Table of Contents Author Guidelines Submit a Manuscript
Complexity
Volume 2017, Article ID 5156264, 8 pages
https://doi.org/10.1155/2017/5156264
Research Article

Modeling and Error Compensation of Robotic Articulated Arm Coordinate Measuring Machines Using BP Neural Network

1Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming, China
2School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China

Correspondence should be addressed to Guanbin Gao; moc.361@oagbg

Received 14 July 2017; Accepted 17 September 2017; Published 18 October 2017

Academic Editor: Guang Li

Copyright © 2017 Guanbin Gao et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Linked References

  1. B. Benciolini and A. Vitti, “A new quaternion based kinematic model for the operation and the identification of an articulated arm coordinate measuring machine inspired by the geodetic methodology,” Mechanism and Machine Theory, vol. 112, pp. 192–204, 2017. View at Publisher · View at Google Scholar · View at Scopus
  2. G. Gao, H. Zhang, X. Wu, and Y. Guo, “Structural Parameter Identification of Articulated Arm Coordinate Measuring Machines,” Mathematical Problems in Engineering, vol. 2016, Article ID 4063046, 2016. View at Publisher · View at Google Scholar · View at Scopus
  3. L. Yu, H. Zhang, G. Gao, W. Wang, J. Na, and X. Wu, “Kinematic modeling and verification of an articulated arm coordinate measuring machine,” in Proceedings of the Seventh International Symposium on Precision Mechanical Measurements, Xia'men, China, August, 2015. View at Publisher · View at Google Scholar
  4. R. Acero, A. Brau, J. Santolaria, and M. Pueo, “Evaluation of a metrology platform for an articulated arm coordinate measuring machine verification under the ASME B89.4.22-2004 and VDI 2617_9-2009 standards,” Journal of Manufacturing Systems, vol. 42, pp. 57–68, 2017. View at Publisher · View at Google Scholar · View at Scopus
  5. K. Ostrowska, A. Gąska, R. Kupiec, J. Sładek, and K. Gromczak, “Verification of Articulated Arm Coordinate Measuring Machines Accuracy Using LaserTracer System as Standard of Length,” Mapan - Journal of Metrology Society of India, vol. 31, no. 4, pp. 241–256, 2016. View at Publisher · View at Google Scholar · View at Scopus
  6. G. Gao, J. Na, X. Wu, and Y. Guo, “A self-calibration method for articulated arm coordinate measuring machines,” Transactions of the Canadian Society for Mechanical Engineering, vol. 40, no. 4, pp. 645–655, 2016. View at Google Scholar · View at Scopus
  7. X. Feng, C. Xu, J. Zhang, Q. Xu, and Y. Fei, “The establishment and testing of a model called virtual articulated arm coordinate measuring machine,” Chongqing Daxue Xuebao/Journal of Chongqing University, vol. 39, no. 6, pp. 135–140, 2016. View at Publisher · View at Google Scholar · View at Scopus
  8. Y. Xu and Q. Gao, “AACMM Position accuracy distribution research based on the accuracy of grating encoder,” Chinese Journal of Scientific Instrument, vol. 38, pp. 336–342, 2017. View at Google Scholar
  9. D. Zheng, S. Xie, Z. Luo, J. Zhang, and T. Zhou, “Circular grating eccentricity error modeling and correction of articulated arm CMMs,” Journal of Electronic Measurement and Instrument, vol. 30, pp. 1568–1574, 2016. View at Google Scholar
  10. X. Wang, X. Zhang, L. Chen, H. Yang, and H. Zhang, “Physical design of articulated arm coordinate measuring machine and study on calibration method for parameters of articulated arm,” World Sci-Tech R & D, vol. 38, pp. 1234–1236, 2016. View at Google Scholar
  11. X. Wang, H. Wang, Y. Lu, and P. Zhang, “Parameter calibration method of articulated arm coordinate measuring machine,” Nongye Jixie Xuebao/Transactions of the Chinese Society for Agricultural Machinery, vol. 47, no. 6, pp. 408–412, 2016. View at Publisher · View at Google Scholar · View at Scopus
  12. Y. Lu, P. Zhang, H. Wang, X. Wang, and C. Zhao, “Modeling of measurement space error of AACMM,” in Proceedings of the 8th International Conference on Intelligent Human-Machine Systems and Cybernetics, IHMSC 2016, pp. 416–419, Hangzhou, China, September 2016. View at Publisher · View at Google Scholar · View at Scopus
  13. J. Santolaria, J.-J. Aguilar, J.-A. Yagüe, and J. Pastor, “Kinematic parameter estimation technique for calibration and repeatability improvement of articulated arm coordinate measuring machines,” Precision Engineering, vol. 32, no. 4, pp. 251–268, 2008. View at Publisher · View at Google Scholar · View at Scopus
  14. D. Zheng, Z. Xiao, and X. Xia, “Multiple measurement models of articulated arm coordinate measuring machines,” Chinese Journal of Mechanical Engineering, vol. 28, no. 5, pp. 994–998, 2015. View at Publisher · View at Google Scholar · View at Scopus
  15. J. Denavit and R. S. Hartenberg, “A kinematic notation for lower-pair mechanisms based on matrices,” Transactions of the ASME, vol. 22, pp. 215–221, 1955. View at Google Scholar · View at MathSciNet
  16. D. Zipser and R. A. Andersen, “A back-propagation programmed network that simulates response properties of a subset of posterior parietal neurons,” Nature, vol. 331, no. 6158, pp. 679–684, 1988. View at Publisher · View at Google Scholar · View at Scopus
  17. C. Yang, Y. Jiang, Z. Li, W. He, and C.-Y. Su, “Neural control of bimanual robots with guaranteed global stability and motion precision,” IEEE Transactions on Industrial Informatics, vol. 13, pp. 1162–1171, 2017. View at Publisher · View at Google Scholar
  18. K. Khan and A. Sahai, “A comparison of BA, GA, PSO, BP and LM for training feed forward neural networks in e-learning context,” International Journal of Intelligent Systems and Applications, vol. 4, no. 7, pp. 23–29, 2012. View at Publisher · View at Google Scholar
  19. I. A. Basheer and M. Hajmeer, “Artificial neural networks: fundamentals, computing, design, and application,” Journal of Microbiological Methods, vol. 43, no. 1, pp. 3–31, 2000. View at Publisher · View at Google Scholar · View at Scopus
  20. C. Yang, K. Huang, H. Cheng, Y. Li, and C. Su, “Haptic identification by ELM-controlled uncertain manipulator,” IEEE Transactions on Systems, Man, and Cybernetics: Systems, pp. 1–12, 2017. View at Google Scholar
  21. M. Duwensee, F. E. Talke, S. Suzuki, J. Lin, and D. Wachenschwanz, “Direct simulation monte carlo method for the simulation of rarefied gas flow in discrete track recording head/disk interfaces,” Journal of Tribology, vol. 131, no. 1, pp. 1–7, 2009. View at Publisher · View at Google Scholar · View at Scopus
  22. X. Leng, J. Wang, H. Ji et al., “Prediction of size-fractionated airborne particle-bound metals using MLR, BP-ANN and SVM analyses,” Chemosphere, vol. 180, pp. 513–522, 2017. View at Publisher · View at Google Scholar
  23. Z. Li and X. Zhao, “BP artificial neural network based wave front correction for sensor-less free space optics communication,” Optics Communications, vol. 385, pp. 219–228, 2017. View at Publisher · View at Google Scholar · View at Scopus
  24. C. Yang, X. Wang, Z. Li, Y. Li, and C. Su, “Teleoperation control based on combination of wave variable and neural networks,” IEEE Transactions on Systems, Man, and Cybernetics: Systems, 2017. View at Publisher · View at Google Scholar
  25. C. Yang, J. Luo, Y. Pan, Z. Liu, and C. Su, “Personalized variable gain control with tremor attenuation for robot teleoperation,” IEEE Transactions on Systems, Man, and Cybernetics: Systems, pp. 1–12, 2017. View at Publisher · View at Google Scholar