Table of Contents Author Guidelines Submit a Manuscript
Complexity
Volume 2017, Article ID 4376809, 17 pages
https://doi.org/10.1155/2017/4376809
Research Article

Fuzzy and Control Charts: A Data-Adaptability and Human-Acceptance Approach

1Department of Industrial Engineering and Management, National Kaohsiung University of Applied Sciences, Kaohsiung 80778, Taiwan
2Office of Scientific Research, Lac Hong University, Dong Nai, Vietnam
3Department of Industrial Engineering and Management, Cheng Shiu University, Kaohsiung 83347, Taiwan
4Dong Nai Technology University, Dong Nai, Vietnam

Correspondence should be addressed to Dinh-Chien Dang; moc.liamg@79btkd.neihc

Received 11 October 2016; Revised 20 March 2017; Accepted 27 March 2017; Published 30 April 2017

Academic Editor: Thierry Floquet

Copyright © 2017 Ming-Hung Shu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. D. C. Montgomery, Statistical Quality Control—A Modern Introduction, John Wiley & Sons, Singapore, 2013.
  2. R. E. Walpole, R. H. Myers, S. L. Myers, and K. Ye, Probability and Statistics for Engineers and Scientists, Pearson, 9th edition, 2012.
  3. J. R. Evans and W. M. Lindsay, The Management and Control of Quality, South-Western College Publishing, Mason, Ohio, USA, 8th edition, 2011.
  4. M.-H. Shu, T.-L. Nguyen, and B.-M. Hsu, “Fuzzy MaxGWMA chart for identifying abnormal variations of on-line manufacturing processes with imprecise information,” Expert Systems with Applications, vol. 41, no. 4, pp. 1342–1356, 2014. View at Publisher · View at Google Scholar · View at Scopus
  5. K.-P. Lu, S.-T. Chang, and M.-S. Yang, “Change-point detection for shifts in control charts using fuzzy shift change-point algorithms,” Computers and Industrial Engineering, vol. 93, pp. 12–27, 2016. View at Publisher · View at Google Scholar · View at Scopus
  6. M. Gülbay, C. Kahraman, and D. Ruan, “α-cut fuzzy control charts for linguistic data,” International Journal of Intelligent Systems, vol. 19, no. 12, pp. 1173–1195, 2004. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  7. S. Senturk and N. Erginel, “Development of fuzzy X-~-R~ and X-~-S~ control charts using α-cuts,” Information Sciences, vol. 179, no. 10, pp. 1542–1551, 2009. View at Publisher · View at Google Scholar
  8. C.-S. Hsieh, Y.-W. Chen, C.-H. Wu, and T. Huang, “Characteristics of fuzzy synthetic decision methods for measuring student achievement,” Quality and Quantity, vol. 46, no. 2, pp. 523–543, 2012. View at Publisher · View at Google Scholar · View at Scopus
  9. S. Ghobadi, K. Noghondarian, R. Noorossana, and S. M. S. Mirhosseini, “Developing a multivariate approach to monitor fuzzy quality profiles,” Quality and Quantity, vol. 48, no. 2, pp. 817–836, 2014. View at Publisher · View at Google Scholar · View at Scopus
  10. A. Faraz and A. F. Shapiro, “An application of fuzzy random variables to control charts,” Fuzzy Sets and Systems, vol. 161, no. 20, pp. 2684–2694, 2010. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  11. M.-H. Shu and H.-C. Wu, “Fuzzy x and R control charts: fuzzy dominance approach,” Computers and Industrial Engineering, vol. 61, no. 3, pp. 676–685, 2011. View at Publisher · View at Google Scholar · View at Scopus
  12. M. Gülbay and C. Kahraman, “Development of fuzzy process control charts and fuzzy unnatural pattern analyses,” Computational Statistics and Data Analysis, vol. 51, no. 1, pp. 434–451, 2006. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  13. M. Gülbay and C. Kahraman, “An alternative approach to fuzzy control charts: direct fuzzy approach,” Information Sciences, vol. 177, no. 6, pp. 1463–1480, 2007. View at Publisher · View at Google Scholar · View at Scopus
  14. A. Faraz and M. B. Moghadam, “Fuzzy control chart a better alternative for shewhart average chart,” Quality and Quantity, vol. 41, no. 3, pp. 375–385, 2007. View at Publisher · View at Google Scholar · View at Scopus
  15. T.-L. Nguyen, B.-M. Hsu, and M.-H. Shu, “New quantitative approach based on index of optimism for fuzzy judgement of online manufacturing process,” Materials Research Innovations, vol. 18, no. 1, pp. S2–S4, 2014. View at Publisher · View at Google Scholar · View at Scopus
  16. Z. S. Morabi, M. S. Owlia, M. Bashiri, and M. H. Doroudyan, “Multi-objective design of x control charts with fuzzy process parameters using the hybrid epsilon constraint PSO,” Applied Soft Computing Journal, vol. 30, pp. 390–399, 2015. View at Publisher · View at Google Scholar · View at Scopus
  17. J.-H. Wang and T. Raz, “On the construction of control charts using linguistic variables,” International Journal of Production Research, vol. 28, no. 3, pp. 477–487, 1990. View at Publisher · View at Google Scholar · View at Scopus
  18. A. Kanagawa, F. Tamaki, and H. Ohta, “Control charts for process average and variability based on linguistic data,” International Journal of Production Research, vol. 31, no. 4, pp. 913–922, 1993. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  19. M. Laviolette, J. W. Seaman, J. D. Barrett, and W. H. Woodall, “A probabilistic and statistical view of fuzzy methods,” Technometrics, vol. 37, no. 3, pp. 249–261, 1995. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  20. K. Asai, Fuzzy Systems for Management, IOS Press, Amsterdam, The Netherlands, 1995.
  21. W. Woodall, K. L. Tsui, and G. L. Tucker, “A review of statistical and fuzzy control charts based on categorical data,” in Frontiers in Statistical Quality Control 5, H. J. Lenz and P. T. Wilrich, Eds., Physica, Heidelberg, Germany, 1997. View at Google Scholar
  22. H. M. Alizadeh and S. M. T. F. Ghomi, “Fuzzy development of Mean and Range control charts using statistical properties of different representative values,” Journal of Intelligent and Fuzzy Systems, vol. 22, no. 5-6, pp. 253–265, 2011. View at Publisher · View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  23. C.-B. Cheng, “Fuzzy process control: construction of control charts with fuzzy numbers,” Fuzzy Sets and Systems, vol. 154, no. 2, pp. 287–303, 2005. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  24. R. Guo, R. Zhao, and C. Cheng, “Quality control charts for random fuzzy manufacturing environments,” Journal of Quality, vol. 15, pp. 101–115, 2008. View at Google Scholar
  25. P. Grzegorzewski and O. Hryniewicz, “Soft methods in statistical quality control,” Control and Cybernetics, vol. 29, no. 1, pp. 119–140, 2000. View at Google Scholar · View at Zentralblatt MATH · View at Scopus
  26. C.-F. Chien, J.-H. Chen, and C.-C. Wei, “Constructing a comprehensive modular fuzzy ranking framework and illustrations,” Journal of Quality, vol. 18, no. 4, pp. 333–349, 2011. View at Google Scholar · View at Scopus
  27. Y. Yuan, “Criteria for evaluating fuzzy ranking methods,” Fuzzy Sets and Systems, vol. 43, no. 2, pp. 139–157, 1991. View at Publisher · View at Google Scholar · View at MathSciNet · View at Scopus
  28. T. L. Nguyen, M. H. Shu, Y. F. Huang, and B. M. Hsu, “Fuzzy x and s charts: left & Right dominance approach,” in Advanced Methods for Computing Collective Intelligence, N. T. Nguyen, B. Trawiński, R. Katarzyniak, and G. S. Jo, Eds., pp. 355–366, Springer, Berlin, Germany, 2013. View at Google Scholar
  29. V. F. Yu and L. Q. Dat, “An improved ranking method for fuzzy numbers with integral values,” Applied Soft Computing Journal, vol. 14, pp. 603–608, 2014. View at Publisher · View at Google Scholar · View at Scopus
  30. Y.-C. Lin and C.-Y. Chou, “On the design of variable sample size and sampling intervals X̄ charts under non-normality,” International Journal of Production Economics, vol. 96, no. 2, pp. 249–261, 2005. View at Publisher · View at Google Scholar · View at Scopus
  31. R. L. Scheaffer, M. S. Mulekar, and J. T. McClave, Probability & Statistics for Engineers, Brooks/Cole, Cengage Learning, 5th edition, 2011.
  32. L. A. Zadeh, “Fuzzy sets,” Information and Control, vol. 8, pp. 338–353, 1965. View at Google Scholar
  33. K. Wang, S. Liu, F. Chen, Z. Liu, and X. Luo, “Effect of manufacturing defects on optical performance of discontinuous freeform lenses,” Optics Express, vol. 17, no. 7, pp. 5457–5465, 2009. View at Publisher · View at Google Scholar · View at Scopus
  34. E. P. Lavinn, Specular Reflection, Monographs on Applied Optics 2, Elsevier, New York, NY, USA, 1971.
  35. P. Beckmann and A. Spizzichino, The Scattering of Electromagnetic Waves from Rough Surfaces, Artech House Publishers, New York, NY, USA, 1987.
  36. U. Persson, “In-process measurement of surface roughness using light scattering,” Wear, vol. 215, no. 1-2, pp. 54–58, 1998. View at Publisher · View at Google Scholar · View at Scopus
  37. C. J. Tay, S. H. Wang, C. Quan, and C. K. Ng, “Surface roughness measurement of semi-conductor wafers using a modified total integrated scattering model,” Optik, vol. 113, no. 7, pp. 317–321, 2002. View at Google Scholar · View at Scopus
  38. H.-H. Tsai and H.-P. Feng, “On-line inspection of the surface roughness of workpiece in ultraprecision machining,” Advanced Materials Research, vol. 126–128, pp. 744–751, 2010. View at Publisher · View at Google Scholar · View at Scopus
  39. R. S. Retherford, R. Sabia, and V. P. Sokira, “Effect of surface quality on transmission performance for (111) CaF2,” Applied Surface Science, vol. 183, no. 3-4, pp. 264–269, 2001. View at Publisher · View at Google Scholar · View at Scopus
  40. M. S. Lou, J. C. Chen, and C. M. Li, “Surface roughness prediction technique for CNC end-milling,” Journal of Industrial Technology, vol. 15, no. 1, pp. 1–6, 1998. View at Google Scholar · View at Scopus
  41. G. P. Singh, J. Alphonsa, P. K. Barhai, P. A. Rayjada, P. M. Raole, and S. Mukherjee, “Effect of surface roughness on the properties of the layer formed on AISI 304 stainless steel after plasma nitriding,” Surface and Coatings Technology, vol. 200, no. 20-21, pp. 5807–5811, 2006. View at Publisher · View at Google Scholar · View at Scopus
  42. S. W. Wai, G. M. Spinks, H. R. Brown, and M. Swain, “Surface roughness: its implications and inference with regards to ultra microindentation measurements of polymer mechanical properties,” Polymer Testing, vol. 23, no. 5, pp. 501–507, 2004. View at Publisher · View at Google Scholar · View at Scopus
  43. X. Zhao and Z. Gao, “Surface roughness measurement using spatial-average analysis of objective speckle pattern in specular direction,” Optics and Lasers in Engineering, vol. 47, no. 11, pp. 1307–1316, 2009. View at Publisher · View at Google Scholar · View at Scopus
  44. R. Navarro, J. A. Méndez-Morales, and J. Santamaría, “Optical quality of the eye lens surfaces from roughness and diffusion measurements,” Journal of the Optical Society of America A: Optics and Image Science, and Vision, vol. 3, no. 2, pp. 228–234, 1986. View at Publisher · View at Google Scholar · View at Scopus
  45. E. P. DeGarmo, J. T. Black, and R. A. Kohser, Materials and Processes in the Manufacturing, John Wiley & Sons, 9th edition, 2003.
  46. R. Freedman, R. Geller, and W. J. Kaufmann, Universe, W.H. Freeman & Co., New York, NY, USA, 9th edition, 2010.
  47. J. J. Buckley, Studies in Fuzziness and Soft Computing, vol. 196, Springer, 2006.