Table of Contents Author Guidelines Submit a Manuscript
Computational Intelligence and Neuroscience
Volume 2016, Article ID 3973627, 14 pages
http://dx.doi.org/10.1155/2016/3973627
Research Article

An Improved Genetic Fuzzy Logic Control Method to Reduce the Enlargement of Coal Floor Deformation in Shearer Memory Cutting Process

1School of Mechatronic Engineering, China University of Mining & Technology, Xuzhou 221116, China
2Xuyi Mine Equipment and Materials R&D Center, China University of Mining & Technology, Huai’an, China
3School of Information and Electrical Engineering, China University of Mining & Technology, Xuzhou 221116, China

Received 4 August 2015; Revised 30 December 2015; Accepted 18 January 2016

Academic Editor: Marc Van Hulle

Copyright © 2016 Chao Tan et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. Z. B. Wang, L. Si, C. Tan, and X. H. Liu, “A novel approach for shearer cutting load identification through integration of improved particle swarm optimization and wavelet neural network,” Advances in Mechanical Engineering, vol. 2014, Article ID 521629, 13 pages, 2014. View at Publisher · View at Google Scholar
  2. C. Tan, L. Si, X. Zhou, Z. Wang, and K. Wang, “A cooperative control method for fully mechanized mining machines based on fuzzy logic theory and neural networks,” Advances in Mechanical Engineering, vol. 7, no. 1, Article ID 424070, 2015. View at Publisher · View at Google Scholar
  3. A. D. Strange, J. C. Ralston, and V. Chandran, “Near-surface interface detection for coal mining applications using bispectral features and GPR,” Subsurface Sensing Technologies and Applications, vol. 6, no. 2, pp. 125–149, 2005. View at Publisher · View at Google Scholar · View at Scopus
  4. J. Asfahani and M. Borsaru, “Low-activity spectrometric gamma-ray logging technique for delineation of coal/rock interfaces in dry blast holes,” Applied Radiation and Isotopes, vol. 65, no. 6, pp. 748–755, 2007. View at Publisher · View at Google Scholar · View at Scopus
  5. F. Ren, Z. Liu, and Z. Yang, “Dynamics analysis for cutting part of shearer physical simulation system,” in Proceedings of the IEEE International Conference on Information and Automation (ICIA '10), pp. 260–264, IEEE, Harbin, China, June 2010. View at Publisher · View at Google Scholar · View at Scopus
  6. S.-X. Zhang, Y.-L. Zhang, Y.-Q. Wang, Y. Zhang, W. Liu, and Y.-Q. Wang, “Caved coal and rock spectrum on longwall face,” Journal of the China Coal Society, vol. 32, no. 9, pp. 971–974, 2007. View at Google Scholar
  7. L. Si, Z. Wang, X. Liu, Y. Yang, and L. Zhang, “A novel adjustment method for shearer traction speed through integration of T-S cloud inference network and improved PSO,” Computational Intelligence and Neuroscience, vol. 2014, Article ID 865349, 13 pages, 2014. View at Publisher · View at Google Scholar · View at Scopus
  8. D. Alford, “Automatic vertical steering of ranging drum shearers using MIDAS,” Mining Technology, vol. 4, pp. 125–129, 1985. View at Google Scholar
  9. W. Li, Q. G. Fan, Y. Q. Wang, and X. F. Yang, “Adaptive height adjusting strategy research of shearer cutting drum,” Acta Montanistica Slovaca, vol. 16, no. 1, pp. 114–122, 2011. View at Google Scholar · View at Scopus
  10. W. Li, C. Luo, H. Yang, and Q. Fan, “Memory cutting of adjacent coal seams based on a hidden Markov model,” Arabian Journal of Geosciences, vol. 7, no. 12, pp. 5051–5060, 2013. View at Publisher · View at Google Scholar · View at Scopus
  11. X.-P. Su, W. Li, and Q.-G. Fan, “A shearer drum height adjusting strategy using sliding-mode variable structure control,” Journal of the China Coal Society, vol. 37, no. 12, pp. 2107–2111, 2012. View at Google Scholar · View at Scopus
  12. Z. B. Wang, Z. P. Xu, and X. J. Dong, “Self-adaptive height adjustment of the drum in the shearer based on artificial immune and memory cutting,” Journal of China Coal Society, vol. 34, no. 10, pp. 1405–1409, 2009. View at Google Scholar
  13. Z. P. Xu and Z. B. Wang, “Modelling and simulation on shearer self-adaptive memory cutting,” Procedia Engineering, vol. 37, pp. 37–41, 2012. View at Publisher · View at Google Scholar
  14. X. Zhou, Z. Wang, C. Tan, R. Ji, and X. Liu, “A novel approach for shearer memory cutting based on fuzzy optimization method,” Advances in Mechanical Engineering, vol. 17, no. 5, pp. 1565–1568, 2013. View at Google Scholar
  15. L. A. Zadeh, “Is there a need for fuzzy logic?” Information Sciences, vol. 178, no. 13, pp. 2751–2779, 2008. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  16. D. Y. Wang, X. Lin, and Y. Zhang, “Fuzzy logic control for a parallel hybrid hydraulic excavator using genetic algorithm,” Automation in Construction, vol. 20, no. 5, pp. 581–587, 2011. View at Publisher · View at Google Scholar · View at Scopus
  17. J. A. Rodger, “A fuzzy nearest neighbor neural network statistical model for predicting demand for natural gas and energy cost savings in public buildings,” Expert Systems with Applications, vol. 41, no. 4, pp. 1813–1829, 2014. View at Publisher · View at Google Scholar · View at Scopus
  18. Y.-C. Chiou and L. W. Lan, “Genetic fuzzy logic controller: an iterative evolution algorithm with new encoding method,” Fuzzy Sets and Systems, vol. 152, no. 3, pp. 617–635, 2005. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  19. N. R. Cazarez-Castro, L. T. Aguilar, and O. Castillo, “Fuzzy logic control with genetic membership function parameters optimization for the output regulation of a servomechanism with nonlinear backlash,” Expert Systems with Applications, vol. 37, no. 6, pp. 4368–4378, 2010. View at Publisher · View at Google Scholar · View at Scopus
  20. C. Larbes, S. M. Aït Cheikh, T. Obeidi, and A. Zerguerras, “Genetic algorithms optimized fuzzy logic control for the maximum power point tracking in photovoltaic system,” Renewable Energy, vol. 34, no. 10, pp. 2093–2100, 2009. View at Publisher · View at Google Scholar · View at Scopus
  21. N. Xiong and L. Litz, “Reduction of fuzzy control rules by means of premise learning—method and case study,” Fuzzy Sets and Systems, vol. 132, no. 2, pp. 217–231, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  22. C.-S. Shieh, “Genetic fuzzy control for time-varying delayed uncertain systems with a robust stability safeguard,” Applied Mathematics and Computation, vol. 131, no. 1, pp. 39–58, 2002. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  23. K. Yang, J. Zheng, M. Yang, R. Zhou, and G. Liu, “Adaptive genetic algorithm for daily optimal operation of cascade reservoirs and its improvement strategy,” Water Resources Management, vol. 27, no. 12, pp. 4209–4235, 2013. View at Publisher · View at Google Scholar · View at Scopus
  24. Z. S. Ye, Z. Z. Li, and M. Xie, “Some improvements on adaptive genetic algorithms for reliability-related applications,” Reliability Engineering & System Safety, vol. 95, no. 2, pp. 120–126, 2010. View at Publisher · View at Google Scholar · View at Scopus
  25. W.-H. He, J.-L. Wang, and L.-S. Hu, “The improvement and application of Real-Coded multiple-population Genetic Algorithm,” Chinese Journal of Geophysics, vol. 52, no. 10, pp. 2644–2651, 2009. View at Publisher · View at Google Scholar · View at Scopus
  26. A. Misevius and D. Rubliauskas, “Enhanced improvement of individuals in genetic algorithms,” Information Technologies and Control, vol. 37, no. 3, pp. 179–186, 2008. View at Google Scholar
  27. R. Gholami, M. Shahabi, and M. R. Haghifam, “An efficient optimal capacitor allocation in DG embedded distribution networks with islanding operation capability of micro-grid using a new genetic based algorithm,” International Journal of Electrical Power & Energy Systems, vol. 71, pp. 335–343, 2015. View at Publisher · View at Google Scholar
  28. L. Zhang and T. N. Wong, “An object-coding genetic algorithm for integrated process planning and scheduling,” European Journal of Operational Research, vol. 244, no. 2, pp. 434–444, 2015. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  29. P. Thrift, “Fuzzy logic synthesis with genetic algorithms,” in Proceedings of the 4th International Conference on Genetic Algorithms, pp. 509–513, San Diego, Calif, USA, July 1991.
  30. G. Syswerda, “Uniform crossover in genetic algorithms,” in Proceedings of the Third International Conference on Genetic Algorithms, pp. 2–9, 1989.
  31. J. Page, R. Poli, and W. B. Langdon, “Smooth uniform crossover with smooth point mutation in genetic programming: a preliminary study,” in Genetic Programming, vol. 1598 of Lecture Notes in Computer Science, pp. 39–49, Springer, 1999. View at Google Scholar
  32. E. Falkenauer, “The worth of the uniform [uniform crossover],” in Proceedings of the Congress on Evolutionary Computation (CEC '99), vol. 1, IEEE, Washington, DC, USA, July 1999. View at Publisher · View at Google Scholar
  33. X.-B. Hu and E. Di Paolo, “An efficient genetic algorithm with uniform crossover for air traffic control,” Computers & Operations Research, vol. 36, no. 1, pp. 245–259, 2009. View at Publisher · View at Google Scholar · View at Scopus
  34. P. C. Pendharkar and J. A. Rodger, “Nonlinear programming and genetic search application for production scheduling in coal mines,” Annals of Operations Research, vol. 95, no. 1, pp. 251–267, 2000. View at Publisher · View at Google Scholar · View at Scopus
  35. Z. Michalewicz, Genetic Algorithms + Data Structures = Evolution Programs, Springer, Berlin, Germany, 1992.
  36. M. Srinivas and L. M. Patnaik, “Adaptive probabilities of crossover and mutation in genetic algorithms,” IEEE Transactions on Systems, Man and Cybernetics, vol. 24, no. 4, pp. 656–667, 1994. View at Publisher · View at Google Scholar · View at Scopus