AI-Assisted Tuberculosis Detection and Classification from Chest X-Rays Using a Deep Learning Normalization-Free Network Model

Acharya, Vasundhara; Dhiman, Gaurav; Prakasha, Krishna; Bahadur, Pranshu; Choraria, Ankit; M, Sushobhitha; J, Sowjanya; Prabhu, Srikanth; Chadaga, Krishnaraj; Viriyasitavat, Wattana; Kautish, Sandeep

doi:https://doi.org/10.1155/2022/2399428

Computational Intelligence and Neuroscience

On this page

Abstract Introduction Materials and Methods Experimental Results and Analysis Conclusion Data Availability Conflicts of Interest Authors’ Contributions References Copyright Related Articles

Special Issue

Recent Advances in Multimodal Environment for Biomedical Diagnosis and Computational Analysis

View this Special Issue

Research Article | Open Access

Volume 2022 | Article ID 2399428 | https://doi.org/10.1155/2022/2399428

AI-Assisted Tuberculosis Detection and Classification from Chest X-Rays Using a Deep Learning Normalization-Free Network Model

Vasundhara Acharya,¹Gaurav Dhiman,^2,3,4Krishna Prakasha,⁵Pranshu Bahadur,⁵Ankit Choraria,⁵Sushobhitha M,⁶Sowjanya J,⁷Srikanth Prabhu,¹Krishnaraj Chadaga,¹Wattana Viriyasitavat,⁸and Sandeep Kautish⁹

Academic Editor: Anandakumar Haldorai

Received17 May 2022

Revised24 Aug 2022

Accepted01 Sept 2022

Published03 Oct 2022

Abstract

Tuberculosis (TB) is an airborne disease caused by Mycobacterium tuberculosis. It is imperative to detect cases of TB as early as possible because if left untreated, there is a 70% chance of a patient dying within 10 years. The necessity for supplementary tools has increased in mid to low-income countries due to the rise of automation in healthcare sectors. The already limited resources are being heavily allocated towards controlling other dangerous diseases. Modern digital radiography (DR) machines, used for screening chest X-rays of potential TB victims are very practical. Coupled with computer-aided detection (CAD) with the aid of artificial intelligence, radiologists working in this field can really help potential patients. In this study, progressive resizing is introduced for training models to perform automatic inference of TB using chest X-ray images. ImageNet fine-tuned Normalization-Free Networks (NFNets) are trained for classification and the Score-Cam algorithm is utilized to highlight the regions in the chest X-Rays for detailed inference on the diagnosis. The proposed method is engineered to provide accurate diagnostics for both binary and multiclass classification. The models trained with this method have achieved 96.91% accuracy, 99.38% AUC, 91.81% sensitivity, and 98.42% specificity on a multiclass classification dataset. Moreover, models have also achieved top-1 inference metrics of 96% accuracy and 98% AUC for binary classification. The results obtained demonstrate that the proposed method can be used as a secondary decision tool in a clinical setting for assisting radiologists.

1. Introduction

Lung diseases are often associated with excruciating pain and suffering as they affect the breathing pattern of the patient due to suffocation and related symptoms. Tuberculosis (TB) is one such detrimental variant of lung infections that has created a devastating impact on humankind. Tuberculosis is caused by the Mycobacterium tuberculosis bacteria. In general, the lungs are the main target area of this disease, but it can also affect other parts of the body. TB is a contagious disease, i.e., when people infected with TB cough or sneeze, they transmit the disease-causing bacteria in the air. Only a small quantity of these germs are enough to effectively infect a healthy person. Although scientific discoveries and research have been helping to curb the growing influence of TB, the meagre annual medical progress rate in this sector has been unsuccessful in bringing a drastic drop of TB affected patients. According to the Global Tuberculosis Report, 2020, generated by the WHO [1], approximately 10 million people were affected by TB worldwide in 2019. Additionally, HIV/AIDS and TB form a deadly combination. The HIV infection significantly minimizes the strength of the immunity system of an individual, which serves as a favourable condition for an HIV positive patient to contract TB. Out of the 1.4 million deaths caused by TB in 2019, more than 200 thousand patients were HIV positive. In Figure 1, description of chest X-ray of a healthy, viral, and tuberculosis patient is provided [2].

(a)

(b)

(c)

Manual inspection methods are labour intensive and require expertise in that particular domain to give accurate inferences. Therefore, there arises a need to merge the state-of-the-art technological advancements with medical theories and procedures. Artificial intelligence as a sector has boomed magnificently in recent decades and has spread across numerous industries. The entry of artificial intelligence into the medical field has propelled the progress rate tremendously in several types of research and has given scientists the freedom to explore uncharted territories.

Thus, the government authorities and multinational companies in the health sector have been encouraging institutions and academicians to utilize the maximum potential of machine learning and artificial intelligence to accelerate research in important domains such as medical imaging, diagnosis, and drug development. Dermatology, which is an image and screening intensive subfield of medicine, has great synergy with deep learning techniques pertaining to image processing [3–6]. Automation is carried out in electronic health records [7], therapeutic chatbots [8–10], and health monitoring.

Systems [11, 12] have rapidly expanded with the help of deep learning algorithms. With the help of natural language processing, scientists are able to identify and enhance the drug-drug interaction in medical literature [13]. Predictive modelling and decision making are important applications of AI in primary care [14–16].

In TB, computer-aided detection (CAD) is the most widely used artificial intelligence tool. The tool analyses the patient’s chest X-rays and determines if the patient is affected by TB. This process reduces the load on the radiologists to meticulously scan through every radiographic film and ultimately speeds up the screening process.

The unique approach in this research is to leverage the power of normalization-free networks to escalate X-ray image classification. We experiment on different normalization-free architectures and compare them with their standard versions to prove their superiority. An AUC of 98% is obtained by the base line model. This proves the potential use of CAD in the diagnosis of the deadly TB.

1.1. Contributions and Related Literature

A number of papers have been published which diagnose TB using deep learning. However, in this article, the novelty lies in a variety of factors from data augmentation and regularization to the use of classification network. Chest Visualization is also discussed in this research which will help the medical personnel. Following are our vital contributions to this research.(1)The use of RandAugement algorithm for augmentation. It is an automated technique which is known to deliver accurate results.(2)The use of progressive resizing to augment the images based on their sizes.(3)Classification using normalization-free network instead of batch normalization to tackle performance issues.(4)Adaptive grading clipping technique used in this research to avoid the problem of exploding gradients.(5)Furthermore, the Score-CAM technique used for thorough chest visualization from a medical view-point.

A variety of algorithms have been used and compared with the proposed model. There is a drastic improvement in the results obtained by using the above preprocessing and classification techniques. A lot of public datasets have been tested too. Table 1 gives information about the various datasets used in this research. The main novelty in the work is the usage of RandAugment for the augmentation of the data and the utilization of normalization-free network for the classification. Problems with batch normalization: batch normalization is a key component of most image classification models, but it has many undesirable properties. There can be discrepancies between the behavior of the network during training and testing times. While training, the network might have learned and trained to certain batches, which makes the network dependent on that batch-wise setup. So, it might not perform well when a single example is provided at inference. Batch normalization breaks the independence between examples within a batch. This means the examples selected in a batch are significant and lead us to two more prospects: Batch Size matters and inefficient Distributed training that will lead to the network cheating the loss function. To overcome these problems, normalization-free network is utilized and also, the comparison of NFNet with other state of the art image classification algorithms is mentioned in the paper.

Few recent studies have reported changes in X-ray images in patients at the onset of TB. Here, we review related literature which use AI and deep learning to diagnose this bacterial infection. Liu et al. [2] employed AlexNet and GoogleNet with shuffle sampling to classify TB from chest X-rays and achieved an accuracy of 85.68%. Hooda et al. [27] designed an ensemble of AlexNet, GoogleNet, and ResNet to detect TB. The models were trained from scratch and achieved an accuracy of 88.24%. The benchmark TB dataset (TBX11 K) was proposed by Liu et al. [26]. The authors compared the performance of various deep learning models to achieve simultaneous detection and classification with an accuracy of 88.2%. Hwang et al. [24] designed a modified AlexNet that was pretrained on ImageNet dataset to achieve TB classification. It achieved an accuracy of 90%. The pipeline data augmentation technique and ResNet18 model developed by Ghorakavi et al. [28] achieved an accuracy of 65.77181%. A D-CNN that involved demographic details along with images achieved better accuracy than I-CNN that considered only images in TB detection from chest X-rays [29]. Lakhani and Sundaram et al. [30] employed AlexNet and GoogleNet to detect TB. The ensemble of both gave an AUC score of 0.99. Nguyen et al. [31] proposed that ImageNet weights were insufficient for the modalities like X-Rays and discussed a new technique to obtain low level features by training the models in a multiclass multilabel scenario. Among the models trained, DenseNet-121 outperformed others by achieving an AUC score of 99% and 80% on Shenzhen and Montgomery datasets. Performance of pretrained AlexNet VGG16, VGG-19, and Xception ResNet 50 were compared in [32]. They identified that the features from shallow layers gave better results than deeper layers. Sivaramakrishnan et al. [25] employed InceptionV3 to obtain the classification of TB. They arrived at a conclusion that a supervised deep learning model trained from one population would not have the same diagnostic performance in another population. Hijazi et al. [33] proposed an ensemble of VGG16 and InceptionV3 which utilized the features extracted from original images of chest X-rays and canny edge detected images. The model with probability decision and variation of features led to improved TB detection. Pasa et al. [34] proposed a simple CNN model with five convolutional blocks to achieve the TB classification. They also employed saliency maps and grad-CAMs visualization techniques and discussed them from the radiologist’s perspective. VGG16, Artificial Neural Network (ANN), and a customised CNN were employed to classify between drug resistant and nondrug resistant TB [35]. The ANN outperformed other models as the size of the dataset was small. Vajda et al. [36] employed the atlas-based lung segmentation and feature extraction to obtain the sets of features that could differentiate normal chest.

X-rays from the TB suspicious ones. A neural network-based classifier was utilized to achieve the classification. A maximum area under the curve and accuracy of 99% and 97.03% was obtained with Montgomery and the Shenzhen dataset. An ensemble of classifiers by combining the Support Vector Machines (SVMs) trained using the features extracted from chest X-Rays utilizing GoogLenet, ResNet, and VggNet is proposed in [37]. The models performed extremely well in diagonising TB. In research by Yan et al. [38], ML was used to diagnose TB using CT images.

892 CT scans of patients were included. The overall classification accuracy obtained was 81.09% to 91.05%. The paper concluded that deep learning has a lot of scope to diagnose TB in the future. Deep learning based Mycobacteria detection was conducted in [39]. Two autopsy patients and 40 biopsy cases were used for this research. A 100% specificity was obtained by the algorithms. The sensitivity ranged from 29% to 86%. Podder et al. [40] used transfer learning to diagnose COVID-19 and other diseases. The Modified Xception classifier obtained an accuracy of 84.82%.

The dataset contained chest x-rays of patients. Mondal et al. [41] used an optimized InceptionResNetV2 to diagnose COVID-19. The dataset contained both COVID-19 and non COVID-19 CT images. A maximum accuracy of 96.18% was obtained. A review of various ML and DL algorithms for COVID-19 diagnosis was conducted by Mondal et al. [42]. 52 articles were considered for this extensive review. Results concluded that ResNet-18 and DenseNet 169 were the efficient algorithms. Bharathi et al. [43] developed “CO-ResNet,” an optimized algorithm which diagnoses COVID-19 from chest X-rays. A maximum accuracy of 99% was obtained which distinguished COVID-19 from other viral diseases. Bharathi et al. [44] used deep learning to detect lung infections using chest x-rays. Among all the algorithms, VDSNet performed best with 73%. Bharati et al. [45] used CNN and lightGBM to identify the lung carcinoma. ResNet 50 architecture was compared with different models. The metrics used were log loss and ROC curve.

2. Materials and Methods

In this paper, we propose a three-fold method aimed as follows:(1)Detect if a chest X-ray is related to a healthy patient or to a patient infected with tuberculosis.(2)To discriminate between sick (but not TB) and TB.(3)To highlight the affected areas in the chest X-ray symptomatic of TB.

2.1. Dataset Description

The study is carried on two sets. The first set is henceforth referred to as “Set 1” and the second set is henceforth referred to as “Set 2.” The model’s performance is tested by utilizing the two sets. The first set is referred as “Test Set 1” and the second set is referred as “Test set 2.”

Set 1: this set is comprised of the below datasets:(1)Tuberculosis X-ray (TBX11 K): the dataset [26] contains 11,200 chest X-rays from individual patients of different age groups and genders. Out of the 11,200 images, only 8400 images were provided with ground truths. Hence, they are considered for training and validation. This subset is split into 3800 (Healthy X-rays), 3800 (Sick but not TB X-rays), and 800 (TB X-rays). The images are in PNG format.(2)Montgomery: this dataset consists of images collected from the tuberculosis control program of the Department of Health and Human Services of Montgomery County, MD, USA. 80 X-Rays are normal and 58 X-Rays are abnormal with manifestations of tuberculosis. The images are in DICOM format.(3)Shenzhen: this dataset consists of X-ray collected by Shenzhen No. 3 Hospital in Shenzhen, Guangdong providence, China. The set consists of 326 normal X-Rays and 336 abnormal X-Rays [18]. The images are in JPEG format.(4)DatasetA + DatasetB: the images are collected from the National Institute of TB and respiratory diseases, New Delhi, India [19]. Dataset A includes 78 images for each class, showing normal lungs and others with various TB manifestations. Dataset B includes 75 images for each class, showing normal lungs and other TB manifestations.

The images are in DICOM format(i)Test Set 1: A separate held out set is utilized. The test set is composed of 1200 Healthy images, 1200 Sick but not TB images, and 2800 images belonging to TB. The set is retained as an online challenge [26]. All the images are in PNG format. Set 2: this set is comprised of the following datasets: Belarus, NIAID, and RSNA : the Belarus set [46] includes 306 CXR images belonging to TB positive cases collected from the National Institute of Allergy and Infectious Diseases, Ministry of Health, Republic of Belarus. The NIAID Set [47] consists of 2800 TB positive images collected from seven different countries. The RSNA set [48] consists of 3,094 normal images collected from the RSNA pneumonia detection challenge. Test set 2: Training set 2 is split into a 60-20-20 ratio. This set has 700 images under the normal category and 700 images under the TB category.

2.1.1. Augmentation Techniques and Regularization

To prevent the model from overfitting on the train test split, we utilized 4 layers of RandAugment [49] followed by conversion of the images to Grayscale (with 3 channels, where r = g = b) which prevented any colored X-rays after the RandAugments were done. RandAugment is an automated data augmentation method. The main goal of RandAugment is to remove the need for a separate search phase on a proxy task. The search space has two interpretable hyperparameters M and N. N represents the number of augmentation transformations to apply sequentially, and M denotes the magnitude for all the transformations. A number of works enumerated a policy of choosing which transformations to apply out of available transformations, and probabilities for applying each transformation. In this algorithm, to maintain image diversity and reduce the parameter space, learned policies and probabilities for applying each transformation are replaced with a parameter-free procedure of always selecting a transformation with uniform probability 1/K. K represents the number of transformation options. With only these two parameters, RandAugment can be utilized uniformly across different tasks and datasets. It matches or exceeds the performance of the other autoaugment techniques. In the proposed work, a constant value of 0.5 for “M” (magnitude hyper-parameter) is chosen.

Also, the augmentations are applied at every epoch, effectively giving our model new images to train/validate against at each epoch. Augmentations are also applied on the validation set due to the nature of random train/validation split. This resulted in the proposed model to perform better on the test set, than it did on the validation during training. These operations provided very strong explicit regularization. However, to further achieve better model generalization, more techniques are employed. In Figure 2, various augments chosen using RandAugment can be seen.

(a)

(b)

(c)

(d)

(e)

(f)

(g)

(h)

(i)

2.2. Progressive Resizing

The size of an image plays a crucial role in determining the model’s performance. Images with smaller dimensions lead to a small network capacity and thus requires lesser regularization. On the other hand, images with larger dimensions require extensive computations and are more prone to be overfitted. Thus, when the model is being trained with variable image sizes, the strength of regularization should be adjusted accordingly to boost the model’s accuracy and improve its performance i.e., an image with a smaller dimension works better with weaker regularization and weaker augmentation techniques. Similarly, images with larger dimensions work better with a stronger extent of regularization and augmentation techniques to defeat overfitting. The psuedocode for progressive resizing is described in Algorithm 1.

(i)	Require image, resolution, counter, currEpoch
(ii)	if counter-1>0 then
(iii)	image ← resize(image, resolution - 32 X (counter-1))
(iv)	i ← 0
(v)	for i = 4-counter do
(vi)	end
(vii)	image ← randAugment (image)
(viii)	end
(ix)	return image

3. Classification Using Normalization-Free Network

Artificial Intelligence has impacted medical diagnosis in a positive way. The models have been deployed in various hospitals and medical facilities to assist the doctors and radiologists. It also offers a second opinion and stabilizes the conclusion derived from the X-ray images.

The batch normalization technique is used to scale the activations as they pass through the hidden layers and helps in restricting them to a certain range of values. This is achieved by inserting normalization layers after every hidden layer. Despite its several advantages, the batch norm was not the most appropriate alternative as it did not help us in achieving the best possible performance for our specific use case.

One issue always encountered with batch normalization enabled models is the performance discrepancy during training and testing. During the training process, the batch norm technique requires the model to train over numerous batches of preferably large size and the statistics (mean and variance) are computed corresponding to the minibatch.

This tends to make the model batch-dependent. Hence, when fewer images, lesser in comparison to the batch size, are put to test on the model, and the results produced are often inaccurate and deviate from the ground truth. For instance, the batch normalization-enabled model would be successful in training effectively over the X-ray images present in a large batch size of 128, but, when it would be put to test only on a single X-ray image, the statistics (mean and variance) of the test image might vary significantly from the minibatch statistics, which would ultimately lead to erroneous results.

Another issue faced while employing the batch normalization technique is the slower prediction time and extra computation. To tackle the problem of changing ranges of weights between the layers and stabilizing the learning process, the batch norm technique introduces a normalization operation after every hidden layer. Although the desirable results for the above problems are attained, the training time gets compromised. Hence, the normalizing operation after every hidden layer increases the model run-time as well as the computational resources employed by it.

For the reasons stated above, we needed to utilize a network that would not only provide us with robust training performance and highly accurate results but also be time efficient. The normalization-free network achieves significantly better performance than most of its competitors (e.g., EfficientNet-B7) by eliminating the use of batch normalization and slightly modifying the architecture of the normalization-free ResNets [50]. Apart from being lightweight and training efficiently on larger batch sizes, the NFNet utilizes residual branches and Adaptive Gradient Clipping (AGC) that bolster the model’s performance [50].(1)Approach towards residual branches: this component of the NFNet architecture is its “normalization-free” feature. The residual branches of the NFNet architecture make use of 2 scalars, namely α and β [50]. These scalar quantities help in scaling the activations at the beginning and the end of the residual branch, thus restricting the activations to a certain range. This feature of the NFNet is analogous to the scaling operation done by the normalization layers inserted after every hidden layer in the batch normalization enabled models. Hence, the NFNet adopts this merit from the batch normalization technique to compensate for its absence.(2)Utilization of adaptive gradient clipping: during the backpropagation process, when the norm of the gradient gets bigger as it passes through each layer such that there is an exponential increase in its magnitude, the weights get updated inaccurately and consequently, and the network performance gets hampered. This is known as the exploding gradient issue and it is extremely critical to solving it to improve the overall performance of the model.

The gradient clipping technique is a popular option utilized to tackle exploding gradients. During the training process, when there is a certain norm of a gradient that is very high such that it surpasses a threshold value “lambda” (symbol needs to be inserted), the norm is said to be scaled to the threshold (formula associated with it to be added). Thus, the maximum possible value for a norm of a gradient is the threshold value lambda and any value above the threshold is clipped. For a gradient vector G = ∂L/∂θ, where L denotes the loss and denotes a vector with all model parameters, the standard clipping algorithm clips the gradient before updating as shown in (1).

However, there are a few drawbacks associated with gradient clipping. The threshold value is very sensitive, and therefore, its appropriate selection is of paramount importance. Secondly, every high gradient jump which surpasses the threshold value is said to be clipped. But, while clipping, the weight associated with the corresponding gradient jump is not taken into account. There might be a few instances where the high gradient jump is justified by a significant corresponding weight, but, since the weight factor is not evaluated, all such gradients are also clipped.

As an improvisation to the existing gradient clipping technique, the adaptive gradient clipping (AGC) takes into account the weight associated with a particular gradient’s norm during the filtering process. The AGC is computed as the ratio of the norm of the gradient to the norm of the weight associated with that particular layer. It measures how much the weights are affected for a single gradient descent step. For instance, if the value of the norm associated with a certain gradient is high enough such that it surpasses the threshold, but the weight associated with the same is significant, then the high jump is said to be justified and the gradient is not clipped. However, if the weight associated with the abnormal rise in the norm of the gradient is not sufficient, then that particular gradient is scaled to the threshold value and is said to be clipped. Hence, the weight corresponding to the particular norm of a gradient plays a crucial role in the clipping decision as shown in (2).where W^l ∈ R^N×M denotes the weight matrix of the l^th layer, G^l ∈ R^N×M denotes the gradient with respect to W^l, and the Frobenius norm is denoted by ∥·∥_F.

Additionally, the AGC serves to be advantageous for our specific use case because it significantly reduces the probability of exploding gradients occurring during the training process by preventing the imprecise updation of the weights. Accurate classification of X-ray images is of prime importance as it is the question of life and death for a particular patient; any slight error can lead to deleterious circumstances. Although batch normalization was not specifically designed to tackle the exploding gradient issue, it was able to mitigate its effects, but not eliminate it. AGC on the other hand was specifically devised to tackle exploding gradient issues and does a much better job in reducing the erroneous effects of gradient explosion as compared to batch norm [51]. The entire flowchart of the proposed model is described in Figure 3. Figure 4 explains the architecture of various deep learning networks.

(a)

(b)

(c)

We denote h_i ∈ R^m×n to be the outputs of previous block and α = 0.2 be a constant scale factor.

Nontransitional block.

The matrix X ∈ ^m×n, denotes the output of a nontransitional block.

λ is the composition of operations on h_i that when summed with the original input give the output X i.e.,

We can denote λ as follows: λ = fk ◦ fk−1 ◦··· ◦ f1(hi) where (f_k: k = 1…11).

The composition of operations are as follows: (1) f₁ = (1/β)h_i. Here, input of previous block is scaled by a factor 1/β. Where β_i = ^pVar (h_i) and Var (h_i+1) = Var (h_i) + α². β is the standard deviation of the inputs h_i. (2) For i = 2...n − 2, if i is an even number: fi = ScaledAct (x) Otherwise: fi = WSConv (x).

The scaled activation function [50, 52] (the Gamma Activation) is a ReLU activation scaled by a constant factor .

WSConv [52] is the standard weight standardization function: .

This is done to reparameterize original weights ,

where ui = (1/N)Pj Wij and σ2 = (1/N)Pj(Wij − ui)2. (3) f10 = SE(x), which is the queeze and Execitation block. (4) f11 = αx, (scalar-vector multiplication), where α (as defined earlier) is a scalar value that regulates the rate at which the variance of the activation increases.

Transitional block.

The transitional block is almost identical to the previously described in nontransitional block, with a few changes.

Here, instead of summing outputs of a series of operations λ(h_i) with the previous layers input directly, the series of functions is as follows:where after scaling the inputs by (1/β) feeding the product into the scaled activation (Gamma activation) function.

The matrix is first reduced by average pooling and then expanded again by standard weight standardization.

The output of the transitional block is Y ∈ ^m×n = λ(h_i) + G(h_i).

The details of the training and validation datasets are described in Table 2 and figuratively given in Figure 5. The various training parameters for the NFNet model are explained in Table 3.

4. Performance Criteria for Classification Using Normalization-Free Network

The performance of different models for testing dataset was evaluated after the completion of training and validation phase and was compared using the following performance metrics: Accuracy, Sensitivity, Specificity, Area under 255 Curve (AUC), Average Precision, and Average Recall. TP represents true positive cases, TN represents true negative cases, FN represents false negative cases, and FP represents the number of false positive cases. The metrics are defined below:(1)Accuracy: the number of positive and negative TB cases identified correctly among all classified cases. It is calculated using the equation given below:(2)Sensitivity: it is the number of positive TB cases identified accurately. It is also called recall. When the number of false negative cases are minimum, the sensitivity is extremely high. It is described using the formula given below:(3)Specificity: it is the number of negative TB cases identified correctly. When the number of false positives are minimum, the obtained specificity will be maximum. It is calculated using the formula given below:(4)AUC (Area Under Curve): the area under the curve when the graph is plotted between the true positive rate and false positive rate. When the AUC is high, it means the model is classifying the instances correctly.(5)Average precision: it summarizes all the values of the precision-recall curve into a value. It also represents the mean of all the precision’s obtained. It is calculated using the formula:(6)Average Recall: the mean of recalls calculated from thresholds of 0.5 to 1 to summarize the distribution. It is calculated using the formula:

4.1. Visualization Technique: Score-CAM

To highlight the areas in the chest X-ray symptomatic of TB, we utilize the Score-CAM [53] technique.

The Score-CAM visualization technique, built on top of the CAM-based visualization method, follows a perturbation 265-based approach. This technique comprises two stages; the first stage passes the input images into a CNN and generates the activation maps. Subsequently, the maps are upsampled as they are smaller in dimensions as compared to the input image. In the second stage, the activation maps generated are pointwise multiplied with the input image and normalised. The normalization process significantly improves the discriminative ability of the model. The masked inputs are fed to CNN and corresponding scores of the specified target class are generated. This process is repeated 270 until it has been applied to all the generated maps. The Score-CAM metric is given aswhere

Here, C(.) denotes the channel wise increase in confidence for a particular activation map. The ReLU function is used to eliminate those features which have had no impact on the target class. The proposed work utilizes Score-CAM as it does not require mask sampling or any process for optimisation. Gradients have not been utilized in the course of heat map generation. The removal of global average pooling layer (used in the class activation mapping technique) eliminates the need to retrain the entire process or make any changes to the network structure.

5. Experimental Results and Analysis

In this section, we evaluate the models on the parameters discussed in the previous section. The Score-CAM visualization is also explored in depth. Furthermore, the results are also classified using other deep learning models for TBX11k and Kaggle dataset.

5.1. TB Classification

TB classification using the proposed normalization-free-network model is the main objective of this research. Figure 6 describes the confusion matrix obtained by the two datasets (training + validation). Figure 6(a) represents the confusion matrices for the training data. The matrix on the top represents the TBX11K dataset which consist of three classes namely: healthy, infection (but not TB), and TB. The bottom matrix is of the Kaggle dataset Test dataset 285 (2) which consists of healthy and TB images. These confusion matrices are obtained after training the normalization-free network model. Figure 6(b) represents the confusion matrices of the above datasets, but on the validation set. As we can see, the false positive and false negative values are extremely low (NonDiagonal elements). This classifier promises us a good accuracy. All the metrics such as accuracy, precision, recall, and others can be effectively calculated using the confusion matrix.

(a)

(b)

Figure 7 represents the accuracies and losses against the number of epochs for the training and validation sets. From the plots, it can be observed that there is no overfitting since the accuracies and losses are almost similar between the training and test datasets. Further various deep learning architectures were used to classify the datasets along with our proposed model.

(a)

(b)

The Score-CAM technique was utilized to highlight the regions of the lungs affected by TB. This chest visualization-295 technique can be used to highlight the abnormalities in the specific region in the lungs, aiding the doctor to understand the region of interest. As discussed in the previous section, this process consists of two stages. CNN is used in the beginning to generate activation maps. Furthermore, these activation maps are multiplied with the initial image using normalization. The normalization process is extremely important to discriminate between the various image classes. These modified images are again sent to the model for classification. All the generated maps are subjected to 300 of this procedure for accurate analysis. Figure 8 shows the visual analysis of the chest X-ray. The first two rows represent the X-rays of a TB-infected patient. The last two rows are the X-rays of patients infected with other lung diseases (not TB). The first column represents the initial X-ray. The doctors have examined these x-rays and have labelled the region of interest (labelling). This is represented in the second column. The third column represents the marking of the region of interest by the Score-CAM algorithm. From the figure, it is observed that the algorithm identifies the region of interest accurately using a heat map (matches the ground truth given by the domain experts.) However, in some conditions, the heat maps generated can be wrong. This is depicted using Figure 9. The first two rows represent TB cases. The last two rows represent other lung diseases (not TB). The ground truths (labels) by the doctors are present in the second column. From the figure, it is clearly inferred that the generated heat maps are not the same as the ground truths (wrong classification). The Score-CAM is an effective algorithm, but some false positive and false 310 negative cases are observed.

(a)

(b)

(c)

(a)

(b)

(c)

The data was split into training and testing in the ratio of 80:20. The performance of the models are given in Tables 4 and 5. ResNet-18 is a highly efficient deep learning network which consists of 18 different layers. Millions of images can be easily loaded in this network. It can also classify images into a variety of classes. Furthermore, it is already trained on the ImageNet data. This model obtained an accuracy, AUC, sensitivity, specificity, average 315 precision, and average recall of 91.01%, 95.69%, 76.82%, 96.08%, 89.48%, and 88.75%, respectively, on the TBX11k dataset. For the Kaggle dataset, the obtained accuracy, AUC, sensitivity, specificity, average precision, and average recall are 90%,94%,72%,95%,87%, and 86.25%, respectively. ResNet50 is a deep residual network which is 50 layers deep. The network is stacked upon each other just like other artificial neural networks. This neural network is pretrained on the ImageNet dataset. The accuracy, AUC, sensitivity, specificity, average precision, and average recall on the TBX11k dataset were 98.76%, 87.02%, 96.99%, 93.67%, and 93.6%, respectively. For the Kaggle dataset, the obtained accuracy, AUC, sensitivity, specificity, average precision, and average recall were 92.61%, 97.6%, 84.02%, 96.88%, 92.41%, and 92.1%, respectively.

The DenseNet-121 is known to have 120 convolutional layers and four average pooling layers. The weights are spread over multiple inputs for optimal accuracy. These networks were specifically created to counter the vanishing gradient problem. The model obtained an accuracy, AUC, sensitivity, specificity, average precision, and average recall of 98.0%, 94.82%, 71.41%, 95.89%, 86.85%, and 85.13%, respectively. For the Kaggle dataset, the accuracy, AUC, sensitivity, specificity, average precision, and average recall obtained were 88.0%, 94.82%, 71.41%, 95.89%,86.85%, and 85.13% respectively. Another important CNN model is the DenseNet-201 which consists of 201 layers. It has been already trained by the ImageNet database and can effectively predict upto 1000 classes. The accuracy, AUC, sensitivity, 330 average precision, and average recall were 92.64%, 97.23%, 79.91%, 97.18%, 91.64%, and 90.6%, respectively, for the TBX11k multiclassification dataset. For the Kaggle dataset, the obtained accuracy, AUC, sensitivity, specificity, average precision, and average recall were 90.11%, 95.14%, 79.81%, 94.21%, 91.22%, and 80.45%, respectively.

InceptionV3 is a deep learning model used to classify images at a high accuracy rate. It includes both symmetric and asymmetric building neurons, including convolutions layer, max pooling, average pooling, drop outs, and fully connected layers. Softmax algorithm is used to compute the model loss. In this network, batch normalization is applied to the activation inputs. The InceptionV3 was able to obtain an accuracy, AUC, sensitivity, specificity, average precision, and average recall of 89.58%, 94.95%, 69.4%, 97.54%, 89%, and 86.21%, respectively. For the Kaggle dataset, the accuracy, AUC, sensitivity, specificity, average precision, and average recall obtained were 88.62%, 91.25%, 65.21%, 94.31%, 86.28%, and 84.77%, respectively. EfficientNet B7 is a rethinking scaling CNN. It returns an image classification model using transfer learning. This algorithm was developed by a company named AutoML. It also uses a compound coefficient to uniformly scale all the dimensions to its resolution. The obtained accuracy, AUC, sensitivity, specificity, average precision, and average recall were 84.07%, 73.82%, 51.78%, 95.86%, 82.14%, and 78.39%, respectively, for the TBX11k dataset. For the Kaggle dataset, the obtained accuracy, AUC, sensitivity, specificity, average precision, and average recall are 83.21%, 74.65%, 84.32%, 93.21%, 81.31%, and 75.45%, respectively. The proposed normalization-free network was able to perform better than all the models. The accuracy, sensitivity, specificity, average precision, and average recall obtained by the base models were 96.91%, 99.38%, 91.81%, 98.42%, 96.33%, and 96.1%, respectively. This proves that the model is highly efficient in classifying TB. For the binary classification dataset (Kaggle), the obtained accuracy, AUC, sensitivity, specificity, average precision, and average recall are 95.91%, 98.32%,91.78%, 91.67%, 95.33%, and 91.1%. Figure 10 and Figure 11 describe the losses obtained during training and validation for the two datasets.

An outline of comparison with previous literature-based approaches on the TB datasets is compared. The performance is compared with regards to the following measures: accuracy, AUC (TB), sensitivity, specificity, average precision ,and average recall. In research by Li et al. [26], CNN was used to diagnose TB using chest X-rays. AlexNet and GoogleNet were the models used. An accuracy of 85.08% was obtained by the classifiers. Hooda et al. [27] used three architectures: ResNet, GoogleNet, and AlexNet to diagnose TB. The models were further ensembled together to obtain an accuracy and AUC of 88.24% and 93%, respectively. In an article by Liu et al. [26], usage of image-based classifiers for TB diagnosis was considered. The accuracy, sensitivity, specificity, and AUC are 88.2%,88.4%, 89.5% and 93.8%, respectively. Furthermore, TB screening was performed in [23] using deep learning based on chest X-ray images. Three datasets were considered and the AUC obtained by them were 96%, 93%, and 88%, respectively. The TBNet model was created in [28] which diagnosed TB using deep learning models. Mirroring, rotation, and other augmentation techniques were used in the research. However, the ResNet architecture was only able to deliver an accuracy of 81%. Our best model was able to obtain an accuracy, sensitivity, and specificity of 97%, 92%, 99% and respectively. The performance of the comparative researches is described in Table 5.

Tuberculosis is a dangerous disease and it must be identified early to prevent the onset of severe symptoms. AI can be used to diagnose tuberculosis at a faster rate. These models can further help the doctors and radiologists to come to a decision. The classifiers have a tremendous potential in healthcare fields in the near future (Table 6).

6. Conclusion

Tuberculosis is a dangerous bacterial disease which affects the lungs in the human body. It is very important to diagnose this infection early since appropriate treatments can be provided. Computer Aided Diagnosis is a trending topic in Medical Artificial Intelligence. In this research, deep learning-assisted TB diagnosis is performed using normalizer-free network. For augmentation, RandAugment was used to convert the images to gray scale. Further, progressive resizing is used to perform automated preprocessing. Adaptive grading clipping is used to tackle the problem of exploding gradients in this research. A variety of models have been tested and our models achieved an accuracy, AUC, sensitivity, specificity, average precision, and average recall of 98%, 99%, 92%,99%,97%, and 96.1%, respectively. Additionally, a technique called the Score-CAM was used to draw inference from the chest X-rays. Further, the model was compared with the other state-of-art research studies to prove its novelty and superiority. The classifiers can be extremely useful in healthcare and will assist the doctors and medical professionals in performing accurate diagnosis.

In the future, General Adversarial Networks can be utilized to handle data imbalance. This will further boost the efficiency of the model. Chest CT Scan images can be collected from hospitals for computer-aided diagnosis in the near future. The models should be tested on other TB datasets to prove its efficacy. This will make the models more trustworthy. The system can be made user friendly and medical staff can use the models to aid the diagnostic procedure. The deep learning models can also be used to diagnose other diseases such as COVID-19, malaria, liver disease, isochronic heart disease, chronic kidney disease, cancers, and others.

Data Availability

The data used to support the findings of this study are available from author Krishnaraj Chadaga upon request ([email protected]).

Conflicts of Interest

The authors declare that they have no conflicts of interest.

Authors’ Contributions

Sandeep Kautish, Gaurav Dhiman, and Krishna Prakasha proposed the method; Vasund hara Acharya and Krishnaraj Chadaga wrote the paper; Pranshu Agarwal and Ankit Choraria developed the methodology; Wattana Viriyasitavat proof read the paper; Sushobhitha M and Sowjanya annoted the medical images and Srikanth Prabhu analyzed the results.

References

W H O, “Global tuberculosis report 2020,” Tech. Rep., World Health Organization, Geneva, Switzerland, 2020, Executive summary.
View at: Google Scholar
C. Liu, Y. Cao, M. Alcantara et al., “Tx-cnn: detecting tuberculosis in chest x-ray images using convolutional neural network,” in Proceedings of the 2017 IEEE international conference on image processing (ICIP), pp. 2314–2318, IEEE, Beijing, China, September 2017.
View at: Google Scholar
S. Chan, V. Reddy, B. Myers, Q. Thibodeaux, N. Brownstone, and W. Liao, “Machine learning in dermatology: Current applications, opportunities, and limitations,” Dermatologic Therapy, vol. 10.
View at: Google Scholar
S. S. Han, I. J. Moon, W. Lim et al., “Keratinocytic skin cancer detection on the face using region-based convolutional neural network,” JAMA Dermatology, vol. 156, no. 1, pp. 29–37, 2020, arXiv:.
View at: Publisher Site | Google Scholar
A. Esteva, B. Kuprel, R. A. Novoa et al., “Dermatologist-level classification of skin cancer with deep neural networks,” Nature, vol. 542, no. 7639, pp. 115–118, 2017.
View at: Publisher Site | Google Scholar
M. A. Noyan, M. Durdu, and A. H. Eskiocak, “TzanckNet: a convolutional neural network to identify cells in the cytology of erosive-vesiculobullous diseases,” Scientific Reports, vol. 10, no. 1, Article ID 18314, 2020.
View at: Publisher Site | Google Scholar
R. Pivovarov and N. Elhadad, “Automated methods for the summarization of electronic health records,” Journal of the American Medical Informatics Association, vol. 22, no. 5, pp. 938–947, 2015.
View at: Publisher Site | Google Scholar
M. Yang, “Painful conversations: therapeutic chatbots and public capacities,” Communication and the Public, vol. 5, no. 1-2, pp. 35–44, 2020.
View at: Publisher Site | Google Scholar
K. Rarhi, A. Bhattacharya, A. Mishra, and K. Mandal, “Automated medical chatbot,” SSRN Electronic Journal.
View at: Publisher Site | Google Scholar
F. Amato, S. Marrone, V. Moscato, G. Piantadosi, A. Picariello, and C. Sansone, Chatbots Meet Ehealth: Automatiz- Ing Healthcare, University of Naples Federico, Italy.
A. Sharma and P. K. Mishra, “Deep learning approaches for automated diagnosis of covid-19 using imbalanced training cxr data,” in Proceedings of the International Conference on Advanced Network Technologies and Intelligent Computing, pp. 453–472, Springer, Varanasi, India, December 2021.
View at: Google Scholar
J. P. Queralta, T. N. Gia, H. Tenhunen, and T. Westerlund, “Edge-ai in lora-based health monitoring,” Fall detection system with fog computing and lstm recurrent neural networks, vol. 604, 2019.
View at: Publisher Site | Google Scholar
A. Malawista, X. Wang, M. Trentalange, H. G. Allore, and R. R. Montgomery, “Coordinated expression of tyro3, axl, and mer receptors in macrophage ontogeny,” Macrophage (Houst), vol. 3, 2016.
View at: Publisher Site | Google Scholar
A. Sharma and P. K. Mishra, “Performance analysis of machine learning based optimized feature selection approaches for breast cancer diagnosis,” International Journal of Information Technology, vol. 14, no. 4, pp. 1949–1960, 2022.
View at: Google Scholar
S. Abdul Gafoor, N. Sampathila, S. Ks, and S. K S, “Deep learning model for detection of covid-19 utilizing the chest x-ray images,” Cogent Engineering, vol. 9, no. 1, Article ID 2079221, 2022.
View at: Publisher Site | Google Scholar
K. Chadaga, S. Prabhu, K. V. Bhat, S. Umakanth, and N. Sampathila, “Medical diagnosis of covid-19 using blood tests and machine learning,” Journal of Physics: Conference Series, IOP Publishing, vol. 2161, Article ID 012017, 2022.
View at: Google Scholar
L. Hogeweg, C. I. Sanchez, P. Maduskar et al., “Automatic detection of tuberculosis in chest radiographs using a combination of textural, focal, and shape abnormality analysis,” IEEE Transactions on Medical Imaging, vol. 34, no. 12, pp. 2429–2442, 2015.
View at: Publisher Site | Google Scholar
S. Jaeger, S. Candemir, S. Antani, Y.-X. J. Wang, P.-X. Lu, and G. Thoma, “Two public chest x-ray datasets for´ computer-aided screening of pulmonary diseases,” Quantitative Imaging in Medicine and Surgery, vol. 4, no. 6, pp. 475–477, 2014.
View at: Publisher Site | Google Scholar
A. Chauhan, D. Chauhan, and C. Rout, “Role of gist and phog features in computer-aided diagnosis of tuberculosis without segmentation,” PLoS One, vol. 9, no. 11, Article ID e112980, 2014.
View at: Publisher Site | Google Scholar
B. P. Health, “Belarus tuberculosis portal,” 2021, http://tuberculosis.by/.
View at: Google Scholar
T. Rahman, A. Khandakar, M. A. Kadir et al., “Reliable tuberculosis detection using chest x-ray with deep learning, segmentation and visualization,” IEEE Access, vol. 8, pp. 191586–191601, 2020.
View at: Publisher Site | Google Scholar
Niaid, “TB portal program dataset,” Article ID 45502, 2021, https://data.tbportals.niaid.nih.gov/.
View at: Google Scholar
J. Shiraishi, S. Katsuragawa, J. Ikezoe et al., “Development of a digital image database for chest radiographs with and without a lungnodule: receiver operating characteristic analysis of radiologists’ detection of pulmonary nodules,” American Journal of Roentgenology, vol. 174, no. 1, pp. 71–74, 2000.
View at: Publisher Site | Google Scholar
S. Hwang, H.-E. Kim, J. Jeong, and H.-J. Kim, “A novel approach for tuberculosis screening based on deep convo- lutional neural networks,” Medical imaging 2016: Computer-Aided Diagnosis, International Society for Optics and Photonics, vol. 9785, Article ID 97852W, 2016.
View at: Google Scholar
S. Sathitratanacheewin, P. Sunanta, and K. Pongpirul, “Deep learning for automated classification of tuberculosisrelated chest x-ray: dataset distribution shift limits diagnostic performance generalizability,” Heliyon, vol. 6, no. 8, Article ID e04614, 2020.
View at: Publisher Site | Google Scholar
Y. Liu, Y.-H. Wu, Y. Ban, H. Wang, and M.-M. Cheng, “Rethinking computer-aided tuberculosis diagnosis,” in Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition, pp. 2646–2655, WA, USA, June 2020.
View at: Google Scholar
R. Hooda, A. Mittal, and S. Sofat, “Automated tb classification using ensemble of deep architectures,” Multimedia Tools and Applications, vol. 78, no. 22, pp. 31515–31532, 2019.
View at: Publisher Site | Google Scholar
R. S. Ghorakavi, Tbnet: Pulmonary Tuberculosis Diagnosing System Using Deep Neural Networks, 2019, https://arxiv.org/abs/1902.08897.
S.-J. Heo, Y. Kim, S. Yun et al., “Deep learning algorithms with demographic information help to detect tuberculosis in chest radiographs in annual workers’ health examination data,” International Journal of Environmental Research and Public Health, vol. 16, no. 2, p. 250, 2019.
View at: Publisher Site | Google Scholar
P. Lakhani and B. Sundaram, “Deep learning at chest radiography: automated classification of pulmonary tuberculosis by using convolutional neural networks,” Radiology, vol. 284, no. 2, pp. 574–582, 2017.
View at: Publisher Site | Google Scholar
Q. H. Nguyen, B. P. Nguyen, S. D. Dao et al., “Deep learning models for tuberculosis detection from chest x-ray images,” in Proceedings of the 2019 26th International Conference on Telecommunications (ICT), pp. 381–385, IEEE, Hanoi, Vietnam, April 2019.
View at: Google Scholar
R. Sivaramakrishnan, S. Antani, S. Candemir et al., “Comparing deep learning models for population screening using chest radiography,” Medical Imaging 2018: ComputerAided Diagnosis, International Society for Optics and Photonics, vol. 10575, Article ID 105751E, 2018.
View at: Google Scholar
M. H. A. Hijazi, S. Kieu Tao Hwa, A. Bade, R. Yaakob, and M. Saffree Jeffree, “Ensemble deep learning for tuberculosis detection using chest x-ray and canny edge detected images,” IAES International Journal of Artificial Intelligence, vol. 8, no. 4, p. 429, 2019.
View at: Publisher Site | Google Scholar
F. Pasa, V. Golkov, F. Pfeiffer, D. Cremers, and D. Pfeiffer, “Efficient deep network architectures for fast chest x-ray tuberculosis screening and visualization,” Scientific Reports, vol. 9, no. 1, pp. 6268-6269, 2019.
View at: Publisher Site | Google Scholar
S. Jaeger, O. H. Juarez-Espinosa, S. Candemir et al., “Detecting drug-resistant tuberculosis in chest radiographs,” International Journal of Computer Assisted Radiology and Surgery, vol. 13, no. 12, pp. 1915–1925, 2018.
View at: Publisher Site | Google Scholar
S. Vajda, A. Karargyris, S. Jaeger et al., “Feature selection for automatic tuberculosis screening in frontal chest radiographs,” Journal of Medical Systems, vol. 42, no. 8, pp. 146–211, 2018.
View at: Publisher Site | Google Scholar
U. Lopes and J. F. Valiati, “Pre-trained convolutional neural networks as feature extractors for tuberculosis detection,” Computers in Biology and Medicine, vol. 89, pp. 135–143, 2017.
View at: Publisher Site | Google Scholar
C. Yan, L. Wang, J. Lin et al., “A fully automatic artificial intelligence–based ct image analysis system for accurate detection, diagnosis, and quantitative severity evaluation of pulmonary tuberculosis,” European Radiology, vol. 32, no. 4, pp. 2188–2199, 2022.
View at: Publisher Site | Google Scholar
Y. Zaizen, Y. Kanahori, S. Ishijima et al., “Deep-learning-aided detection of mycobacteria in pathology specimens increases the sensitivity in early diagnosis of pulmonary tuberculosis compared with bacteriology tests,” Diagnostics, vol. 12, no. 3, p. 709, 2022.
View at: Publisher Site | Google Scholar
P. Podder, S. Bharati, M. Mondal, and A. Khamparia, “Rethinking the transfer learning architecture for respiratory diseases and covid-19 diagnosis,” Biomedical Data Analysis and Processing Using Explainable (XAI) and Responsive Artificial Intelligence (RAI), Springer, Berlin, Germany, pp. 105–121, 2022.
View at: Google Scholar
M. R. H. Mondal, S. Bharati, and P. Podder, “Co-irv2: optimized inceptionresnetv2 for covid-19 detection from chest ct images,” PLoS One, vol. 16, no. 10, Article ID e0259179, 2021.
View at: Publisher Site | Google Scholar
M. R. H. Mondal, S. Bharati, and P. Podder, “Diagnosis of covid-19 using machine learning and deep learning: a review,” Current Medical Imaging Formerly Current Medical Imaging Reviews, vol. 17, no. 12, pp. 1403–1418, 2021.
View at: Publisher Site | Google Scholar
S. Bharati, P. Podder, M. R. H. Mondal, and V. S. Prasath, “Co-resnet: optimized resnet model for covid-19 diagnosis from x-ray images,” International Journal of Hybrid Intelligent Systems, vol. 17, no. 1-2, pp. 71–85, 2021.
View at: Publisher Site | Google Scholar
S. Bharati, P. Podder, and M. R. H. Mondal, “Hybrid deep learning for detecting lung diseases from x-ray images,” Informatics in Medicine Unlocked, vol. 20, Article ID 100391, 2020.
View at: Publisher Site | Google Scholar
S. Bharati and P. Podder, “Performance of cnn for predicting cancerous lung nodules using lightgbm,” Artificial Intel-ligence for Data-Driven Medical Diagnosis, vol. 1, pp. 1–18.
View at: Google Scholar
B. P. Health, 2020, http://tuberculosis.by/.
A. Rosenthal, A. Gabrielian, E. Engle et al., “The tb portals: an open-access, web-based platform for global drug-resistant-tuberculosis data sharing and analysis,” Journal of Clinical Microbiology, vol. 55, no. 11, pp. 3267–3282, 2017.
View at: Publisher Site | Google Scholar
Kaggle, “RSNA pneumonia detection challenge,” 2018, https://www.kaggle.com/c/rsna-pneumonia/.
View at: Google Scholar
E. D. Cubuk, B. Zoph, J. Shlens, and Q. V. Le, “Randaugment: practical automated data augmentation with a re- duced search space,” in Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition Workshops, pp. 702-703, WA, USA, June 2020.
View at: Google Scholar
A. Brock, S. De, S. L. Smith, and K. Simonyan, “High-performance large-scale image recognition without normalization,” 2021, https://arxiv.org/abs/2102.06171.
View at: Google Scholar
T. Chen, Z. Zhang, X. Ouyang, Z. Liu, Z. Shen, and Z. Wang, “Training binary neural networks without batch normalization,” 2021, https://arxiv.org/abs/2104.08215.
View at: Google Scholar
A. Brock, S. De, and S. L. Smith, “Characterizing signal propagation to close the performance gap in unnormalized resnets, CoRR abs/2101,” Article ID 08692, https://arxiv.org/abs/2101.08692.
View at: Google Scholar
H. Wang, Z. Wang, M. Du et al., “Score-cam: score-weighted visual explanations for convolutional neural networks,” in Proceedings of the IEEE/CVF Conference on Computer Vision and Pattern Recognition Workshops, pp. 24-25, WA, USA, June 2020.
View at: Google Scholar

Copyright

Copyright © 2022 Vasundhara Acharya et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

PDF Download Citation

Download other formats

Order printed copies

Views

2621

Downloads

1146

Citations