. Flow Properties of the Gum Powder
Bulk and tapped densities give an insight on the packing arrangement of the particles and the compaction profile of a material. They can provide information on the flowability of powders and use to calculate Carr’s index and Hausner’s ratio, which are a measure of the compressibility and flowability of a powder. The angle of repose could be used as a quantitative measure of the cohesiveness or the tendency of powder to flow [24]. As shown in Table 5, the values of Carr’s index, Hausner’s ratio, and angle of repose of the gum indicate that the gum has excellent flow properties with excellent compressibility. This minimizes the modification of formulations for the improvement of the flow properties of the gum when it is used as an excipient in a pharmaceutical formulation [25].
4.7. Drug-Excipient Compatibility Study
Figures 4(a)–4(c) show the FTIR spectra of Acacia etbaica gum, paracetamol standard, and mixture of Acacia etbaica gum and paracetamol. As shown in Figure 4(a), the characteristic peaks of paracetamol are O–H stretching at 3322.44 cm-1, N–H stretching at 3158.41 cm-1, C=O stretching of the carboxyl ion at 1655.92 cm-1, C–N–H group at 1259.54 cm-1, and paradisubstituted aromatic ring at 836.16 cm-1 which were observed confirming the purity of the drug as per established standards. As shown in Figure 4(c), the O–H stretching band of paracetamol at 3322.44 cm-1 was also observed in the spectrum of its mixture with the gum. The absorption band N-H stretching at 3159.18 cm-1 and C=O stretching at 1655.92 cm-1 appeared in the spectrum of the physical mixture of paracetamol and Acacia etbaica. The C–H stretching band of paracetamol at 3000-2900 cm-1 was merged with C–H stretching of the Acacia etbaica. The C–N–H group was observed at 1259.54 cm-1 and paradisubstituted aromatic ring at 836.16 cm-1. This indicated that there were no physical and chemical interactions between the gum and paracetamol as there were no distinct changes in the available peaks with their corresponding wave numbers.
(a)
(b)
(c)
4.8. Acute Oral Toxicity
The findings of this study showed that the gum has no sign of acute toxicity. This was confirmed since the mice did not show behavioral changes like loss of appetite, hair erection, lacrimation, convulsions, salivation, and diarrhea for the next 4 hrs after administration of the gum dose of 5 g/kg body weight. In addition, no death was recorded in the next two days and even the following two weeks.
4.9. Evaluation of Granules
4.9.1. Density and Density-Related Properties
Densities of granules influence flowability and compressibility of the granules which can affect the quality of tablets. Granules having higher bulk density require relatively lower die fill volume than those having small bulk density. Density and related properties of the paracetamol granules prepared using Acacia etbaica gum, PVP k-30, and Acacia BP are presented in Table 6. The bulk and tapped densities of the granules prepared at all concentration and types of binder were decreased with increasing concentrations of the binders. This could be attributed to the increase in the proportion of larger granules with increasing binder concentrations. The granules occupy larger volumes making the bulk density value lower than smaller granules which occupy smaller bulk volumes [26]. At 2% and 4% binder concentration, granules prepared with Acacia etbaica had significantly lower bulk and tapped density than that of PVP and Acacia BP (). However, there was no significant difference in bulk and tapped density in all types of binders prepared with 6% and 8% binder concentrations (). Table 6 also shows that all the formulations have Carr’s index values below 15% implying the granules have excellent flow property. Hausner’s ratios were also observed to be less than 1.25, which also confirmed excellent flow property of the granules. Excellent flow property of the granule is necessary to ensure efficient mixing and acceptable weight uniformity in compressed tablets [27].
4.9.2. Flow Rate and Angle of Repose
Table 7 presents granule flow rate and angle of repose. As shown in the table, the angle of repose was decreased as the concentration of binder increased. This may be attributed to the reduced cohesive forces of the larger granules formed at higher binder concentration [28]. The angle of repose was below 30° for all the formulations, indicating the free flowing property of granules. This excellent flowability of granules is important for acceptable weight variation and content uniformity of tablets [29].
4.9.3. Granule Friability
Figure 5 shows the friability value of the different batches of granules. Accordingly, the friability values of the granules were decreased with increased binder concentration. This is due to the fact that as the concentration of binder increased, more bonding is attained so that the strength of the granules increased and became resistant to abrasion during the test. The percent friability of paracetamol granules formulated at 2% of AET was significantly higher than that of PVP and ABP (). There was no significant difference in friability values between all type of binders at 4%, 6%, and 8% binder concentration ().
4.10. Tablet Properties
4.10.1. Weight Uniformity, Thickness, and Diameter
Weight uniformity, thickness, and diameter of tablets are presented in Table 8. The weight of tablets prepared using different binders and at various concentrations met the compendial specification. The compendial specification for uniformity of weight states that for tablets weighing more than 250 mg, weights of more than two tablets should not deviate from the average weight of 20 tablets by more than 5% [13].
At 2% and 4% binder concentration, thickness of tablet prepared with Acacia etbaica is significantly higher than acacia BP (). But, there was no significant difference in thickness among the tablets formulated with Acacia etbaica gum and PVP at 6 and 8% binder concentration.
4.10.2. Crushing Strength, Tensile Strength, and Friability
Crushing strength of solid oral dosage forms provides a quantitative estimate of the internal bonding strength of the powder compact, which gives the tablet sufficient mechanical strength to maintain its internal structure and geometry under the applied external forces [30]. As shown in Figure 6, the crushing strength of tablets was increased as the binder concentration increased. The crushing strength of tablets prepared with 2%, 4%, and 6% of Acacia etbaica gum was significantly lower than that of PVP (), but almost similar to that of Acacia BP (). However, there was no significant difference in all binder types at 8% binder concentration.
The tensile strength of paracetamol tablets containing different concentrations of the Acacia etbaica gum and reference binders are presented in Figure 7. Accordingly, the tensile strength of tablets formulated with PVP was significantly higher than that of Acacia etbaica at all concentration and types of binder (). Nevertheless, there was no significant difference among Acacia BP and Acacia etbaica at 2%, 4%, and 6% binder concentration ().
Friability testing is employed to determine the physical strength of compressed and uncoated tablets upon exposure to mechanical shock and attrition [31]. As shown in Figure 8, the friability of the tablets decreased as the concentration of the binder increased. This may be due to increase in binder concentration results in increased intragranular force during compression leads lower rate of chipping on abrasion [32].
Tablets formulated with Acacia etbaica gum and Acacia BP meets the compendial specification for friability at binder concentrations more than 2%. On the other hand, tablets with PVP meet friability tests (>1%) at all binder concentration.
4.11. Disintegration Time
Disintegration is a physical process related to the mechanical breakdown of a tablet into smaller particles. It represents the breakdown of interparticle interactions generated during tablet compaction of granulated particles of the active pharmaceutical ingredient and excipients [33]. As shown in Figure 9, the disintegration time of the tablets increased as the binder concentration increased. This may be due to increase in binder concentration results in increase in cohesion between the particles; therefore, more time is needed to separate the particles [34].
All the prepared tablets disintegrated within 10 minutes, which conformed to the British Phamacopeia [13] specification for disintegration that states uncoated tablets should disintegrate within 15 minutes. There was no significant difference in disintegration time among tablets formulated with 2% and 4% binder concentration of AET, PVP, and ABP (). However, the disintegration time of tablets formulated at 6% and 8% of ABP was significantly longer than that of PVP and AET ().
4.12. In Vitro Drug Release Studies
In vitro drug release is used for measuring the time required for a given percentage of the drug substance in a tablet to dissolve under a specified set of conditions in an in vitro test. It is intended to provide information on physiological availability of the drug substance. Binders and granulating agents included in tablet formulation and other solid dosage forms can distinctly affect the dissolution of drugs [35]. Figures 10(a)–10(d) show the in vitro drug release profiles of the tablets prepared with different concentrations of binders. As the binder concentration increased, the release rate of paracetamol from the tablets generally decreased. This might be due to the higher bond strength of tablets with increased binder concentration that prolonged the dissolution time [36]. The USP 30/NF 25 [37] states that the quantity of drug released should not be less than 80% of the labeled amount of paracetamol in 30 minutes. All tablets formulated at various binder concentration of Acacia etbaica gum, polyvinylpyrrolidone, and Acacia BP meet the compendial specification. There was no significant difference in drug release profile among tablets formulated at 2%, 4%, and 6% binder concentration of AET, PVP, and ABP in 30 minutes (). However, the drug release rate of tablets formulated at 8% of PVP Figure 10(d) was significantly higher than that of AET and ABP (). This is due to the higher concentration of gums in the tablets forms a thicker and more viscous gel layer which appears a more strong barrier that decrease the drug release [38].
(a)
(b)
(c)
(d)
5. Conclusion
The physicochemical characterization of the Acacia etbaica gum revealed that tannin and dextrin are absent in the gum, and the moisture content and ash values were within the pharmacopeial limit. The gum was also found to be soluble in cold and hot water but insoluble in organic solvents and exhibited excellent flowability and compressibility. The oral acute toxicity study in mice showed that the gum is safe up to 5 g/kg body weight. The paracetamol granules were prepared by wet granulation technique using Acacia etbaica gum as binder acceptable flow properties and friability which were comparable to those prepared with reference binders. The tablets prepared with Acacia etbaica gum exhibited comparable physical and mechanical properties with respect to crushing strength, tensile strength, friability, uniformity of weight, disintegration time, and drug release profile with that of PVP and Acacia BP. Hence, it can be concluded that the gum of Acacia etbaica (Schweinf) can be positively explored as an alternative excipient for its binding effect in granule and tablet formulations.
Data Availability
The data used to support the findings of this study are available from the corresponding author upon request.
Conflicts of Interest
The authors have no conflict of interest regarding the publication of this paper.
Acknowledgments
The authors would like to acknowledge Addis Pharmaceutical Factory Sh. Co. for providing chemicals and access to their facilities and Mekelle University and Wollo University for sponsoring this study.